Re: [PATCH v4 10/23] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8350 SoC
From: Dmitry Baryshkov
Date: Mon Dec 05 2022 - 16:56:44 EST
On 1 December 2022 20:43:15 GMT+03:00, Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> wrote:
>UFS PHY in SM8350 SoC is capable of operating at HS G4 mode. Hence, add the
>required register settings using the tables_hs_g4 struct instance.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
>
>Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
>---
> drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 36 +++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
>diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>index 6c7c6a06fe3b..75e55c4181c9 100644
>--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>@@ -571,6 +571,34 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs[] = {
> QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> };
>
>+static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_tx[] = {
>+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xe5),
>+};
>+
>+static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_rx[] = {
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x81),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x6f),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x00),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x20),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0x80),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x01),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbf),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xbf),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0x7f),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x7f),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x2d),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x6d),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x6d),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xed),
>+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0x3c),
>+};
>+
>+static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_pcs[] = {
>+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_BIST_FIXED_PAT_CTRL, 0x0a),
>+};
>+
> struct qmp_ufs_offsets {
> u16 serdes;
> u16 pcs;
>@@ -875,6 +903,14 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
> .serdes = sm8350_ufsphy_hs_b_serdes,
> .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
> },
>+ .tbls_hs_g4 = {
>+ .tx = sm8350_ufsphy_g4_tx,
>+ .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx),
>+ .rx = sm8350_ufsphy_g4_rx,
>+ .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx),
>+ .pcs = sm8350_ufsphy_g4_pcs,
>+ .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
>+ },
> .clk_list = sdm845_ufs_phy_clk_l,
> .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> .vreg_list = qmp_phy_vreg_l,
--
With best wishes
Dmitry