Re: [Freedreno] [PATCH v7 0/6] clk/qcom: Support gdsc collapse polling using 'reset' interface
From: Akhil P Oommen
Date: Fri Dec 02 2022 - 02:02:07 EST
On 12/2/2022 4:27 AM, Bjorn Andersson wrote:
> On Wed, Oct 05, 2022 at 02:36:58PM +0530, Akhil P Oommen wrote:
> @Ulf, Akhil has a power-domain for a piece of hardware which may be
> voted active by multiple different subsystems (co-processors/execution
> contexts) in the system.
>
> As such, during the powering down sequence we don't wait for the
> power-domain to turn off. But in the event of an error, the recovery
> mechanism relies on waiting for the hardware to settle in a powered off
> state.
>
> The proposal here is to use the reset framework to wait for this state
> to be reached, before continuing with the recovery mechanism in the
> client driver.
>
> Given our other discussions on quirky behavior, do you have any
> input/suggestions on this?
>
>> Some clients like adreno gpu driver would like to ensure that its gdsc
>> is collapsed at hardware during a gpu reset sequence. This is because it
>> has a votable gdsc which could be ON due to a vote from another subsystem
>> like tz, hyp etc or due to an internal hardware signal. To allow
>> this, gpucc driver can expose an interface to the client driver using
>> reset framework. Using this the client driver can trigger a polling within
>> the gdsc driver.
> @Akhil, this description is fairly generic. As we've reached the state
> where the hardware has settled and we return to the client, what
> prevents it from being powered up again?
>
> Or is it simply a question of it hitting the powered-off state, not
> necessarily staying there?
Correct. It doesn't need to stay there. The intention is to hit the powered-off state at least once to clear all the internal hw states (basically a hw reset).
-Akhil.
>
> Regards,
> Bjorn
>
>> This series is rebased on top of qcom/linux:for-next branch.
>>
>> Related discussion: https://patchwork.freedesktop.org/patch/493144/
>>
>> Changes in v7:
>> - Update commit message (Bjorn)
>> - Rebased on top of qcom/linux:for-next branch.
>>
>> Changes in v6:
>> - No code changes in this version. Just captured the Acked-by tags
>>
>> Changes in v5:
>> - Nit: Remove a duplicate blank line (Krzysztof)
>>
>> Changes in v4:
>> - Update gpu dt-binding schema
>> - Typo fix in commit text
>>
>> Changes in v3:
>> - Use pointer to const for "struct qcom_reset_ops" in qcom_reset_map (Krzysztof)
>>
>> Changes in v2:
>> - Return error when a particular custom reset op is not implemented. (Dmitry)
>>
>> Akhil P Oommen (6):
>> dt-bindings: clk: qcom: Support gpu cx gdsc reset
>> clk: qcom: Allow custom reset ops
>> clk: qcom: gdsc: Add a reset op to poll gdsc collapse
>> clk: qcom: gpucc-sc7280: Add cx collapse reset support
>> dt-bindings: drm/msm/gpu: Add optional resets
>> arm64: dts: qcom: sc7280: Add Reset support for gpu
>>
>> .../devicetree/bindings/display/msm/gpu.yaml | 6 +++++
>> arch/arm64/boot/dts/qcom/sc7280.dtsi | 3 +++
>> drivers/clk/qcom/gdsc.c | 23 ++++++++++++++----
>> drivers/clk/qcom/gdsc.h | 7 ++++++
>> drivers/clk/qcom/gpucc-sc7280.c | 10 ++++++++
>> drivers/clk/qcom/reset.c | 27 +++++++++++++++++++++-
>> drivers/clk/qcom/reset.h | 8 +++++++
>> include/dt-bindings/clock/qcom,gpucc-sc7280.h | 3 +++
>> 8 files changed, 82 insertions(+), 5 deletions(-)
>>
>> --
>> 2.7.4
>>