[PATCH 0/6] arm64: dts: qcom: msm8956-loire: SDCard

[Marijn Suijten]

Add pinctrl nodes to enable SD Cards to work on the Sony Loire platform,
and define extcon nodes in PMI8950 to feed into the ci-hdrc driver as it
cannot figure out the presence of a USB cable (nor the desired role
based on the ID pin) on its own.  While at it, extend PMI8950 with some
more channels with now-available VADC_ register constants.

Depends on:
- Fix pm8941-misc extcon interrupt dependency assumptions:
  https://lore.kernel.org/linux-arm-msm/20220926113143.40768-1-bryan.odonoghue@xxxxxxxxxx/
- dt-bindings: iio: qcom-spmi-vadc: Add definitions for USB DP/DM VADCs:
  https://lore.kernel.org/linux-arm-msm/20221111120156.48040-2-angelogioacchino.delregno@xxxxxxxxxxxxx/

Marijn Suijten (6):
  arm64: dts: qcom: pmi8950: Add USB vbus and id sensing nodes
  arm64: dts: qcom: msm8956-loire: Add usb vbus and id extcons to
    ci-hdrc
  arm64: dts: qcom: pmi8950: Add missing ADC channels
  arm64: dts: qcom: msm8976: Declare and use SDC1 pins
  arm64: dts: qcom: msm8976: Declare and use SDC2 pins
  arm64: dts: qcom: msm8956-loire: Add SD Card Detect to SDC2 pin states

 .../qcom/msm8956-sony-xperia-loire-kugo.dts   |   6 ++
 .../dts/qcom/msm8956-sony-xperia-loire.dtsi   |  25 +++++
 arch/arm64/boot/dts/qcom/msm8976.dtsi         | 100 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/pmi8950.dtsi         |  38 +++++++
 4 files changed, 169 insertions(+)

--
2.39.0