Re: [PATCH v7 4/4] thermal: mediatek: add another get_temp ops for thermal sensors
From: Amjad Ouled-Ameur
Date: Mon Dec 05 2022 - 05:41:14 EST
Hi Daniel,
On Sun Dec 4, 2022 at 6:26 PM CET, Daniel Lezcano wrote:
> On 18/11/2022 12:04, Amjad Ouled-Ameur wrote:
> > Provide thermal zone to read thermal sensor in the SoC. We can read all the
> > thermal sensors value in the SoC by the node /sys/class/thermal/
> >
> > In mtk_thermal_bank_temperature, return -EAGAIN instead of -EACCESS
> > on the first read of sensor that often are bogus values.
> > This can avoid following warning on boot:
> >
> > thermal thermal_zone6: failed to read out thermal zone (-13)
> >
> > Signed-off-by: Michael Kao <michael.kao@xxxxxxxxxxxx>
> > Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
> > Signed-off-by: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx>
> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
> > ---
> > drivers/thermal/mtk_thermal.c | 99 ++++++++++++++++++++++++++++++++-----------
> > 1 file changed, 74 insertions(+), 25 deletions(-)
> >
> > diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> > index 3a5df1440822..b1f4d19edd4f 100644
> > --- a/drivers/thermal/mtk_thermal.c
> > +++ b/drivers/thermal/mtk_thermal.c
> > @@ -259,6 +259,11 @@ enum mtk_thermal_version {
> >
> > struct mtk_thermal;
> >
> > +struct mtk_thermal_zone {
> > + struct mtk_thermal *mt;
> > + int id;
> > +};
> > +
> > struct thermal_bank_cfg {
> > unsigned int num_sensors;
> > const int *sensors;
> > @@ -307,6 +312,8 @@ struct mtk_thermal {
> >
> > const struct mtk_thermal_data *conf;
> > struct mtk_thermal_bank banks[MAX_NUM_ZONES];
> > +
> > + int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw);
> > };
> >
> > /* MT8183 thermal sensor data */
> > @@ -709,6 +716,29 @@ static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
> > mutex_unlock(&mt->lock);
> > }
> >
> > +static int _get_sensor_temp(struct mtk_thermal *mt, int id)
> > +{
> > + u32 raw;
> > + int temp;
> > +
> > + const struct mtk_thermal_data *conf = mt->conf;
> > +
> > + raw = readl(mt->thermal_base + conf->msr[id]);
> > +
> > + temp = mt->raw_to_mcelsius(mt, id, raw);
> > +
> > + /*
> > + * The first read of a sensor often contains very high bogus
> > + * temperature value. Filter these out so that the system does
> > + * not immediately shut down.
> > + */
> > +
> > + if (temp > 200000)
> > + return -EAGAIN;
> > + else
> > + return temp;
> > +}
> > +
> > /**
> > * mtk_thermal_bank_temperature - get the temperature of a bank
> > * @bank: The bank
> > @@ -721,26 +751,9 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
> > struct mtk_thermal *mt = bank->mt;
> > const struct mtk_thermal_data *conf = mt->conf;
> > int i, temp = INT_MIN, max = INT_MIN;
> > - u32 raw;
> >
> > for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
> > - raw = readl(mt->thermal_base + conf->msr[i]);
> > -
> > - if (mt->conf->version == MTK_THERMAL_V1) {
> > - temp = raw_to_mcelsius_v1(
> > - mt, conf->bank_data[bank->id].sensors[i], raw);
> > - } else {
> > - temp = raw_to_mcelsius_v2(
> > - mt, conf->bank_data[bank->id].sensors[i], raw);
> > - }
> > -
> > - /*
> > - * The first read of a sensor often contains very high bogus
> > - * temperature value. Filter these out so that the system does
> > - * not immediately shut down.
> > - */
> > - if (temp > 200000)
> > - temp = 0;
> > + temp = _get_sensor_temp(mt, i);
> >
> > if (temp > max)
> > max = temp;
> > @@ -749,9 +762,10 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
> > return max;
> > }
> >
> > -static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
> > +static int mtk_read_temp(struct thermal_zone_device *tzdev, int *temperature)
> > {
> > - struct mtk_thermal *mt = tz->devdata;
> > + struct mtk_thermal_zone *tz = tzdev->devdata;
> > + struct mtk_thermal *mt = tz->mt;
> > int i;
> > int tempmax = INT_MIN;
> >
> > @@ -770,10 +784,28 @@ static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
> > return 0;
> > }
> >
> > +static int mtk_read_sensor_temp(struct thermal_zone_device *tzdev, int *temperature)
> > +{
> > + struct mtk_thermal_zone *tz = tzdev->devdata;
> > + struct mtk_thermal *mt = tz->mt;
> > + int id = tz->id - 1;
> > +
> > + if (id < 0)
> > + return -EACCES;
> > +
> > + *temperature = _get_sensor_temp(mt, id);
> > +
> > + return 0;
> > +}
> > +
> > static const struct thermal_zone_device_ops mtk_thermal_ops = {
> > .get_temp = mtk_read_temp,
> > };
> >
> > +static const struct thermal_zone_device_ops mtk_thermal_sensor_ops = {
> > + .get_temp = mtk_read_sensor_temp,
> > +};
> > +
> > static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
> > u32 apmixed_phys_base, u32 auxadc_phys_base,
> > int ctrl_id)
> > @@ -1072,6 +1104,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
> > u64 auxadc_phys_base, apmixed_phys_base;
> > struct thermal_zone_device *tzdev;
> > void __iomem *apmixed_base, *auxadc_base;
> > + struct mtk_thermal_zone *tz;
> >
> > mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
> > if (!mt)
> > @@ -1150,6 +1183,9 @@ static int mtk_thermal_probe(struct platform_device *pdev)
> >
> > mtk_thermal_turn_on_buffer(mt, apmixed_base);
> >
> > + mt->raw_to_mcelsius = (mt->conf->version == MTK_THERMAL_V1) ?
> > + raw_to_mcelsius_v1 : raw_to_mcelsius_v2;
> > +
> > if (mt->conf->version == MTK_THERMAL_V2) {
> > mtk_thermal_release_periodic_ts(mt, auxadc_base);
> > }
> > @@ -1161,11 +1197,24 @@ static int mtk_thermal_probe(struct platform_device *pdev)
> >
> > platform_set_drvdata(pdev, mt);
> >
> > - tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
> > - &mtk_thermal_ops);
> > - if (IS_ERR(tzdev)) {
> > - ret = PTR_ERR(tzdev);
> > - goto err_disable_clk_peri_therm;
> > + for (i = 0; i < mt->conf->num_sensors + 1; i++) {
> > + tz = devm_kmalloc(&pdev->dev, sizeof(*tz), GFP_KERNEL);
> > + if (!tz)
> > + return -ENOMEM;
> > +
> > + tz->mt = mt;
> > + tz->id = i;
> > +
> > + tzdev = devm_thermal_of_zone_register(&pdev->dev, i, tz, (i == 0) ?
> > + &mtk_thermal_ops :
> > + &mtk_thermal_sensor_ops);
>
> Here you use again the aggregation
I addressed this concern in V6, could you please take a look and let me
know what you think [0].
[0]: https://lore.kernel.org/all/5eb0cdc2-e9f9-dd42-bf80-b7dcd8bcc196@xxxxxxxxxxxx/
Regards,
Amjad
>
> > +
> > + if (IS_ERR(tzdev)) {
> > + ret = PTR_ERR(tzdev);
> > + if (ret == -ENODEV)
> > + continue;
> > + goto err_disable_clk_peri_therm;
> > + }
> > }
> >
> > ret = devm_thermal_add_hwmon_sysfs(tzdev);
> >
>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog