Re: [PATCH v2 2/2] cpufreq: schedutil: Optimize operations with single max CPU capacity

From: Lukasz Luba
Date: Thu Dec 08 2022 - 06:01:39 EST



On 12/8/22 10:31, Vincent Guittot wrote:
On Thu, 8 Dec 2022 at 11:06, Lukasz Luba <lukasz.luba@xxxxxxx> wrote:



On 12/8/22 08:37, Vincent Guittot wrote:
On Wed, 7 Dec 2022 at 11:17, Lukasz Luba <lukasz.luba@xxxxxxx> wrote:

The max CPU capacity is the same for all CPUs sharing frequency domain
and thus 'policy' object. There is a way to avoid heavy operations
in a loop for each CPU by leveraging this knowledge. Thus, simplify
the looping code in the sugov_next_freq_shared() and drop heavy
multiplications. Instead, use simple max() to get the highest utilization
from these CPUs. This is useful for platforms with many (4 or 6) little
CPUs.

The max CPU capacity must be fetched every time we are called, due to
difficulties during the policy setup, where we are not able to get the
normalized CPU capacity at the right time.

The stored value in sugov_policy::max is also than used in
sugov_iowait_apply() to calculate the right boost. Thus, that field is
useful to have in that sugov_policy struct.

Signed-off-by: Lukasz Luba <lukasz.luba@xxxxxxx>
---
kernel/sched/cpufreq_schedutil.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index c19d6de67b7a..f9881f3d9488 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -158,10 +158,8 @@ static unsigned int get_next_freq(struct sugov_policy *sg_policy,

static void sugov_get_util(struct sugov_cpu *sg_cpu)
{
- struct sugov_policy *sg_policy = sg_cpu->sg_policy;
struct rq *rq = cpu_rq(sg_cpu->cpu);

- sg_policy->max = arch_scale_cpu_capacity(sg_cpu->cpu);
sg_cpu->bw_dl = cpu_bw_dl(rq);
sg_cpu->util = effective_cpu_util(sg_cpu->cpu, cpu_util_cfs(sg_cpu->cpu),
FREQUENCY_UTIL, NULL);
@@ -317,6 +315,8 @@ static inline void ignore_dl_rate_limit(struct sugov_cpu *sg_cpu)
static inline bool sugov_update_single_common(struct sugov_cpu *sg_cpu,
u64 time, unsigned int flags)
{
+ struct sugov_policy *sg_policy = sg_cpu->sg_policy;
+
sugov_iowait_boost(sg_cpu, time, flags);
sg_cpu->last_update = time;

@@ -325,6 +325,9 @@ static inline bool sugov_update_single_common(struct sugov_cpu *sg_cpu,
if (!sugov_should_update_freq(sg_cpu->sg_policy, time))
return false;

+ /* Fetch the latest CPU capcity to avoid stale data */
+ sg_policy->max = arch_scale_cpu_capacity(sg_cpu->cpu);
+
sugov_get_util(sg_cpu);
sugov_iowait_apply(sg_cpu, time);

@@ -414,25 +417,22 @@ static unsigned int sugov_next_freq_shared(struct sugov_cpu *sg_cpu, u64 time)
{
struct sugov_policy *sg_policy = sg_cpu->sg_policy;
struct cpufreq_policy *policy = sg_policy->policy;
- unsigned long util = 0, max = 1;
+ unsigned long util = 0;
unsigned int j;

+ /* Fetch the latest CPU capcity to avoid stale data */
+ sg_policy->max = arch_scale_cpu_capacity(sg_cpu->cpu);
+
for_each_cpu(j, policy->cpus) {
struct sugov_cpu *j_sg_cpu = &per_cpu(sugov_cpu, j);
- unsigned long j_util, j_max;

sugov_get_util(j_sg_cpu);
sugov_iowait_apply(j_sg_cpu, time);
- j_util = j_sg_cpu->util;
- j_max = j_sg_cpu->max;

- if (j_util * max > j_max * util) {
- util = j_util;
- max = j_max;
- }

With the code removed above, max is only used in 2 places:
- sugov_iowait_apply
- map_util_freq

I wonder if it would be better to just call arch_scale_cpu_capacity()
in these 2 places instead of saving a copy in sg_policy and then
reading it twice.

The sugov_iowait_apply() is called in that loop, so probably I will
add a new argument to that call and just feed it with the capacity value
from one CPU, which was read before the loop. So, similarly what is in
this patch. Otherwise, all of those per-cpu capacity vars would be
accessed inside the sugov_iowait_apply() with sg_cpu->cpu.

Yes make sense



arch_scaleu_cpu_capacity is already a per_cpu variable so accessing it
should be pretty cheap.

Yes and no, as you said this is per-cpu variable and would access them
from one CPU, which is running that loop. They will have different pages
and addresses so cache lines on that CPU. to avoiding trashing a cache
lines on this running CPU let's read that capacity once, before the
loop. Let's use the new arg to pass that value via one of the
registers. In such, only one cache line would have to fetch that data
into.

So I thought this simple sg_policy->max would do the trick w/o a lot
of hassle.

For the shared mode, everything is located in sugov_next_freq_shared
so you don't need to save the max value with your proposal above to
change sugov_iowait_apply interface.

This should be doable as well for single mode


Thought ?


I can change that and drop the sg_policy->max and call differently
those capacity values. I will have to unfortunately drop Viresh's ACKs,
since this will be a way different code.

Thanks Vincent for the suggestion. Do you want me to go further with
such approach and send a v3?

Don't know what Rafael and Viresh think but it seems that we don't
need to save the return of arch_scale_cpu_capacity in ->max field but
directly use it

Yes I agree, we don't need to, but I will have to modify a few function
calls and args.

So IMO we have agreed. I won't call the call arch_scale_cpu_capacity()
in these 2 places, but I will make it with the local var and data
fetched as little as possible.