Re: [PATCH v2] docs: Integrate rustdoc into Rust documentation
From: Carlos Bilbao
Date: Tue Dec 06 2022 - 10:02:30 EST
On 12/6/22 08:22, Akira Yokosawa wrote:
On Mon, 5 Dec 2022 10:36:11 -0600, Carlos Bilbao wrote:
On 12/4/22 19:06, Akira Yokosawa wrote:
Hi,
On Thu, 1 Dec 2022 14:48:14 -0600, Carlos Bilbao wrote:
Include HTML output generated with rustdoc into the Linux kernel
documentation on Rust. Change target `make htmldocs` to combine RST Sphinx
and the generation of Rust documentation, when support is available.
Signed-off-by: Carlos Bilbao <carlos.bilbao@xxxxxxx>
---
Changes since V1:
- Work on top of v6.1-rc1.
Thank you for the rebase.
- Don't use rustdoc.rst, instead add link to Documentation/rust/index.rst.
- In Documentation/Makefile, replace @make rustdoc for $(Q)$(MAKE) rustdoc.
- Don't do LLVM=1 for all rustdoc generation within `make htmldocs`.
- Add spaces on definition of RUSTDOC_OUTPUT, for consistency.
---
Documentation/Makefile | 4 ++++
Documentation/rust/index.rst | 3 +++
rust/Makefile | 15 +++++++++------
3 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/Documentation/Makefile b/Documentation/Makefile
index 64d44c1ecad3..f537cf558af6 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -92,6 +92,10 @@ quiet_cmd_sphinx = SPHINX $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
fi
htmldocs:
+# If Rust support is available, add rustdoc generated contents
+ifdef CONFIG_RUST
+ $(Q)$(MAKE) rustdoc
+endif
@$(srctree)/scripts/sphinx-pre-install --version-check
@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
So, this means "make htmldocs" will require kernel .config if CONFIG_RUST=y.
I'm not sure this new requirement is acceptable for kernel documentation
testers who just want to build kernel documentation.
This is already kind of the case for Rust-related business.
You are doing three things in this patch.
1) Change the destination of rustdoc to under Documentation/output/
2) Add a cross reference to the generated rustdoc in
Documentation/rust/index.rst.
3) Integrate rustdoc generation into htmldocs.
I'm OK with 1) and 2).
Can you separate 3) into another patch and respin?
Glad we can agree on 1) and 2). Why moving 3)? This is a small patch with
one overall purpose (Integrate rustdoc into website).
Yes, I agree that 3) is a small change. I understand what you want to
do. But there are a couple of options for _how_ to do it.
My current position is that Documentation/Makefile is _not_ the right
place for the change, as mentioned in my reply to Miguel.
By the way, is rustdoc's requirement of .config only for CONFIG_RUST?
In other words, are contents of rustdoc affected by other config settings?
If not, I think rustdoc can be generated regardless of config settings as
far as necessary tools (rustc, bindgen, etc.) are available.
Yes, but someone with the tools may not want to use them. Keep in mind that
generating rustdoc takes a few extra seconds.
As mentioned in another reply, I'm convinced of the dependency on .config.
diff --git a/Documentation/rust/index.rst b/Documentation/rust/index.rst
index 4ae8c66b94fa..4005326c3ba9 100644
--- a/Documentation/rust/index.rst
+++ b/Documentation/rust/index.rst
@@ -6,6 +6,9 @@ Rust
Documentation related to Rust within the kernel. To start using Rust
in the kernel, please read the quick-start.rst guide.
+If this documentation includes rustdoc-generated HTML, the entry point can
+be found `here. <rustdoc/kernel/index.html>`_
This cross reference will only make sense in htmldocs build.
Perhaps, you can use the "only::" directive [1] as follows:
.. only:: html
This I can gladly do on a V3. I will wait for an answer on issues above.
OK.
So if you split this into a two-patch series, 1/2 for 1) and 2), and 2/2
for 3) (or an updated one), I'm glad to give my RB tag to 1/2 for Miguel
to be able take it for v6.2 (timing is tight!). 2/2 will need at least
a couple of respins, I guess.
Sounds good, I will divide for v3.
Thanks, Akira
If this documentation includes rustdoc-generated HTML, the entry point can
be found `here. <rustdoc/kernel/index.html>`_
[1]: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.sphinx-doc.org%2Fen%2Fmaster%2Fusage%2Frestructuredtext%2Fdirectives.html%23directive-only&data=05%7C01%7Ccarlos.bilbao%40amd.com%7Cbed091b8fae74b3d314408dad7954fc2%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C638059333550278394%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=xGbmhYsge%2BoPo%2BRrsc6fCW8htY3yh0dHk4E8gQBQV9o%3D&reserved=0
Thanks, Akira
+
.. toctree::
:maxdepth: 1
diff --git a/rust/Makefile b/rust/Makefile
index 7700d3853404..080c07048065 100644
--- a/rust/Makefile
+++ b/rust/Makefile
@@ -1,5 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
+# Where to place rustdoc generated documentation
+RUSTDOC_OUTPUT = $(objtree)/Documentation/output/rust/rustdoc
+
always-$(CONFIG_RUST) += target.json
no-clean-files += target.json
@@ -58,7 +61,7 @@ quiet_cmd_rustdoc = RUSTDOC $(if $(rustdoc_host),H, ) $<
OBJTREE=$(abspath $(objtree)) \
$(RUSTDOC) $(if $(rustdoc_host),$(rust_common_flags),$(rust_flags)) \
$(rustc_target_flags) -L$(objtree)/$(obj) \
- --output $(objtree)/$(obj)/doc \
+ --output $(RUSTDOC_OUTPUT) \
--crate-name $(subst rustdoc-,,$@) \
@$(objtree)/include/generated/rustc_cfg $<
@@ -75,15 +78,15 @@ quiet_cmd_rustdoc = RUSTDOC $(if $(rustdoc_host),H, ) $<
# and then retouch the generated files.
rustdoc: rustdoc-core rustdoc-macros rustdoc-compiler_builtins \
rustdoc-alloc rustdoc-kernel
- $(Q)cp $(srctree)/Documentation/images/logo.svg $(objtree)/$(obj)/doc
- $(Q)cp $(srctree)/Documentation/images/COPYING-logo $(objtree)/$(obj)/doc
- $(Q)find $(objtree)/$(obj)/doc -name '*.html' -type f -print0 | xargs -0 sed -Ei \
+ $(Q)cp $(srctree)/Documentation/images/logo.svg $(RUSTDOC_OUTPUT)
+ $(Q)cp $(srctree)/Documentation/images/COPYING-logo $(RUSTDOC_OUTPUT)
+ $(Q)find $(RUSTDOC_OUTPUT) -name '*.html' -type f -print0 | xargs -0 sed -Ei \
-e 's:rust-logo\.svg:logo.svg:g' \
-e 's:rust-logo\.png:logo.svg:g' \
-e 's:favicon\.svg:logo.svg:g' \
-e 's:<link rel="alternate icon" type="image/png" href="[./]*favicon-(16x16|32x32)\.png">::g'
$(Q)echo '.logo-container > img { object-fit: contain; }' \
- >> $(objtree)/$(obj)/doc/rustdoc.css
+ >> $(RUSTDOC_OUTPUT)/rustdoc.css
rustdoc-macros: private rustdoc_host = yes
rustdoc-macros: private rustc_target_flags = --crate-type proc-macro \
@@ -141,7 +144,7 @@ quiet_cmd_rustdoc_test = RUSTDOC T $<
@$(objtree)/include/generated/rustc_cfg \
$(rustc_target_flags) $(rustdoc_test_target_flags) \
--sysroot $(objtree)/$(obj)/test/sysroot $(rustdoc_test_quiet) \
- -L$(objtree)/$(obj)/test --output $(objtree)/$(obj)/doc \
+ -L$(objtree)/$(obj)/test --output $(RUSTDOC_OUTPUT) \
--crate-name $(subst rusttest-,,$@) $<
# We cannot use `-Zpanic-abort-tests` because some tests are dynamic,
base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780
Thanks,
Carlos