Re: [PATCH] cpufreq: acpi: Defer setting boost MSRs

[stuart hayes]

On 12/5/2022 6:43 AM, Rafael J. Wysocki wrote:
> On Sun, Dec 4, 2022 at 8:20 PM stuart hayes <stuart.w.hayes@xxxxxxxxx> wrote:
> > On 12/4/2022 12:29 PM, Borislav Petkov wrote:
> > > On Thu, Nov 03, 2022 at 07:19:47PM +0100, Rafael J. Wysocki wrote:
> > > > On Wed, Nov 2, 2022 at 9:01 PM Stuart Hayes <stuart.w.hayes@xxxxxxxxx> wrote:
> > > > > When acpi-cpufreq is loaded, boost is enabled on every CPU (by setting an
> > > > > MSR) before the driver is registered with cpufreq.  This can be very time
> > > > > consuming, because it is done with a CPU hotplug startup callback, and
> > > > > cpuhp_setup_state() schedules the callback (cpufreq_boost_online()) to run
> > > > > on each CPU one at a time, waiting for each to run before calling the next.
> > > > >
> > > > > If cpufreq_register_driver() fails--if, for example, there are no ACPI
> > > > > P-states present--this is wasted time.
> > > > >
> > > > > Since cpufreq already sets up a CPU hotplug startup callback if and when
> > > > > acpi-cpufreq is registered, set the boost MSRs in acpi_cpufreq_cpu_init(),
> > > > > which is called by the cpufreq cpuhp callback.  This allows acpi-cpufreq to
> > > > > exit quickly if it is loaded but not needed.
> > > > >
> > > > > On one system with 192 CPUs, this patch speeds up boot by about 30 seconds.
> > > > >
> > > > > Signed-off-by: Stuart Hayes <stuart.w.hayes@xxxxxxxxx>
> > > > > ---
> > > > >    drivers/cpufreq/acpi-cpufreq.c | 31 +++----------------------------
> > > > >    1 file changed, 3 insertions(+), 28 deletions(-)
> > >
> > > ...
> > >
> > > > Applied as 6.2 material, thanks!
> > >
> > > My 32-bit Atom doesn't like this one. Reverting fixes it ofc.
> > >
> > > [   22.780260] unchecked MSR access error: WRMSR to 0x1a0 (tried to write 0x0000004364950488) at rIP: 0xf80b37d4 (boost_set_msr.isra.0+0x9c/0x114 [acpi_cpufreq])
> > > [   22.781186] Call Trace:
> > > [   22.781186]  boost_set_msr_each+0x15/0x1c [acpi_cpufreq]
> > > [   22.781186]  __flush_smp_call_function_queue+0x132/0x1cc
> > > [   22.781186]  ? sysvec_call_function+0x30/0x30
> > > [   22.781186]  generic_smp_call_function_single_interrupt+0x12/0x18
> > > [   22.781186]  __sysvec_call_function_single.constprop.0+0x43/0x1d8
> > > [   22.781186]  sysvec_call_function_single+0x18/0x30
> > > [   22.781186]  handle_exception+0x133/0x133
> > > [   22.781186] EIP: finish_task_switch.isra.0+0x124/0x3a8
> > > [   22.781186] Code: d8 e8 8c 16 92 00 85 f6 75 e8 a1 04 24 6c c2 85 c0 0f 8f 9b 00 00 00 89 d8 e8 e4 02 92 00 e8 53 9e 0b 00 fb 64 a1 40 f9 69 c2 <8b> 80 5c 0f 00 00 85 c0 0f 85 72 01 00 00 a1 28 24 6c c2 64 8b 15
> > > [   22.781186] EAX: c32e2700 EBX: f748af40 ECX: 00000000 EDX: c1c3876e
> > > [   22.781186] ESI: 00000000 EDI: 00000000 EBP: c3241f90 ESP: c3241f78
> > > [   22.781186] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00000206
> > > [   22.781186]  ? uevent_seqnum_show+0x1b/0x28
> > > [   22.781186]  ? pid_list_refill_irq+0x128/0x1c0
> > > [   22.781186]  ? sysvec_call_function+0x30/0x30
> > > [   22.781186]  ? pid_list_refill_irq+0x128/0x1c0
> > > [   22.781186]  ? sysvec_call_function+0x30/0x30
> > > [   22.781186]  ? finish_task_switch.isra.0+0x124/0x3a8
> > > [   22.781186]  schedule_tail+0x12/0x78
> > > [   22.781186]  schedule_tail_wrapper+0x9/0x10
> > > [   22.781186]  ret_from_fork+0x5/0x28
> > > [   22.781186] EIP: 0xb7fba549
> > > [   22.781186] Code: Unable to access opcode bytes at 0xb7fba51f.
> > > [   22.781186] EAX: 00000000 EBX: 01200011 ECX: 00000000 EDX: 00000000
> > > [   22.781186] ESI: 00000000 EDI: b7bfe868 EBP: 00000000 ESP: bfcfedc0
> > > [   22.781186] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246
> >
> > I believe I see the problem... acpi_cpufreq_cpu_init is calling set_boost() directly without checking to see if acpi_cpufreq_driver.set_boost was set, so it is trying to set the MSR on CPUs that don't support it.
> >
> > Thanks, I can submit a patch to fix this.
>
> Yes, please.
>
> Note that I need to get this fix shortly, though, or I will just
> revert the problemating commit before the 6.2 merge window opens.

I sent it a few hours ago as "[PATCH] cpufreq: acpi: Only set boost MSRs on supported CPUs".
Thanks!