[PATCH v2 06/15] spi: dw: Introduce dual/quad/octal spi

[Sudip Mukherjee]

If the spi transfer is using dual/quad/octal spi mode, then we need to
update the SPI_CTRLR0 register. The SPI_CTRLR0 register will be updated
in dw_spi_update_config() via the values in dw_spi_cfg.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@xxxxxxxxxx>
---

Note: DW_SPI_SPI_CTRLR0_INST_L_INST_L16 will not work yet as
spi_mem_default_supports_op() checks for op->cmd.nbytes != 1.

 drivers/spi/spi-dw-core.c | 46 +++++++++++++++++++++++++++++++++++++++
 drivers/spi/spi-dw.h      |  9 ++++++++
 2 files changed, 55 insertions(+)

diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index 89438ae2df17d..06169aa3f37bf 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -836,10 +836,56 @@ static int dw_spi_exec_enh_mem_op(struct spi_mem *mem, const struct spi_mem_op *
 {
 	struct spi_controller *ctlr = mem->spi->controller;
 	struct dw_spi *dws = spi_controller_get_devdata(ctlr);
+	struct dw_spi_cfg cfg;
+
+	switch (op->data.buswidth) {
+	case 2:
+		cfg.spi_frf = DW_SPI_CTRLR0_SPI_FRF_DUAL_SPI;
+		break;
+	case 4:
+		cfg.spi_frf = DW_SPI_CTRLR0_SPI_FRF_QUAD_SPI;
+		break;
+	case 8:
+		cfg.spi_frf = DW_SPI_CTRLR0_SPI_FRF_OCT_SPI;
+		break;
+	default:
+		return dw_spi_exec_mem_op(mem, op);
+	}
 
 	/* Collect cmd and addr into a single buffer */
 	dw_spi_init_enh_mem_buf(dws, op);
 
+	cfg.dfs = 8;
+	cfg.freq = clamp(mem->spi->max_speed_hz, 0U, dws->max_mem_freq);
+	cfg.ndf = op->data.nbytes;
+	if (op->data.dir == SPI_MEM_DATA_IN)
+		cfg.tmode = DW_SPI_CTRLR0_TMOD_RO;
+	else
+		cfg.tmode = DW_SPI_CTRLR0_TMOD_TO;
+	if (op->data.buswidth == op->addr.buswidth &&
+	    op->data.buswidth == op->cmd.buswidth)
+		cfg.trans_t = DW_SPI_SPI_CTRLR0_TRANS_TYPE_TT2;
+	else if (op->data.buswidth == op->addr.buswidth)
+		cfg.trans_t = DW_SPI_SPI_CTRLR0_TRANS_TYPE_TT1;
+	else
+		cfg.trans_t = DW_SPI_SPI_CTRLR0_TRANS_TYPE_TT0;
+
+	cfg.addr_l = clamp(op->addr.nbytes * 2, 0, 0xf);
+	if (op->cmd.nbytes > 1)
+		cfg.inst_l = DW_SPI_SPI_CTRLR0_INST_L_INST_L16;
+	else if (op->cmd.nbytes == 1)
+		cfg.inst_l = DW_SPI_SPI_CTRLR0_INST_L_INST_L8;
+	else
+		cfg.inst_l = DW_SPI_SPI_CTRLR0_INST_L_INST_L0;
+
+	cfg.wait_c = (op->dummy.nbytes * (BITS_PER_BYTE / op->dummy.buswidth));
+
+	dw_spi_enable_chip(dws, 0);
+
+	dw_spi_update_config(dws, mem->spi, &cfg);
+
+	dw_spi_enable_chip(dws, 1);
+
 	return 0;
 }
 
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 327d037bdb10e..494b830ad1026 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -101,6 +101,9 @@
 #define DW_HSSI_CTRLR0_SPI_FRF_MASK		GENMASK(23, 22)
 #define DW_PSSI_CTRLR0_SPI_FRF_MASK		GENMASK(22, 21)
 #define DW_SPI_CTRLR0_SPI_FRF_STD_SPI		0x0
+#define DW_SPI_CTRLR0_SPI_FRF_DUAL_SPI		0x1
+#define DW_SPI_CTRLR0_SPI_FRF_QUAD_SPI		0x2
+#define DW_SPI_CTRLR0_SPI_FRF_OCT_SPI		0x3
 
 /* Bit fields in CTRLR1 */
 #define DW_SPI_NDF_MASK				GENMASK(15, 0)
@@ -132,7 +135,13 @@
 #define DW_SPI_SPI_CTRLR0_CLK_STRETCH_EN	BIT(30)
 #define DW_SPI_SPI_CTRLR0_WAIT_CYCLE_MASK	GENMASK(15, 11)
 #define DW_SPI_SPI_CTRLR0_INST_L_MASK		GENMASK(9, 8)
+#define DW_SPI_SPI_CTRLR0_INST_L_INST_L0	0x0
+#define DW_SPI_SPI_CTRLR0_INST_L_INST_L8	0x2
+#define DW_SPI_SPI_CTRLR0_INST_L_INST_L16	0x3
 #define DW_SPI_SPI_CTRLR0_ADDR_L_MASK		GENMASK(5, 2)
+#define DW_SPI_SPI_CTRLR0_TRANS_TYPE_TT0	0x0
+#define DW_SPI_SPI_CTRLR0_TRANS_TYPE_TT1	0x1
+#define DW_SPI_SPI_CTRLR0_TRANS_TYPE_TT2	0x2
 
 /* Mem/DMA operations helpers */
 #define DW_SPI_WAIT_RETRIES			5
-- 
2.30.2