Re: [PATCH v3] 9p/fd: set req refcount to zero to avoid uninitialized usage

[asmadeus]

Schspa Shi wrote on Thu, Dec 01, 2022 at 11:33:10AM +0800:
> When the new request allocated, the refcount will be zero if it is resued
> one. But if the request is newly allocated from slab, it is not fully
> initialized before add it to idr.
> 
> If the p9_read_work got a response before the refcount initiated. It will
> use a uninitialized req, which will result in a bad request data struct.
> 
> Here is the logs from syzbot.
> 
> Corrupted memory at 0xffff88807eade00b [ 0xff 0x07 0x00 0x00 0x00 0x00
> 0x00 0x00 . . . . . . . . ] (in kfence-#110):
>  p9_fcall_fini net/9p/client.c:248 [inline]
>  p9_req_put net/9p/client.c:396 [inline]
>  p9_req_put+0x208/0x250 net/9p/client.c:390
>  p9_client_walk+0x247/0x540 net/9p/client.c:1165
>  clone_fid fs/9p/fid.h:21 [inline]
>  v9fs_fid_xattr_set+0xe4/0x2b0 fs/9p/xattr.c:118
>  v9fs_xattr_set fs/9p/xattr.c:100 [inline]
>  v9fs_xattr_handler_set+0x6f/0x120 fs/9p/xattr.c:159
>  __vfs_setxattr+0x119/0x180 fs/xattr.c:182
>  __vfs_setxattr_noperm+0x129/0x5f0 fs/xattr.c:216
>  __vfs_setxattr_locked+0x1d3/0x260 fs/xattr.c:277
>  vfs_setxattr+0x143/0x340 fs/xattr.c:309
>  setxattr+0x146/0x160 fs/xattr.c:617
>  path_setxattr+0x197/0x1c0 fs/xattr.c:636
>  __do_sys_setxattr fs/xattr.c:652 [inline]
>  __se_sys_setxattr fs/xattr.c:648 [inline]
>  __ia32_sys_setxattr+0xc0/0x160 fs/xattr.c:648
>  do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
>  __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
>  do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203
>  entry_SYSENTER_compat_after_hwframe+0x70/0x82
> 
> Below is a similar scenario, the scenario in the syzbot log looks more
> complicated than this one, but this patch can fix it.
> 
>      T21124                   p9_read_work
> ======================== second trans =================================
> p9_client_walk
>   p9_client_rpc
>     p9_client_prepare_req
>       p9_tag_alloc
>         req = kmem_cache_alloc(p9_req_cache, GFP_NOFS);
>         tag = idr_alloc
>         << preempted >>
>         req->tc.tag = tag;
>                             /* req->[refcount/tag] == uninitialized */
>                             m->rreq = p9_tag_lookup(m->client, m->rc.tag);
>                               /* increments uninitalized refcount */
> 
>         refcount_set(&req->refcount, 2);
>                             /* cb drops one ref */
>                             p9_client_cb(req)
>                             /* reader thread drops its ref:
>                                request is incorrectly freed */
>                             p9_req_put(req)
>     /* use after free and ref underflow */
>     p9_req_put(req)
> 
> To fix it, we can initize the refcount to zero before add to idr.

(fixed initialize typo here)

> Reported-by: syzbot+8f1060e2aaf8ca55220b@xxxxxxxxxxxxxxxxxxxxxxxxx
> Signed-off-by: Schspa Shi <schspa@xxxxxxxxx>
> 
> --
> 
> Changelog:
> v1 -> v2:
>         - Set refcount to fix the problem.
> v2 -> v3:
>         - Comment messages improve as asmadeus suggested.

Just a note: when applying a patch with git am, this goes into the
commit message -- please include the changelog below the git's three
dashes instead (anything between the three dashes and the 'diff --git'
below:
> ---
>  net/9p/client.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/net/9p/client.c b/net/9p/client.c


Christian Schoenebeck wrote on Fri, Dec 02, 2022 at 12:48:39PM +0100:
> > +	/* refcount needs to be set to 0 before inserting into the idr
> > +	 * so p9_tag_lookup does not accept a request that is not fully
> > +	 * initialized. refcount_set to 2 below will mark request live.
> > +	 */
> > +	refcount_set(&req->refcount, 0);
> 
> I would s/live/ready for being used/, but comment should be clear enough
> anyway.

I blame golfing to fit into three lines, sorry!
Since it was my suggestion, I've taken the liberty to change 'live' to
'ready' as an half step; I think it's clearer than live and probably
understandable enough.

I've pushed this to my next branch and will submit to Linus for the
merge window in a couple of weeks, no point in rushing this to stable
unless it gets snatched through the net tree first...

-- 
Dominique