[PATCH v4 0/7] Add minimal MT8365 and MT8365-EVK support

[Bernhard Rosenkränzer]

This adds minimal support for the MediaTek 8365 SOC and the EVK reference
board, allowing the board to boot to initramfs with serial port I/O.

v4:
  - Remove pins-are-numbered references that have been holding things up
    now that the patches removing it from dt-bindings have landed in linux-next

v3:
  - Remove a number of components that are not yet supported (they will
    come back alongside the corresponding drivers)
  - Address issues found by dt_binding_check (mostly fixing pinctrl
    bindings)
  - Address issues pointed out in comments
  - Reorder patches

v2:
  - Add missing dt-bindings documentation
  - Small cleanups addressing issues in v1 pointed out by Krzysztof Kozlowski



Bernhard Rosenkränzer (4):
  dt-bindings: arm64: dts: mediatek: Add mt8365-evk board
  dt-bindings: irq: mtk, sysirq: add support for mt8365
  dt-bindings: mfd: syscon: Add mt8365-syscfg
  dt-bindings: pinctrl: add bindings for Mediatek MT8365 SoC

Fabien Parent (3):
  dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
  dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
  arm64: dts: mediatek: Initial mt8365-evk support

 .../devicetree/bindings/arm/mediatek.yaml     |   4 +
 .../interrupt-controller/mediatek,sysirq.txt  |   1 +
 .../devicetree/bindings/mfd/syscon.yaml       |   1 +
 .../pinctrl/mediatek,mt8365-pinctrl.yaml      | 197 ++++++++++
 .../bindings/usb/mediatek,mtk-xhci.yaml       |   1 +
 .../bindings/usb/mediatek,mtu3.yaml           |   1 +
 arch/arm64/boot/dts/mediatek/Makefile         |   1 +
 arch/arm64/boot/dts/mediatek/mt8365-evk.dts   | 163 +++++++++
 arch/arm64/boot/dts/mediatek/mt8365.dtsi      | 343 ++++++++++++++++++
 9 files changed, 712 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi

-- 
2.38.1