Re: [RFC PATCH] arm64: dts: qcom: Use plural _gpios node label for PMIC gpios

From: Konrad Dybcio
Date: Sat Dec 10 2022 - 09:25:31 EST




On 10.12.2022 11:50, Krzysztof Kozlowski wrote:
> On 09/12/2022 23:04, Marijn Suijten wrote:
>> The gpio node in PMIC dts'es define access to multiple GPIOs. Most Qcom
>> PMICs were already using the plural _gpios label to point to this node,
>> but a few PMICs were left behind including the recently-pulled
>> pm(i)8950.
>>
>> Rename it from *_gpio to *_gpios for pm6125, pm6150(l), pm8005,
>> pm(i)8950, and pm(i)8998.
>>
>> Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
>>
>> ---
>>
>> This was brought up for discussion in [1] but hasn't seen any relevant
>> reply, unfortunately.
>
> This is just a label, it does not matter. Why changing all exisitng
> files? I don't think it was a part of previous discussions...
>
> To me it is unneeded churn.
IMHO it's beneficial, as when working on different platforms I have to
waste time checking or being told by the compiler that &pm8xxx_gpios
doesn't exist and then I have to think why and realize it's just not
named consistently..

Konrad
>
>>
>> [1]: https://lore.kernel.org/linux-arm-msm/20221104234435.xwjpwfxs73puvfca@xxxxxxxxxxxxxx/
>> ---
>> arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 8 ++++----
>> .../dts/qcom/msm8998-oneplus-cheeseburger.dts | 4 ++--
>> .../boot/dts/qcom/msm8998-oneplus-common.dtsi | 6 +++---
>> .../qcom/msm8998-sony-xperia-yoshino-maple.dts | 4 ++--
>> .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 16 ++++++++--------
>> .../arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts | 4 ++--
>> arch/arm64/boot/dts/qcom/pm6125.dtsi | 4 ++--
>> arch/arm64/boot/dts/qcom/pm6150.dtsi | 4 ++--
>> arch/arm64/boot/dts/qcom/pm6150l.dtsi | 4 ++--
>> arch/arm64/boot/dts/qcom/pm8005.dtsi | 4 ++--
>> arch/arm64/boot/dts/qcom/pm8950.dtsi | 4 ++--
>> arch/arm64/boot/dts/qcom/pm8998.dtsi | 4 ++--
>> arch/arm64/boot/dts/qcom/pmi8950.dtsi | 4 ++--
>> arch/arm64/boot/dts/qcom/pmi8998.dtsi | 4 ++--
>> arch/arm64/boot/dts/qcom/sc7180-idp.dts | 4 ++--
>> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 4 ++--
>> arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 4 ++--
>> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 16 ++++++++--------
>> arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 4 ++--
>> .../boot/dts/qcom/sdm845-oneplus-common.dtsi | 6 +++---
>> .../arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 4 ++--
>> .../boot/dts/qcom/sdm845-sony-xperia-tama.dtsi | 2 +-
>> .../dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 4 ++--
>> .../boot/dts/qcom/sdm845-xiaomi-polaris.dts | 4 ++--
>> .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 2 +-
>> 25 files changed, 64 insertions(+), 64 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
>> index 310f7a2df1e8..0e273938b59d 100644
>> --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
>> +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
>> @@ -113,7 +113,7 @@ gpio-keys {
>> <&cam_snapshot_pin_a>;
>> button-vol-up {
>> label = "Volume Up";
>> - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
>> + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
>> linux,input-type = <EV_KEY>;
>> linux,code = <KEY_VOLUMEUP>;
>
> Best regards,
> Krzysztof
>