Re: [PATCH v4 8/9] clk: qcom: rpmh: Add support for SM8550 rpmh clocks

From: Abel Vesa
Date: Tue Dec 06 2022 - 05:52:30 EST


On 22-11-30 13:59:00, Dmitry Baryshkov wrote:
> On Wed, 30 Nov 2022 at 13:45, Dmitry Baryshkov
> <dmitry.baryshkov@xxxxxxxxxx> wrote:
> >
> > On Wed, 30 Nov 2022 at 13:30, Abel Vesa <abel.vesa@xxxxxxxxxx> wrote:
> > >
> > > Adds the RPMH clocks present in SM8550 SoC.
> > >
> > > Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> > > Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> > > ---
> > > drivers/clk/qcom/clk-rpmh.c | 110 +++++++++++++++++++++++++++++-------
> > > 1 file changed, 90 insertions(+), 20 deletions(-)
> > >
> > > diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
> > > index 0471bab82464..3204df3fda86 100644
> > > --- a/drivers/clk/qcom/clk-rpmh.c
> > > +++ b/drivers/clk/qcom/clk-rpmh.c
> > > @@ -132,6 +132,36 @@ static DEFINE_MUTEX(rpmh_clk_lock);
> > > }, \
> > > }
> > >
> > > +#define DEFINE_CLK_RPMH_FIXED(_platform, _name, _name_active, \
> > > + _parent_name, _name_active_parent, \
> > > + _div) \
> > > + static struct clk_fixed_factor _platform##_##_name = { \
> > > + .mult = 1, \
> > > + .div = _div, \
> > > + .hw.init = &(struct clk_init_data){ \
> > > + .ops = &clk_fixed_factor_ops, \
> > > + .name = #_name, \
> > > + .parent_data = &(const struct clk_parent_data){ \
> > > + .fw_name = #_parent_name, \
> > > + .name = #_parent_name, \
> > > + }, \
> > > + .num_parents = 1, \
> > > + }, \
> > > + }; \
> > > + static struct clk_fixed_factor _platform##_##_name_active = { \
> > > + .mult = 1, \
> > > + .div = _div, \
> > > + .hw.init = &(struct clk_init_data){ \
> > > + .ops = &clk_fixed_factor_ops, \
> > > + .name = #_name_active, \
> > > + .parent_data = &(const struct clk_parent_data){ \
> > > + .fw_name = #_name_active_parent,\
> > > + .name = #_name_active_parent, \
> > > + }, \
> > > + .num_parents = 1, \
> > > + }, \
> > > + }
> > > +
> >
> > Please use CLK_FIXED_FACTOR_FW_NAME() instead.
>
> Or even better CLK_FIXED_FACTOR_HW(). It fits better here.

I think DEFINE_CLK_FIXED_FACTOR would be even a better fit. No _HW since we
are not defining just the clk_hw. Also we should keep the DEFINE_ prefix to
be consistent with the others.

>
> >
> > > static inline struct clk_rpmh *to_clk_rpmh(struct clk_hw *_hw)
> > > {
> > > return container_of(_hw, struct clk_rpmh, hw);
> > > @@ -579,6 +609,43 @@ static const struct clk_rpmh_desc clk_rpmh_sm8450 = {
> > > .num_clks = ARRAY_SIZE(sm8450_rpmh_clocks),
> > > };
> > >
> > > +DEFINE_CLK_RPMH_ARC(sm8550, xo_pad, xo_pad_ao, "xo.lvl", 0x03, 2);
> > > +DEFINE_CLK_RPMH_FIXED(sm8550, bi_tcxo, bi_tcxo_ao, xo_pad, xo_pad_ao, 2);
> > > +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk1, rf_clk1_ao, "clka1", 1);
> > > +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk2, rf_clk2_ao, "clka2", 1);
> > > +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk3, rf_clk3_ao, "clka3", 1);
> > > +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk4, rf_clk4_ao, "clka4", 1);
> > > +DEFINE_CLK_RPMH_VRM(sm8550, ln_bb_clk1, ln_bb_clk1_ao, "clka6", 2);
> > > +DEFINE_CLK_RPMH_VRM(sm8550, ln_bb_clk2, ln_bb_clk2_ao, "clka7", 2);
> > > +DEFINE_CLK_RPMH_VRM(sm8550, ln_bb_clk3, ln_bb_clk3_ao, "clka8", 2);
> > > +
> > > +static struct clk_hw *sm8550_rpmh_clocks[] = {
> > > + [RPMH_CXO_PAD_CLK] = &sm8550_xo_pad.hw,
> > > + [RPMH_CXO_PAD_CLK_A] = &sm8550_xo_pad_ao.hw,
> > > + [RPMH_CXO_CLK] = &sm8550_bi_tcxo.hw,
> > > + [RPMH_CXO_CLK_A] = &sm8550_bi_tcxo_ao.hw,
> > > + [RPMH_LN_BB_CLK1] = &sm8550_ln_bb_clk1.hw,
> > > + [RPMH_LN_BB_CLK1_A] = &sm8550_ln_bb_clk1_ao.hw,
> > > + [RPMH_LN_BB_CLK2] = &sm8550_ln_bb_clk2.hw,
> > > + [RPMH_LN_BB_CLK2_A] = &sm8550_ln_bb_clk2_ao.hw,
> > > + [RPMH_LN_BB_CLK3] = &sm8550_ln_bb_clk3.hw,
> > > + [RPMH_LN_BB_CLK3_A] = &sm8550_ln_bb_clk3_ao.hw,
> > > + [RPMH_RF_CLK1] = &sm8550_rf_clk1.hw,
> > > + [RPMH_RF_CLK1_A] = &sm8550_rf_clk1_ao.hw,
> > > + [RPMH_RF_CLK2] = &sm8550_rf_clk2.hw,
> > > + [RPMH_RF_CLK2_A] = &sm8550_rf_clk2_ao.hw,
> > > + [RPMH_RF_CLK3] = &sm8550_rf_clk3.hw,
> > > + [RPMH_RF_CLK3_A] = &sm8550_rf_clk3_ao.hw,
> > > + [RPMH_RF_CLK4] = &sm8550_rf_clk4.hw,
> > > + [RPMH_RF_CLK4_A] = &sm8550_rf_clk4_ao.hw,
> > > + [RPMH_IPA_CLK] = &sdm845_ipa.hw,
> > > +};
> > > +
> > > +static const struct clk_rpmh_desc clk_rpmh_sm8550 = {
> > > + .clks = sm8550_rpmh_clocks,
> > > + .num_clks = ARRAY_SIZE(sm8550_rpmh_clocks),
> > > +};
> > > +
> > > static struct clk_hw *sc7280_rpmh_clocks[] = {
> > > [RPMH_CXO_CLK] = &sc7280_bi_tcxo.hw,
> > > [RPMH_CXO_CLK_A] = &sc7280_bi_tcxo_ao.hw,
> > > @@ -682,29 +749,31 @@ static int clk_rpmh_probe(struct platform_device *pdev)
> > >
> > > name = hw_clks[i]->init->name;
> > >
> > > - rpmh_clk = to_clk_rpmh(hw_clks[i]);
> > > - res_addr = cmd_db_read_addr(rpmh_clk->res_name);
> > > - if (!res_addr) {
> > > - dev_err(&pdev->dev, "missing RPMh resource address for %s\n",
> > > - rpmh_clk->res_name);
> > > - return -ENODEV;
> > > - }
> > > + if (hw_clks[i]->init->ops != &clk_fixed_factor_ops) {
> >
> > This looks ugly a bit. I'd rather add something like non_cmd_clks to
> > the clk_rpmh_desc data and register them separately. Or even worse,
> > you can keep the rpmh as is, with only cmd-db based clocks and add a
> > fixed factor clock to the sm8550 dtsi directly. I have a slight
> > preference for the former method, but the latter would also work.
>
> After a second thought, I'd withdraw the second method. Just add a
> separate array with non-cmd-db clocks.
>
> >
> > > + rpmh_clk = to_clk_rpmh(hw_clks[i]);
> > > + res_addr = cmd_db_read_addr(rpmh_clk->res_name);
> > > + if (!res_addr) {
> > > + dev_err(&pdev->dev, "missing RPMh resource address for %s\n",
> > > + rpmh_clk->res_name);
> > > + return -ENODEV;
> > > + }
> > >
> > > - data = cmd_db_read_aux_data(rpmh_clk->res_name, &aux_data_len);
> > > - if (IS_ERR(data)) {
> > > - ret = PTR_ERR(data);
> > > - dev_err(&pdev->dev,
> > > - "error reading RPMh aux data for %s (%d)\n",
> > > - rpmh_clk->res_name, ret);
> > > - return ret;
> > > - }
> > > + data = cmd_db_read_aux_data(rpmh_clk->res_name, &aux_data_len);
> > > + if (IS_ERR(data)) {
> > > + ret = PTR_ERR(data);
> > > + dev_err(&pdev->dev,
> > > + "error reading RPMh aux data for %s (%d)\n",
> > > + rpmh_clk->res_name, ret);
> > > + return ret;
> > > + }
> > >
> > > - /* Convert unit from Khz to Hz */
> > > - if (aux_data_len == sizeof(*data))
> > > - rpmh_clk->unit = le32_to_cpu(data->unit) * 1000ULL;
> > > + /* Convert unit from Khz to Hz */
> > > + if (aux_data_len == sizeof(*data))
> > > + rpmh_clk->unit = le32_to_cpu(data->unit) * 1000ULL;
> > >
> > > - rpmh_clk->res_addr += res_addr;
> > > - rpmh_clk->dev = &pdev->dev;
> > > + rpmh_clk->res_addr += res_addr;
> > > + rpmh_clk->dev = &pdev->dev;
> > > + }
> > >
> > > ret = devm_clk_hw_register(&pdev->dev, hw_clks[i]);
> > > if (ret) {
> > > @@ -739,6 +808,7 @@ static const struct of_device_id clk_rpmh_match_table[] = {
> > > { .compatible = "qcom,sm8250-rpmh-clk", .data = &clk_rpmh_sm8250},
> > > { .compatible = "qcom,sm8350-rpmh-clk", .data = &clk_rpmh_sm8350},
> > > { .compatible = "qcom,sm8450-rpmh-clk", .data = &clk_rpmh_sm8450},
> > > + { .compatible = "qcom,sm8550-rpmh-clk", .data = &clk_rpmh_sm8550},
> > > { .compatible = "qcom,sc7280-rpmh-clk", .data = &clk_rpmh_sc7280},
> > > { }
> > > };
> > > --
> > > 2.34.1
> > >
> >
> >
> > --
> > With best wishes
> > Dmitry
>
>
>
> --
> With best wishes
> Dmitry