Re: [PATCH v3 0/6] soc: qcom: add support for the I2C Master Hub

[Neil Armstrong]

On 05/12/2022 09:31, Wolfram Sang wrote:
> On Thu, Dec 01, 2022 at 11:49:21PM +0100, Wolfram Sang wrote:
> > On Tue, Nov 29, 2022 at 03:47:00PM +0100, Neil Armstrong wrote:
> > > The I2C Master Hub is a stripped down version of the GENI Serial Engine
> > > QUP Wrapper Controller but only supporting I2C serial engines without
> > > DMA support.
> > >
> > > The I2C Master Hub only supports a variant of the I2C serial engine with:
> > > - a separate "core" clock
> > > - no DMA support
> > > - non discoverable fixed FIFO size
> > >
> > > Since DMA isn't supported, the wrapper doesn't need the Master AHB clock
> > > and the iommus property neither.
> > >
> > > This patchset adds the bindings changes to the QUPv3 wrapper and I2C serial
> > > element bindings to reflect the different resources requirements.
> > >
> > > In order to reuse the QUPv3 wrapper and I2C serial element driver support,
> > > the I2C Master Hub requirements are expressed in new desc structs passed
> > > as device match data.
> >
> > Is everyone fine if I take all this via the I2C tree?
>
> I did this now.
>
> All applied to for-next, thanks!

Thanks !

Neil