Re: [PATCH 1/3] arm64: dts: qcom: sm6115: Cleanup USB node names

[Konrad Dybcio]

On 13.12.2022 13:38, Bhupesh Sharma wrote:
> There is only one USB controller present on SM6115 / SM4250
> Qualcomm SoC, so drop the numbering used with USB nodes
> in the dtsi and the related sm4250-oneplus-billie2.dts.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts | 4 ++--
>  arch/arm64/boot/dts/qcom/sm6115.dtsi                | 8 ++++----
>  2 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> index a3f1c7c41fd73..fa57f4bf58256 100644
> --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> @@ -225,11 +225,11 @@ &ufs_mem_phy {
>  	status = "okay";
>  };
>  
> -&usb_1 {
> +&usb {
>  	status = "okay";
>  };
>  
> -&usb_1_hsphy {
> +&usb_hsphy {
>  	vdd-supply = <&vreg_l4a>;
>  	vdda-pll-supply = <&vreg_l12a>;
>  	vdda-phy-dpdm-supply = <&vreg_l15a>;
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 572bf04adf906..b5f7480c2e713 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -565,7 +565,7 @@ gcc: clock-controller@1400000 {
>  			#power-domain-cells = <1>;
>  		};
>  
> -		usb_1_hsphy: phy@1613000 {
> +		usb_hsphy: phy@1613000 {
>  			compatible = "qcom,sm6115-qusb2-phy";
>  			reg = <0x01613000 0x180>;
>  			#phy-cells = <0>;
> @@ -991,7 +991,7 @@ spi5: spi@4a94000 {
>  			};
>  		};
>  
> -		usb_1: usb@4ef8800 {
> +		usb: usb@4ef8800 {
>  			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
>  			reg = <0x04ef8800 0x400>;
>  			#address-cells = <1>;
> @@ -1019,11 +1019,11 @@ usb_1: usb@4ef8800 {
>  			qcom,select-utmi-as-pipe-clk;
>  			status = "disabled";
>  
> -			usb_1_dwc3: usb@4e00000 {
> +			usb_dwc3: usb@4e00000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x04e00000 0xcd00>;
>  				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> -				phys = <&usb_1_hsphy>;
> +				phys = <&usb_hsphy>;
>  				phy-names = "usb2-phy";
>  				iommus = <&apps_smmu 0x120 0x0>;
>  				snps,dis_u2_susphy_quirk;