[PATCH v6 3/5] media: i2c: imx334: add missing reset values for mode_3840x2160_regs[]
From: shravan kumar
Date: Mon Dec 05 2022 - 00:20:30 EST
From: Shravan Chippa <shravan.chippa@xxxxxxxxxxxxx>
There are some missing reset reg_mode values for the 3840x2160@60 resolution.
The camera sensor still works in 3840x2160@60 resolution mode because of the
register reset values. This is an issue when we change the modes dynamically.
As an example, when we change the mode from 1920x1080@30 resolution to
3840x2160@60 resoultion then the mode values will be written to the registers
from the array mode_3840x2160_regs[] which gives the wrong output which is
incorrect resolution.
So add the missing reset values to the mode_3840x2160_regs[].
Signed-off-by: Shravan Chippa <shravan.chippa@xxxxxxxxxxxxx>
---
drivers/media/i2c/imx334.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
index a742b60ea3b0..1fa7e3711c3d 100644
--- a/drivers/media/i2c/imx334.c
+++ b/drivers/media/i2c/imx334.c
@@ -166,6 +166,7 @@ static const struct imx334_reg mode_3840x2160_regs[] = {
{0x3288, 0x21},
{0x328a, 0x02},
{0x302c, 0x3c},
+ {0x302d, 0x00},
{0x302e, 0x00},
{0x302f, 0x0f},
{0x3076, 0x70},
@@ -240,7 +241,26 @@ static const struct imx334_reg mode_3840x2160_regs[] = {
{0x3794, 0x7a},
{0x3796, 0xa1},
{0x3e04, 0x0e},
+ {0x319e, 0x00},
{0x3a00, 0x01},
+ {0x3A18, 0xBF},
+ {0x3A19, 0x00},
+ {0x3A1A, 0x67},
+ {0x3A1B, 0x00},
+ {0x3A1C, 0x6F},
+ {0x3A1D, 0x00},
+ {0x3A1E, 0xD7},
+ {0x3A1F, 0x01},
+ {0x3A20, 0x6F},
+ {0x3A21, 0x00},
+ {0x3A22, 0xCF},
+ {0x3A23, 0x00},
+ {0x3A24, 0x6F},
+ {0x3A25, 0x00},
+ {0x3A26, 0xB7},
+ {0x3A27, 0x00},
+ {0x3A28, 0x5F},
+ {0x3A29, 0x00},
};
/* Supported sensor mode configurations */
--
2.34.1