Re: [PATCH] dt-bindings: mmc: Convert Fujitsu SDHCI to DT schema

[Ard Biesheuvel]

cc Jassi and Masahisa

On Fri, 9 Dec 2022 at 19:42, Rob Herring <robh@xxxxxxxxxx> wrote:
>
> On Fri, Dec 9, 2022 at 11:16 AM Rob Herring <robh@xxxxxxxxxx> wrote:
> >
> > Convert the Fujitsu SDHCI binding to DT schema format.
> >
> > The interrupts were not documented. The driver only uses the first
> > interrupt, but the DT and example have 2 interrupts. The 2nd one is
> > unknown. "dma-coherent" was also not documented, but is used.
> >
> > The "socionext,synquacer-sdhci" compatible was not documented, but it is
> > compatible with "fujitsu,mb86s70-sdhci-3.0.yaml" and is in use (in
> > u-boot Synquacer dts).
> >
> > Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> > ---
> >  .../mmc/fujitsu,mb86s70-sdhci-3.0.yaml        | 67 +++++++++++++++++++
> >  .../devicetree/bindings/mmc/sdhci-fujitsu.txt | 32 ---------
> >  2 files changed, 67 insertions(+), 32 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/mmc/fujitsu,mb86s70-sdhci-3.0.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/fujitsu,mb86s70-sdhci-3.0.yaml b/Documentation/devicetree/bindings/mmc/fujitsu,mb86s70-sdhci-3.0.yaml
> > new file mode 100644
> > index 000000000000..0218a6ce4b2f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mmc/fujitsu,mb86s70-sdhci-3.0.yaml
> > @@ -0,0 +1,67 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mmc/fujitsu,mb86s70-sdhci-3.0.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Fujitsu SDHCI controller
> > +
> > +maintainers:
> > +  - Vincent Yang <Vincent.Yang@xxxxxxxxxxxxxx>
>
> Bounces. Any other volunteers?
>
> > +
> > +allOf:
> > +  - $ref: mmc-controller.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - items:
> > +          - const: socionext,synquacer-sdhci
> > +          - const: fujitsu,mb86s70-sdhci-3.0
> > +      - const: fujitsu,mb86s70-sdhci-3.0
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: Core clock
> > +      - description: Interface clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: core
> > +      - const: iface
> > +
> > +  dma-coherent: true
> > +
> > +  interrupts:
> > +    maxItems: 2
> > +
> > +  fujitsu,cmd-dat-delay-select:
> > +    type: boolean
> > +    description: Indicating that the host requires the CMD_DAT_DELAY control
> > +      to be enabled.
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-names
> > +  - interrupts
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    mmc@36600000 {
> > +        compatible = "fujitsu,mb86s70-sdhci-3.0";
> > +        reg = <0x36600000 0x1000>;
> > +        interrupts = <0 172 0x4>,
> > +               <0 173 0x4>;
> > +        bus-width = <4>;
> > +        vqmmc-supply = <&vccq_sdhci1>;
> > +        clocks = <&clock 2 2 0>, <&clock 2 3 0>;
> > +        clock-names = "core", "iface";
> > +    };
> > +...
> > diff --git a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
> > deleted file mode 100644
> > index 3ee9263adf73..000000000000
> > --- a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
> > +++ /dev/null
> > @@ -1,32 +0,0 @@
> > -* Fujitsu SDHCI controller
> > -
> > -This file documents differences between the core properties in mmc.txt
> > -and the properties used by the sdhci_f_sdh30 driver.
> > -
> > -Required properties:
> > -- compatible: "fujitsu,mb86s70-sdhci-3.0"
> > -- clocks: Must contain an entry for each entry in clock-names. It is a
> > -  list of phandles and clock-specifier pairs.
> > -  See ../clocks/clock-bindings.txt for details.
> > -- clock-names: Should contain the following two entries:
> > -       "iface" - clock used for sdhci interface
> > -       "core"  - core clock for sdhci controller
> > -
> > -Optional properties:
> > -- vqmmc-supply: phandle to the regulator device tree node, mentioned
> > -  as the VCCQ/VDD_IO supply in the eMMC/SD specs.
> > -- fujitsu,cmd-dat-delay-select: boolean property indicating that this host
> > -  requires the CMD_DAT_DELAY control to be enabled.
> > -
> > -Example:
> > -
> > -       sdhci1: mmc@36600000 {
> > -               compatible = "fujitsu,mb86s70-sdhci-3.0";
> > -               reg = <0 0x36600000 0x1000>;
> > -               interrupts = <0 172 0x4>,
> > -                            <0 173 0x4>;
> > -               bus-width = <4>;
> > -               vqmmc-supply = <&vccq_sdhci1>;
> > -               clocks = <&clock 2 2 0>, <&clock 2 3 0>;
> > -               clock-names = "iface", "core";
> > -       };
> > --
> > 2.35.1
> >