Re: [PATCH v5 10/12] arm64: dts: qcom: sc8280xp: Define some of the display blocks

[Johan Hovold]

On Wed, Dec 07, 2022 at 02:00:10PM -0800, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> 
> Define the display clock controllers, the MDSS instances, the DP phys
> and connect these together.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
> 
> Changes since v4:
> - None
> 
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 +++++++++++++++++++++++++
>  1 file changed, 838 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 9f3132ac2857..c2f186495506 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
 
> +		mdss0: display-subsystem@ae00000 {
> +			compatible = "qcom,sc8280xp-mdss";
> +			reg = <0 0x0ae00000 0 0x1000>;
> +			reg-names = "mdss";
> +
> +			power-domains = <&dispcc0 MDSS_GDSC>;
> +
> +			clocks = <&gcc GCC_DISP_AHB_CLK>,
> +				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> +				 <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
> +			clock-names = "iface",
> +				      "ahb",
> +				      "core";
> +
> +			resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
> +
> +			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +
> +			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> +					<&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> +			interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> +			iommus = <&apps_smmu 0x1000 0x402>;
> +
> +			status = "disabled";

Please move status last.

> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			mdss0_mdp: display-controller@ae01000 {

[...]

> +		mdss1: display-subsystem@22000000 {
> +			compatible = "qcom,sc8280xp-mdss";
> +			reg = <0 0x22000000 0 0x1000>;
> +			reg-names = "mdss";
> +
> +			power-domains = <&dispcc1 MDSS_GDSC>;
> +
> +			clocks = <&gcc GCC_DISP_AHB_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_MDP_CLK>;
> +			clock-names = "iface",
> +				      "ahb",
> +				      "core";
> +
> +			resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>;
> +
> +			interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +
> +			interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>,
> +					<&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>;
> +			interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> +			iommus = <&apps_smmu 0x1800 0x402>;
> +
> +			status = "disabled";

Same here.

> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			mdss1_mdp: display-controller@22001000 {

Johan