Re: [PATCH v4 08/23] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8250 SoC

[Dmitry Baryshkov]

On 1 December 2022 20:43:13 GMT+03:00, Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> wrote:
>UFS PHY in SM8250 SoC is capable of operating at HS G4 mode. Hence, add the
>required register settings using the tables_hs_g4 struct instance. This
>also requires a separate qmp_phy_cfg for SM8250 instead of reusing SM8150.
>
>Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
>Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>


>---
> .../phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h    |  1 +
> drivers/phy/qualcomm/phy-qcom-qmp-ufs.c       | 62 ++++++++++++++++++-
> 2 files changed, 62 insertions(+), 1 deletion(-)
>
>diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h
>index bcca23493b7e..3aa4232f84a6 100644
>--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h
>+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h
>@@ -13,6 +13,7 @@
> #define QPHY_V5_PCS_UFS_PLL_CNTL			0x02c
> #define QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL		0x030
> #define QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL		0x038
>+#define QPHY_V5_PCS_UFS_BIST_FIXED_PAT_CTRL		0x060
> #define QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY		0x074
> #define QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY		0x0b4
> #define QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL		0x124
>diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>index 269f96a0f752..d5324c4e8513 100644
>--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>@@ -449,6 +449,34 @@ static const struct qmp_phy_init_tbl sm8150_ufsphy_hs_g4_pcs[] = {
> 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_BIST_FIXED_PAT_CTRL, 0x0a),
> };
> 
>+static const struct qmp_phy_init_tbl sm8250_ufsphy_hs_g4_tx[] = {
>+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xe5),
>+};
>+
>+static const struct qmp_phy_init_tbl sm8250_ufsphy_hs_g4_rx[] = {
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x81),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0e),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x6f),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x00),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x09),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x20),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0x80),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x01),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x2c),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x6d),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0x6d),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xed),
>+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x3c),
>+};
>+
> static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes[] = {
> 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
> 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
>@@ -805,6 +833,38 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
> 	.regs			= sm8150_ufsphy_regs_layout,
> };
> 
>+static const struct qmp_phy_cfg sm8250_ufsphy_cfg = {
>+	.lanes			= 2,
>+
>+	.tbls = {
>+		.serdes		= sm8150_ufsphy_serdes,
>+		.serdes_num	= ARRAY_SIZE(sm8150_ufsphy_serdes),
>+		.tx		= sm8150_ufsphy_tx,
>+		.tx_num		= ARRAY_SIZE(sm8150_ufsphy_tx),
>+		.rx		= sm8150_ufsphy_rx,
>+		.rx_num		= ARRAY_SIZE(sm8150_ufsphy_rx),
>+		.pcs		= sm8150_ufsphy_pcs,
>+		.pcs_num	= ARRAY_SIZE(sm8150_ufsphy_pcs),
>+	},
>+	.tbls_hs_b = {
>+		.serdes		= sm8150_ufsphy_hs_b_serdes,
>+		.serdes_num	= ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes),
>+	},
>+	.tbls_hs_g4 = {
>+		.tx		= sm8250_ufsphy_hs_g4_tx,
>+		.tx_num		= ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx),
>+		.rx		= sm8250_ufsphy_hs_g4_rx,
>+		.rx_num		= ARRAY_SIZE(sm8250_ufsphy_hs_g4_rx),
>+		.pcs		= sm8150_ufsphy_hs_g4_pcs,
>+		.pcs_num	= ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs),
>+	},
>+	.clk_list		= sdm845_ufs_phy_clk_l,
>+	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
>+	.vreg_list		= qmp_phy_vreg_l,
>+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
>+	.regs			= sm8150_ufsphy_regs_layout,
>+};
>+
> static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
> 	.lanes			= 2,
> 
>@@ -1297,7 +1357,7 @@ static const struct of_device_id qmp_ufs_of_match_table[] = {
> 		.data = &sm8150_ufsphy_cfg,
> 	}, {
> 		.compatible = "qcom,sm8250-qmp-ufs-phy",
>-		.data = &sm8150_ufsphy_cfg,
>+		.data = &sm8250_ufsphy_cfg,
> 	}, {
> 		.compatible = "qcom,sm8350-qmp-ufs-phy",
> 		.data = &sm8350_ufsphy_cfg,

-- 
With best wishes
Dmitry