[PATCH 2/2] Documentation: Add Function Redirection API docs

[David Gow]

From: Sadiya Kazi <sadiyakazi@xxxxxxxxxx>

Added a new page (functionredirection.rst) that describes the Function
Redirection (static stubbing) API. This page will be expanded if we add,
for example, ftrace-based stubbing.

In addition,
1. Updated the api/index.rst page to create an entry for function
   redirection api
2. Updated the toctree to be hidden, reducing redundancy on the
   generated page.

Signed-off-by: Sadiya Kazi <sadiyakazi@xxxxxxxxxx>
Co-developed-by: David Gow <davidgow@xxxxxxxxxx>
Signed-off-by: David Gow <davidgow@xxxxxxxxxx>
---

Note that this patch is new to v1 of the series, and wasn't included in
the previous RFCs.

---
 .../kunit/api/functionredirection.rst         | 162 ++++++++++++++++++
 Documentation/dev-tools/kunit/api/index.rst   |  13 +-
 2 files changed, 172 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/dev-tools/kunit/api/functionredirection.rst

diff --git a/Documentation/dev-tools/kunit/api/functionredirection.rst b/Documentation/dev-tools/kunit/api/functionredirection.rst
new file mode 100644
index 000000000000..fc7644dfea65
--- /dev/null
+++ b/Documentation/dev-tools/kunit/api/functionredirection.rst
@@ -0,0 +1,162 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Function Redirection API
+========================
+
+Overview
+========
+
+When writing unit tests, it's important to be able to isolate the code being
+tested from other parts of the kernel. This ensures the reliability of the test
+(it won't be affected by external factors), reduces dependencies on specific
+hardware or config options (making the test easier to run), and protects the
+stability of the rest of the system (making it less likely for test-specific
+state to interfere with the rest of the system).
+
+While for some code (typically generic data structures, helpers, and toher
+"pure function") this is trivial, for others (like device drivers, filesystems,
+core subsystems) the code is heavily coupled with other parts of the kernel.
+
+This often involves global state in some way: be it global lists of devices,
+the filesystem, or hardware state, this needs to be either carefully managed,
+isolated, and restored, or avoided altogether by replacing access to and
+mutation of this state with a "fake" or "mock" variant.
+
+This can be done by refactoring the code to abstract out access to such state,
+by introducing a layer of indirection which can use or emulate a separate set of
+test state. However, such refactoring comes with its own costs (and undertaking
+significant refactoring before being able to write tests is suboptimal).
+
+A simpler way to intercept some of the function calls is to use function
+redirection via static stubs.
+
+
+Static Stubs
+============
+
+Static stubs are a way of redirecting calls to one function (the "real"
+function) to another function (the "replacement" function).
+
+It works by adding a macro to the "real" function which checks to see if a test
+is running, and if a replacement function is available. If so, that function is
+called in place of the original.
+
+Using static stubs is pretty straightforward:
+
+1. Add the KUNIT_STATIC_STUB_REDIRECT() macro to the start of the "real"
+   function.
+
+   This should be the first statement in the function, after any variable
+   declarations. KUNIT_STATIC_STUB_REDIRECT() takes the name of the
+   function, followed by all of the arguments passed to the real function.
+
+   For example:
+
+   .. code-block:: c
+
+	void send_data_to_hardware(const char *str)
+	{
+		KUNIT_STATIC_STUB_REDIRECT(send_data_to_hardware, str);
+		/* real implementation */
+	}
+
+2. Write one or more replacement functions.
+
+   These functions should have the same function signature as the real function.
+   In the event they need to access or modify test-specific state, they can use
+   kunit_get_current_test() to get a struct kunit pointer. This can then
+   be passed to the expectation/assertion macros, or used to look up KUnit
+   resources.
+
+   For example:
+
+   .. code-block:: c
+
+	void fake_send_data_to_hardware(const char *str)
+	{
+		struct kunit *test = kunit_get_current_test();
+		KUNIT_EXPECT_STREQ(test, str, "Hello World!");
+	}
+
+3. Activate the static stub from your test.
+
+   From within a test, the redirection can be enabled with
+   kunit_activate_static_stub(), which accepts a struct kunit pointer,
+   the real function, and the replacement function. You can call this several
+   times with different replacement functions to swap out implementations of the
+   function.
+
+   In our example, this would be
+
+   .. code-block:: c
+
+        kunit_activate_static_stub(test,
+                                   send_data_to_hardware,
+                                   fake_send_data_to_hardware);
+
+4. Call (perhaps indirectly) the real function.
+
+   Once the redirection is activated, any call to the real function will call
+   the replacement function instead. Such calls may be buried deep in the
+   implementation of another function, but must occur from the test's kthread.
+
+   For example:
+
+   .. code-block:: c
+
+        send_data_to_hardware("Hello World!"); /* Succeeds */
+        send_data_to_hardware("Something else"); /* Fails the test. */
+
+5. (Optionally) disable the stub.
+
+   When you no longer need it, the redirection can be disabled (and hence the
+   original behaviour of the 'real' function resumed) using
+   kunit_deactivate_static_stub(). If the stub is not manually deactivated, it
+   will nevertheless be disabled when the test finishes.
+
+   For example:
+
+   .. code-block:: c
+
+        kunit_deactivate_static_stub(test, send_data_to_hardware);
+
+
+It's also possible to use these replacement functions to test to see if a
+function is called at all, for example:
+
+.. code-block:: c
+
+	void send_data_to_hardware(const char *str)
+	{
+		KUNIT_STATIC_STUB_REDIRECT(send_data_to_hardware, str);
+		/* real implementation */
+	}
+
+	/* In test file */
+	int times_called = 0;
+	void fake_send_data_to_hardware(const char *str)
+	{
+		/* fake implementation */
+		times_called++;
+	}
+	...
+	/* In the test case, redirect calls for the duration of the test */
+	kunit_activate_static_stub(test, send_data_to_hardware, fake_send_data_to_hardware);
+
+	send_data_to_hardware("hello");
+	KUNIT_EXPECT_EQ(test, times_called, 1);
+
+	/* Can also deactivate the stub early, if wanted */
+	kunit_deactivate_static_stub(test, send_data_to_hardware);
+
+	send_data_to_hardware("hello again");
+	KUNIT_EXPECT_EQ(test, times_called, 1);
+
+
+
+API Reference
+=============
+
+.. kernel-doc:: include/kunit/static_stub.h
+   :internal:
diff --git a/Documentation/dev-tools/kunit/api/index.rst b/Documentation/dev-tools/kunit/api/index.rst
index 45ce04823f9f..2d8f756aab56 100644
--- a/Documentation/dev-tools/kunit/api/index.rst
+++ b/Documentation/dev-tools/kunit/api/index.rst
@@ -4,17 +4,24 @@
 API Reference
 =============
 .. toctree::
+	:hidden:
 
 	test
 	resource
+	functionredirection
 
-This section documents the KUnit kernel testing API. It is divided into the
+
+This page documents the KUnit kernel testing API. It is divided into the
 following sections:
 
 Documentation/dev-tools/kunit/api/test.rst
 
- - documents all of the standard testing API
+ - Documents all of the standard testing API
 
 Documentation/dev-tools/kunit/api/resource.rst
 
- - documents the KUnit resource API
+ - Documents the KUnit resource API
+
+Documentation/dev-tools/kunit/api/functionredirection.rst
+
+ - Documents the KUnit Function Redirection API
-- 
2.39.0.rc0.267.gcb52ba06e7-goog