Re: Pine64 Pinebook Pro (rk3399): debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
From: Paul Menzel
Date: Thu Dec 15 2022 - 10:06:22 EST
[now really]
Am 15.12.22 um 16:04 schrieb Paul Menzel:
[Attach output of `dmesg`]
Am 15.12.22 um 16:03 schrieb Paul Menzel:
Dear Linux folks,
Starting Manjaro ARM on a Pine64 Pinebook Pro, Linux 6.0.7 logs:
```
[ 0.000000] Linux version 6.0.7-2-MANJARO-ARM (builduser@fh-mjr-build-lon-xlarge) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Sun Nov 6 23:15:01 UTC 2022
[…]
[ 0.406267] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.406973] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.406992] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.406999] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407007] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407014] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407024] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407032] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407039] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407047] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407054] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407061] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407068] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407075] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407082] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
```
I found a corresponding definition in the devicetree
`arch/arm64/boot/dts/rockchip/rk3399.dtsi`:
```
gic: interrupt-controller@fee00000 {
compatible = "arm,gic-v3";
#interrupt-cells = <4>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
interrupt-controller;
reg = <0x0 0xfee00000 0 0x10000>, /* GICD */
<0x0 0xfef00000 0 0xc0000>, /* GICR */
<0x0 0xfff00000 0 0x10000>, /* GICC */
<0x0 0xfff10000 0 0x10000>, /* GICH */
<0x0 0xfff20000 0 0x10000>; /* GICV */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
its: interrupt-controller@fee20000 {
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
reg = <0x0 0xfee20000 0x0 0x20000>;
};
ppi-partitions {
ppi_cluster0: interrupt-partition-0 {
affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
};
ppi_cluster1: interrupt-partition-1 {
affinity = <&cpu_b0 &cpu_b1>;
};
};
};
```
Kind regards,
Paul
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.0.7-2-MANJARO-ARM (builduser@fh-mjr-build-lon-xlarge) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Sun Nov 6 23:15:01 UTC 2022
[ 0.000000] Machine model: Pine64 Pinebook Pro
[ 0.000000] efi: UEFI not found.
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000083fffff]
[ 0.000000] node 0: [mem 0x000000000a200000-0x00000000f7ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 7680 pages in unavailable ranges
[ 0.000000] cma: Reserved 256 MiB at 0x00000000df600000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 20 pages/cpu s42472 r8192 d31256 u81920
[ 0.000000] pcpu-alloc: s42472 r8192 d31256 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 991752
[ 0.000000] Kernel command line: initrd=/initramfs-linux.img console=ttyS2,1500000 root=PARTUUID=1eeb7b54-686c-447f-80a7-b57c8d7b3345 rw rootwait audit=0 splash plymouth.ignore-serial-consoles
[ 0.000000] audit: disabled (until reboot)
[ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 3656220K/4030464K available (12672K kernel code, 2400K rwdata, 5632K rodata, 3584K init, 669K bss, 112100K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @2080000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000002040000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000002050000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.002293] Console: colour dummy device 80x25
[ 0.002351] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.002366] pid_max: default: 32768 minimum: 301
[ 0.002710] LSM: Security Framework initializing
[ 0.002767] Yama: becoming mindful.
[ 0.002883] AppArmor: AppArmor initialized
[ 0.003120] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.003146] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.004916] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.005779] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.005791] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.005915] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.006178] rcu: Hierarchical SRCU implementation.
[ 0.006182] rcu: Max phase no-delay instances is 1000.
[ 0.007730] Platform MSI: interrupt-controller@fee20000 domain created
[ 0.008196] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.012653] EFI services will not be available.
[ 0.013465] smp: Bringing up secondary CPUs ...
[ 0.014248] Detected VIPT I-cache on CPU1
[ 0.014408] cacheinfo: Unable to detect cache hierarchy for CPU 1
[ 0.014426] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.014446] GICv3: CPU1: using allocated LPI pending table @0x0000000002060000
[ 0.014502] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.015524] Detected VIPT I-cache on CPU2
[ 0.015692] cacheinfo: Unable to detect cache hierarchy for CPU 2
[ 0.015711] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.015730] GICv3: CPU2: using allocated LPI pending table @0x0000000002070000
[ 0.015783] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.016806] Detected VIPT I-cache on CPU3
[ 0.016970] cacheinfo: Unable to detect cache hierarchy for CPU 3
[ 0.016990] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.017009] GICv3: CPU3: using allocated LPI pending table @0x0000000002100000
[ 0.017061] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.027539] CPU features: detected: Spectre-v2
[ 0.028094] CPU features: detected: Spectre-v4
[ 0.028348] CPU features: detected: Spectre-BHB
[ 0.028702] CPU features: detected: ARM erratum 1742098
[ 0.029006] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.029255] Detected PIPT I-cache on CPU4
[ 0.034423] cacheinfo: Unable to detect cache hierarchy for CPU 4
[ 0.035001] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.035689] GICv3: CPU4: using allocated LPI pending table @0x0000000002110000
[ 0.037160] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.055243] Detected PIPT I-cache on CPU5
[ 0.060859] cacheinfo: Unable to detect cache hierarchy for CPU 5
[ 0.061467] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.062185] GICv3: CPU5: using allocated LPI pending table @0x0000000002120000
[ 0.063598] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.068680] smp: Brought up 1 node, 6 CPUs
[ 0.068747] SMP: Total of 6 processors activated.
[ 0.068769] CPU features: detected: 32-bit EL0 Support
[ 0.068777] CPU features: detected: 32-bit EL1 Support
[ 0.068804] CPU features: detected: CRC32 instructions
[ 0.082911] CPU: All CPU(s) started at EL2
[ 0.084007] alternatives: patching kernel code
[ 0.088617] devtmpfs: initialized
[ 0.111422] Registered cp15_barrier emulation handler
[ 0.111791] Registered setend emulation handler
[ 0.112123] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.112192] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.122075] pinctrl core: initialized pinctrl subsystem
[ 0.123646] DMI not present or invalid.
[ 0.125074] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.131099] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.131482] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.131987] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.133951] thermal_sys: Registered thermal governor 'fair_share'
[ 0.133972] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.133980] thermal_sys: Registered thermal governor 'step_wise'
[ 0.133988] thermal_sys: Registered thermal governor 'user_space'
[ 0.135939] cpuidle: using governor ladder
[ 0.136015] cpuidle: using governor menu
[ 0.136316] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.138563] ASID allocator initialised with 65536 entries
[ 0.140504] Serial: AMBA PL011 UART driver
[ 0.165188] platform ff770000.syscon:phy@f780: Fixing up cyclic dependency with fe330000.mmc
[ 0.170189] platform ff970000.edp: Fixing up cyclic dependency with ff8f0000.vop
[ 0.170366] platform ff970000.edp: Fixing up cyclic dependency with ff900000.vop
[ 0.180208] rockchip-gpio ff720000.gpio: probed /pinctrl/gpio@ff720000
[ 0.181507] rockchip-gpio ff730000.gpio: probed /pinctrl/gpio@ff730000
[ 0.182284] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000
[ 0.182959] rockchip-gpio ff788000.gpio: probed /pinctrl/gpio@ff788000
[ 0.183553] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000
[ 0.184900] platform edp-panel: Fixing up cyclic dependency with ff970000.edp
[ 0.208332] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.208528] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.208536] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.208541] HugeTLB: 508 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.208548] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.208555] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.208562] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.208566] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.209196] cryptd: max_cpu_qlen set to 1000
[ 0.211046] ACPI: Interpreter disabled.
[ 0.338865] iommu: Default domain type: Translated
[ 0.339044] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.340731] SCSI subsystem initialized
[ 0.341050] libata version 3.00 loaded.
[ 0.341413] usbcore: registered new interface driver usbfs
[ 0.341476] usbcore: registered new interface driver hub
[ 0.341513] usbcore: registered new device driver usb
[ 0.342252] pps_core: LinuxPPS API ver. 1 registered
[ 0.342271] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.343845] Advanced Linux Sound Architecture Driver Initialized.
[ 0.344892] NetLabel: Initializing
[ 0.344902] NetLabel: domain hash size = 128
[ 0.344911] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.345006] NetLabel: unlabeled traffic allowed by default
[ 0.345303] vgaarb: loaded
[ 0.346613] clocksource: Switched to clocksource arch_sys_counter
[ 0.347063] VFS: Disk quotas dquot_6.6.0
[ 0.347134] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.348037] AppArmor: AppArmor Filesystem Enabled
[ 0.348125] pnp: PnP ACPI: disabled
[ 0.359008] NET: Registered PF_INET protocol family
[ 0.359586] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.364713] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.364803] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.364826] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.365367] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.365933] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.366962] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.367176] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.367638] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.367686] PCI: CLS 0 bytes, default 64
[ 0.369299] Trying to unpack rootfs image as initramfs...
[ 0.384116] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.389418] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.391155] kvm [1]: IPA Size Limit: 40 bits
[ 0.393780] kvm [1]: vgic-v2@fff20000
[ 0.394041] kvm [1]: GIC system register CPU interface enabled
[ 0.399301] kvm [1]: vgic interrupt IRQ18
[ 0.402453] kvm [1]: Hyp mode initialized successfully
[ 0.406267] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.406973] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.406992] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.406999] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407007] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407014] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407024] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407032] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407039] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407047] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407054] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407061] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407068] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407075] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.407082] debugfs: File ':interrupt-controller@fee00000' in directory 'domains' already present!
[ 0.409362] Initialise system trusted keyrings
[ 0.411175] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.419889] zbud: loaded
[ 0.481143] NET: Registered PF_ALG protocol family
[ 0.481452] Key type asymmetric registered
[ 0.481464] Asymmetric key parser 'x509' registered
[ 0.482096] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.483612] io scheduler mq-deadline registered
[ 0.483642] io scheduler kyber registered
[ 0.484139] io scheduler bfq registered
[ 0.582448] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.582691] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.585111] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.585330] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.598965] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.605714] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
[ 0.607580] serial serial0: tty port ttyS0 registered
[ 0.611811] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud = 1500000) is a 16550A
[ 0.612533] printk: console [ttyS2] enabled
[ 0.627704] Serial: AMBA driver
[ 0.645496] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.661313] spi-nor spi0.0: gd25q128 (16384 Kbytes)
[ 0.928297] Freeing initrd memory: 8376K
[ 0.988003] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.988271] ehci-pci: EHCI PCI platform driver
[ 0.988323] ehci-platform: EHCI generic platform driver
[ 0.988697] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.988713] ohci-pci: OHCI PCI platform driver
[ 0.988769] ohci-platform: OHCI generic platform driver
[ 0.990230] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.990941] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 0.991155] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000002002010010
[ 0.991334] xhci-hcd xhci-hcd.0.auto: irq 47, io mem 0xfe900000
[ 0.991542] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.991789] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 0.991807] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 0.992126] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 0.992201] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 0.992227] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
[ 0.992241] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.992253] usb usb1: Product: xHCI Host Controller
[ 0.992262] usb usb1: Manufacturer: Linux 6.0.7-2-MANJARO-ARM xhci-hcd
[ 0.992271] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 0.993134] hub 1-0:1.0: USB hub found
[ 0.993214] hub 1-0:1.0: 1 port detected
[ 0.993952] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.994130] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.00
[ 0.994144] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.994158] usb usb2: Product: xHCI Host Controller
[ 0.994167] usb usb2: Manufacturer: Linux 6.0.7-2-MANJARO-ARM xhci-hcd
[ 0.994175] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 0.994710] hub 2-0:1.0: USB hub found
[ 0.994748] hub 2-0:1.0: 1 port detected
[ 0.995612] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[ 0.995875] ohci-platform fe3e0000.usb: irq 49, io mem 0xfe3e0000
[ 0.996120] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 3
[ 0.996281] ehci-platform fe3c0000.usb: irq 48, io mem 0xfe3c0000
[ 0.997151] usbcore: registered new interface driver uas
[ 0.997323] usbcore: registered new interface driver usb-storage
[ 0.997459] usbcore: registered new interface driver usbserial_generic
[ 0.997498] usbserial: USB Serial support registered for generic
[ 1.000622] mousedev: PS/2 mouse device common for all mice
[ 1.001081] i2c_dev: i2c /dev entries driver
[ 1.010921] rk808 0-001b: chip id: 0x0
[ 1.017063] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 1.018527] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
[ 1.018638] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.018661] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.018674] usb usb3: Product: EHCI Host Controller
[ 1.018679] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.018683] usb usb3: Manufacturer: Linux 6.0.7-2-MANJARO-ARM ehci_hcd
[ 1.018692] usb usb3: SerialNumber: fe3c0000.usb
[ 1.019920] hub 3-0:1.0: USB hub found
[ 1.020024] hub 3-0:1.0: 1 port detected
[ 1.024076] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
[ 1.025432] vcca3v0_codec: Bringing 1800000uV into 3000000-3000000uV
[ 1.033518] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 1.037528] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 1.045622] OF: graph: no port node found in /i2c@ff3d0000/fusb30x@22
[ 1.060890] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.00
[ 1.061113] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.061126] usb usb4: Product: Generic Platform OHCI controller
[ 1.061135] usb usb4: Manufacturer: Linux 6.0.7-2-MANJARO-ARM ohci_hcd
[ 1.061144] usb usb4: SerialNumber: fe3e0000.usb
[ 1.062303] usbcore: registered new interface driver pcwd_usb
[ 1.062683] hub 4-0:1.0: USB hub found
[ 1.062773] hub 4-0:1.0: 1 port detected
[ 1.062862] device-mapper: uevent: version 1.0.3
[ 1.063619] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@xxxxxxxxxx
[ 1.069904] cpu cpu0: EM: created perf domain
[ 1.074245] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 12000 KHz, changing to: 408000 KHz
[ 1.074310] cpu cpu4: EM: OPP:408000 is inefficient
[ 1.074548] cpu cpu4: EM: created perf domain
[ 1.077639] sdhci: Secure Digital Host Controller Interface driver
[ 1.077646] sdhci: Copyright(c) Pierre Ossman
[ 1.077755] Synopsys Designware Multimedia Card Interface Driver
[ 1.078491] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.078539] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[ 1.078560] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[ 1.078573] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[ 1.078618] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 65,32 bit host data width,256 deep fifo
[ 1.078758] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 1.078783] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 1.078791] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 1.078839] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 66,32 bit host data width,256 deep fifo
[ 1.078882] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
[ 1.078890] mmc_host mmc0: card is non-removable.
[ 1.079733] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[ 1.080641] mmc2: CQHCI version 5.10
[ 1.080859] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.081081] No iBFT detected.
[ 1.081680] hid: raw HID events driver (C) Jiri Kosina
[ 1.081802] usbcore: registered new interface driver usbhid
[ 1.081806] usbhid: USB HID core driver
[ 1.084225] Initializing XFRM netlink socket
[ 1.084642] NET: Registered PF_INET6 protocol family
[ 1.092489] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.106445] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
[ 1.115261] Segment Routing with IPv6
[ 1.115316] In-situ OAM (IOAM) with IPv6
[ 1.115395] mip6: Mobile IPv6
[ 1.115401] NET: Registered PF_PACKET protocol family
[ 1.116530] registered taskstats version 1
[ 1.116568] Loading compiled-in X.509 certificates
[ 1.118000] zswap: loaded using pool lzo/zbud
[ 1.118538] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 1.118769] Key type ._fscrypt registered
[ 1.118775] Key type .fscrypt registered
[ 1.118779] Key type fscrypt-provisioning registered
[ 1.119598] Key type encrypted registered
[ 1.171874] mmc2: Command Queue Engine enabled
[ 1.171907] mmc2: new HS200 MMC card at address 0001
[ 1.172698] mmcblk2: mmc2:0001 DA4064 58.2 GiB
[ 1.176324] mmcblk2: p1 p2
[ 1.177658] mmcblk2boot0: mmc2:0001 DA4064 4.00 MiB
[ 1.178962] mmcblk2boot1: mmc2:0001 DA4064 4.00 MiB
[ 1.180173] mmcblk2rpmb: mmc2:0001 DA4064 16.0 MiB, chardev (245:0)
[ 1.206852] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.210643] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[ 1.210681] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[ 1.210694] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[ 1.211104] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 1.323011] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 1.326683] usb 3-1: new high-speed USB device number 2 using ehci-platform
[ 1.529409] usb 3-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.90
[ 1.529447] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.529469] usb 3-1: Product: USB2.0 Hub
[ 1.531304] hub 3-1:1.0: USB hub found
[ 1.531811] hub 3-1:1.0: 4 ports detected
[ 1.806662] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 1.806746] rockchip-pcie: probe of f8000000.pcie failed with error -110
[ 1.816590] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.816850] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 5
[ 1.816974] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000002002010010
[ 1.817024] xhci-hcd xhci-hcd.1.auto: irq 70, io mem 0xfe800000
[ 1.817165] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.817366] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 6
[ 1.817378] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 1.817520] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
[ 1.817528] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.817535] usb usb5: Product: xHCI Host Controller
[ 1.817540] usb usb5: Manufacturer: Linux 6.0.7-2-MANJARO-ARM xhci-hcd
[ 1.817546] usb usb5: SerialNumber: xhci-hcd.1.auto
[ 1.817940] hub 5-0:1.0: USB hub found
[ 1.817966] hub 5-0:1.0: 1 port detected
[ 1.818260] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.818363] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.00
[ 1.818371] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.818377] usb usb6: Product: xHCI Host Controller
[ 1.818382] usb usb6: Manufacturer: Linux 6.0.7-2-MANJARO-ARM xhci-hcd
[ 1.818388] usb usb6: SerialNumber: xhci-hcd.1.auto
[ 1.818743] hub 6-0:1.0: USB hub found
[ 1.818766] hub 6-0:1.0: 1 port detected
[ 1.822870] ALSA device list:
[ 1.822897] No soundcards found.
[ 1.822905] ehci-platform fe380000.usb: EHCI Host Controller
[ 1.823030] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 1.823221] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[ 1.823328] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 7
[ 1.823422] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 8
[ 1.823548] ehci-platform fe380000.usb: irq 71, io mem 0xfe380000
[ 1.823611] ohci-platform fe3a0000.usb: irq 72, io mem 0xfe3a0000
[ 1.847016] usb 3-1.1: new high-speed USB device number 3 using ehci-platform
[ 1.886708] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 1.887204] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
[ 1.887233] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.887255] usb usb7: Product: EHCI Host Controller
[ 1.887272] usb usb7: Manufacturer: Linux 6.0.7-2-MANJARO-ARM ehci_hcd
[ 1.887289] usb usb7: SerialNumber: fe380000.usb
[ 1.888355] hub 7-0:1.0: USB hub found
[ 1.888432] hub 7-0:1.0: 1 port detected
[ 1.891188] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.00
[ 1.891219] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.891241] usb usb8: Product: Generic Platform OHCI controller
[ 1.891258] usb usb8: Manufacturer: Linux 6.0.7-2-MANJARO-ARM ohci_hcd
[ 1.891276] usb usb8: SerialNumber: fe3a0000.usb
[ 1.892373] hub 8-0:1.0: USB hub found
[ 1.892453] hub 8-0:1.0: 1 port detected
[ 1.896721] Freeing unused kernel memory: 3584K
[ 1.936604] Run /init as init process
[ 1.936621] with arguments:
[ 1.936626] /init
[ 1.936630] splash
[ 1.936634] with environment:
[ 1.936637] HOME=/
[ 1.936641] TERM=linux
[ 2.037280] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 57
[ 2.042401] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[ 2.096328] usb 3-1.1: New USB device found, idVendor=0c45, idProduct=6321, bcdDevice= 0.00
[ 2.096353] usb 3-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.096361] usb 3-1.1: Product: USB Camera
[ 2.096367] usb 3-1.1: Manufacturer: Sonix Technology Co., Ltd.
[ 2.381256] rk808-rtc rk808-rtc: registered as rtc0
[ 2.381793] rk808-rtc rk808-rtc: setting system clock to 2022-12-15T11:25:53 UTC (1671103553)
[ 2.409988] rockchip-vop ff8f0000.vop: Adding to iommu group 2
[ 2.410929] rockchip-vop ff900000.vop: Adding to iommu group 3
[ 2.422832] rockchip-dp ff970000.edp: no DP phy configured
[ 2.425004] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[ 2.425170] [drm] unsupported AFBC format[3231564e]
[ 2.426329] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[ 2.427290] rockchip-drm display-subsystem: bound ff970000.edp (ops rockchip_dp_component_ops [rockchipdrm])
[ 2.428543] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[ 2.456464] usb 5-1: new high-speed USB device number 2 using xhci-hcd
[ 2.536493] usb 8-1: new low-speed USB device number 2 using ohci-platform
[ 2.656947] usb 5-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
[ 2.656969] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.656977] usb 5-1: Product: USB2.0 HUB
[ 2.714084] hub 5-1:1.0: USB hub found
[ 2.714265] hub 5-1:1.0: 4 ports detected
[ 2.817561] Console: switching to colour frame buffer device 240x67
[ 2.873541] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[ 2.921595] usb 8-1: New USB device found, idVendor=258a, idProduct=001e, bcdDevice= 1.00
[ 2.921620] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.921626] usb 8-1: Product: USB KEYBOARD
[ 2.921632] usb 8-1: Manufacturer: HAILUCK CO.,LTD
[ 2.931416] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.0/0003:258A:001E.0001/input/input0
[ 2.997201] hid-generic 0003:258A:001E.0001: input,hidraw0: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input0
[ 3.014346] input: gpio-key-lid as /devices/platform/gpio-key-lid/input/input1
[ 3.019447] input: gpio-key-power as /devices/platform/gpio-key-power/input/input2
[ 3.035107] input: HAILUCK CO.,LTD USB KEYBOARD Mouse as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.1/0003:258A:001E.0002/input/input3
[ 3.043910] input: HAILUCK CO.,LTD USB KEYBOARD Touchpad as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.1/0003:258A:001E.0002/input/input4
[ 3.044411] input: HAILUCK CO.,LTD USB KEYBOARD System Control as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.1/0003:258A:001E.0002/input/input5
[ 3.117143] input: HAILUCK CO.,LTD USB KEYBOARD Consumer Control as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.1/0003:258A:001E.0002/input/input6
[ 3.117480] input: HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.1/0003:258A:001E.0002/input/input7
[ 3.118151] hid-multitouch 0003:258A:001E.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input1
[ 3.326541] usb 5-1.1: new full-speed USB device number 3 using xhci-hcd
[ 3.464278] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Quota mode: none.
[ 3.568499] usb 5-1.1: New USB device found, idVendor=0639, idProduct=7210, bcdDevice=86.08
[ 3.568528] usb 5-1.1: New USB device strings: Mfr=1, Product=4, SerialNumber=2
[ 3.568537] usb 5-1.1: Product: Billboard
[ 3.568544] usb 5-1.1: Manufacturer: Chrontel
[ 3.568551] usb 5-1.1: SerialNumber: CH7210
[ 3.766488] usb 5-1.4: new high-speed USB device number 4 using xhci-hcd
[ 3.886823] systemd[1]: systemd 251.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 3.894906] systemd[1]: Detected architecture arm64.
[ 3.917523] systemd[1]: Hostname set to <pinebookpro>.
[ 3.998438] usb 5-1.4: New USB device found, idVendor=1209, idProduct=4201, bcdDevice= 5.09
[ 3.998485] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.998507] usb 5-1.4: Product: PinePhone
[ 3.998524] usb 5-1.4: Manufacturer: Pine64
[ 3.998541] usb 5-1.4: SerialNumber: Jumpdrive
[ 4.059923] usb-storage 5-1.4:1.2: USB Mass Storage device detected
[ 4.061313] scsi host0: usb-storage 5-1.4:1.2
[ 4.476544] usb 5-1.2: new high-speed USB device number 5 using xhci-hcd
[ 4.729755] usb 5-1.2: New USB device found, idVendor=0fe6, idProduct=9900, bcdDevice=20.00
[ 4.729800] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.729822] usb 5-1.2: Product: 10/100M LAN
[ 4.729839] usb 5-1.2: Manufacturer: CoreChips
[ 4.729855] usb 5-1.2: SerialNumber: 00F001E01AA6
[ 4.804057] systemd[1]: Queued start job for default target Graphical Interface.
[ 4.930840] systemd[1]: Created slice Slice /system/getty.
[ 4.933661] systemd[1]: Created slice Slice /system/modprobe.
[ 4.935820] systemd[1]: Created slice Slice /system/serial-getty.
[ 4.937569] systemd[1]: Created slice User and Session Slice.
[ 4.938328] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.939598] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.940093] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 4.940470] systemd[1]: Reached target Remote Encrypted Volumes.
[ 4.940718] systemd[1]: Reached target Remote File Systems.
[ 4.940980] systemd[1]: Reached target Slice Units.
[ 4.941291] systemd[1]: Reached target Swaps.
[ 4.941704] systemd[1]: Reached target Local Verity Protected Volumes.
[ 4.942504] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.946363] systemd[1]: Listening on LVM2 poll daemon socket.
[ 4.952911] systemd[1]: Listening on Process Core Dump Socket.
[ 4.964344] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
[ 4.965718] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.967365] systemd[1]: Listening on Journal Socket.
[ 4.969060] systemd[1]: Listening on Network Service Netlink Socket.
[ 4.970285] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
[ 4.973272] systemd[1]: Listening on udev Control Socket.
[ 4.974539] systemd[1]: Listening on udev Kernel Socket.
[ 4.975725] systemd[1]: Listening on User Database Manager Socket.
[ 4.982147] systemd[1]: Mounting Huge Pages File System...
[ 4.988905] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.995094] systemd[1]: Mounting Kernel Debug File System...
[ 4.996605] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
[ 5.003662] systemd[1]: Mounting Temporary Directory /tmp...
[ 5.011463] systemd[1]: Starting Create List of Static Device Nodes...
[ 5.017849] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 5.024050] systemd[1]: Starting Load Kernel Module configfs...
[ 5.029991] systemd[1]: Starting Load Kernel Module drm...
[ 5.036181] systemd[1]: Starting Load Kernel Module fuse...
[ 5.037265] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 5.045069] systemd[1]: Starting Journal Service...
[ 5.052742] systemd[1]: Starting Load Kernel Modules...
[ 5.056149] fuse: init (API version 7.36)
[ 5.057729] systemd[1]: Starting Generate network units from Kernel command line...
[ 5.063247] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.064171] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[ 5.069445] systemd[1]: Starting Coldplug All udev Devices...
[ 5.077592] systemd[1]: Mounted Huge Pages File System.
[ 5.078765] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.079896] systemd[1]: Mounted Kernel Debug File System.
[ 5.080940] systemd[1]: Mounted Temporary Directory /tmp.
[ 5.082636] systemd[1]: Finished Create List of Static Device Nodes.
[ 5.095789] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 5.096242] systemd[1]: Finished Load Kernel Module configfs.
[ 5.097420] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 5.097882] systemd[1]: Finished Load Kernel Module drm.
[ 5.099114] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 5.099581] systemd[1]: Finished Load Kernel Module fuse.
[ 5.100679] systemd[1]: Finished Load Kernel Modules.
[ 5.101207] EXT4-fs (mmcblk2p2): re-mounted. Quota mode: none.
[ 5.103233] systemd[1]: Finished Generate network units from Kernel command line.
[ 5.105619] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 5.111656] systemd[1]: Mounting FUSE Control File System...
[ 5.117340] systemd[1]: Mounting Kernel Configuration File System...
[ 5.117820] scsi 0:0:0:0: Direct-Access JumpDriv e eMMC PQ: 0 ANSI: 2
[ 5.118026] systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
[ 5.118572] scsi 0:0:0:1: Direct-Access JumpDriv e microSD PQ: 0 ANSI: 2
[ 5.120889] sd 0:0:0:1: Power-on or device reset occurred
[ 5.121330] sd 0:0:0:1: [sdb] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
[ 5.121350] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
[ 5.121621] sd 0:0:0:1: [sdb] Write Protect is off
[ 5.121634] sd 0:0:0:1: [sdb] Mode Sense: 0f 00 00 00
[ 5.121659] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 5.121823] sd 0:0:0:0: Power-on or device reset occurred
[ 5.122150] sd 0:0:0:0: [sda] 60620800 512-byte logical blocks: (31.0 GB/28.9 GiB)
[ 5.122297] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.122446] sd 0:0:0:0: [sda] Write Protect is off
[ 5.122457] sd 0:0:0:0: [sda] Mode Sense: 0f 00 00 00
[ 5.122603] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.126320] systemd[1]: Starting Load/Save Random Seed...
[ 5.130355] sdb: sdb1
[ 5.130378] random: lvm: uninitialized urandom read (4 bytes read)
[ 5.131289] systemd[1]: Starting Apply Kernel Variables...
[ 5.131853] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
[ 5.132915] sda: sda1 sda2
[ 5.133228] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 5.135312] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 5.148739] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.152156] systemd[1]: Starting Setup Virtual Console...
[ 5.155611] systemd[1]: Mounted FUSE Control File System.
[ 5.157314] systemd[1]: Mounted Kernel Configuration File System.
[ 5.170718] systemd[1]: Finished Apply Kernel Variables.
[ 5.208663] systemd[1]: Started Journal Service.
[ 5.245447] systemd-journald[311]: Received client request to flush runtime journal.
[ 5.858275] mc: Linux media interface: v0.10
[ 5.867020] es8316 1-0011: Failed to get IRQ 0: -22
[ 5.906904] videodev: Linux video capture interface: v2.00
[ 5.908775] FAT-fs (mmcblk2p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5.966066] rockchip-rga ff680000.rga: HW Version: 0x03.02
[ 5.984416] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.985684] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.986844] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
[ 5.990174] rkvdec ff660000.video-codec: Adding to iommu group 1
[ 5.990398] hantro-vpu ff650000.video-codec: Adding to iommu group 0
[ 6.005999] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video2
[ 6.006133] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video3
[ 6.025002] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.029456] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.pine64,pinebook-pro.bin failed with error -2
[ 6.042624] usbcore: registered new interface driver brcmfmac
[ 6.094489] Bluetooth: Core ver 2.22
[ 6.095942] NET: Registered PF_BLUETOOTH protocol family
[ 6.095960] Bluetooth: HCI device and connection manager initialized
[ 6.095981] Bluetooth: HCI socket layer initialized
[ 6.095990] Bluetooth: L2CAP socket layer initialized
[ 6.096024] Bluetooth: SCO socket layer initialized
[ 6.116456] random: crng init done
[ 6.137715] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.144825] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2
[ 6.153403] usb 3-1.1: Found UVC 1.00 device USB Camera (0c45:6321)
[ 6.198788] input: USB Camera: USB Camera as /devices/platform/fe3c0000.usb/usb3/3-1/3-1.1/3-1.1:1.0/input/input8
[ 6.200147] usbcore: registered new interface driver uvcvideo
[ 6.202632] dw_wdt ff848000.watchdog: No valid TOPs array specified
[ 6.207554] Bluetooth: HCI UART driver ver 2.3
[ 6.207576] Bluetooth: HCI UART protocol H4 registered
[ 6.207580] Bluetooth: HCI UART protocol BCSP registered
[ 6.210176] Bluetooth: HCI UART protocol LL registered
[ 6.210189] Bluetooth: HCI UART protocol ATH3K registered
[ 6.210230] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 6.210452] Bluetooth: HCI UART protocol Intel registered
[ 6.214228] Bluetooth: HCI UART protocol Broadcom registered
[ 6.214267] Bluetooth: HCI UART protocol QCA registered
[ 6.214540] Bluetooth: HCI UART protocol Marvell registered
[ 6.326599] dw-apb-uart ff180000.serial: failed to request DMA
[ 6.353772] panfrost ff9a0000.gpu: clock rate = 500000000
[ 6.428585] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[ 6.428612] panfrost ff9a0000.gpu: features: 00000000,00000407, issues: 00000000,24040400
[ 6.428621] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[ 6.428629] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[ 6.567116] [drm] Initialized panfrost 1.2.0 20180908 for ff9a0000.gpu on minor 1
[ 6.617322] Bluetooth: hci0: BCM: chip id 107
[ 6.617704] Bluetooth: hci0: BCM: features 0x2f
[ 6.619923] Bluetooth: hci0: BCM4345C0
[ 6.619940] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 6.620211] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[ 6.620215] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.pine64,pinebook-pro.hcd'
[ 6.620218] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd'
[ 6.620221] Bluetooth: hci0: BCM: 'brcm/BCM.pine64,pinebook-pro.hcd'
[ 6.620223] Bluetooth: hci0: BCM: 'brcm/BCM.hcd'
[ 6.691749] input: rockchip,es8316-codec Headphones as /devices/platform/es8316-sound/sound/card0/input9
[ 6.764821] cdc_ether 5-1.2:2.0 eth0: register 'cdc_ether' at usb-xhci-hcd.1.auto-1.2, CDC Ethernet Device, 00:f0:01:e0:1a:a6
[ 6.764930] usbcore: registered new interface driver cdc_ether
[ 6.840228] rndis_host 5-1.4:1.0 usb0: register 'rndis_host' at usb-xhci-hcd.1.auto-1.4, RNDIS device, 96:43:de:22:0d:a0
[ 6.850368] usbcore: registered new interface driver rndis_host
[ 6.860524] usbcore: registered new interface driver rndis_wlan
[ 7.005758] zram: Added device: zram0
[ 7.018882] zram0: detected capacity change from 0 to 11790976
[ 7.058870] Adding 5895484k swap on /dev/zram0. Priority:100 extents:1 across:5895484k SSFS
[ 7.117566] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.117599] Bluetooth: BNEP filters: protocol multicast
[ 7.117623] Bluetooth: BNEP socket layer initialized
[ 7.126522] Bluetooth: MGMT ver 1.22
[ 8.644876] bpfilter: Loaded bpfilter_umh pid 487
[ 8.645972] Started bpfilter
[ 17.117860] platform hdmi-sound: deferred probe pending
[ 20.719172] Bluetooth: RFCOMM TTY layer initialized
[ 20.719239] Bluetooth: RFCOMM socket layer initialized
[ 20.719270] Bluetooth: RFCOMM ver 1.11
[ 28.321124] usb 5-1: USB disconnect, device number 2
[ 28.321253] usb 5-1.1: USB disconnect, device number 3
[ 28.323615] usb 5-1.2: USB disconnect, device number 5
[ 28.324384] cdc_ether 5-1.2:2.0 eth0: unregister 'cdc_ether' usb-xhci-hcd.1.auto-1.2, CDC Ethernet Device
[ 28.442491] usb 5-1.4: USB disconnect, device number 4
[ 28.442871] rndis_host 5-1.4:1.0 usb0: unregister 'rndis_host' usb-xhci-hcd.1.auto-1.4, RNDIS device
[ 28.636853] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 28.637058] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 28.846889] sd 0:0:0:1: [sdb] Synchronizing SCSI cache
[ 28.847245] sd 0:0:0:1: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 29.316595] usb 5-1: new high-speed USB device number 6 using xhci-hcd
[ 29.517274] usb 5-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
[ 29.517326] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 29.517379] usb 5-1: Product: USB2.0 HUB
[ 29.562270] hub 5-1:1.0: USB hub found
[ 29.562461] hub 5-1:1.0: 4 ports detected
[ 29.986458] usb 5-1.1: new full-speed USB device number 7 using xhci-hcd
[ 30.219306] usb 5-1.1: New USB device found, idVendor=0639, idProduct=7210, bcdDevice=86.08
[ 30.219357] usb 5-1.1: New USB device strings: Mfr=1, Product=4, SerialNumber=2
[ 30.219380] usb 5-1.1: Product: Billboard
[ 30.219397] usb 5-1.1: Manufacturer: Chrontel
[ 30.219414] usb 5-1.1: SerialNumber: CH7210
[ 30.416697] usb 5-1.2: new high-speed USB device number 8 using xhci-hcd
[ 30.647307] usb 5-1.2: New USB device found, idVendor=0fe6, idProduct=9900, bcdDevice=20.00
[ 30.647341] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 30.647348] usb 5-1.2: Product: 10/100M LAN
[ 30.647354] usb 5-1.2: Manufacturer: CoreChips
[ 30.647360] usb 5-1.2: SerialNumber: 00F001E01AA6
[ 30.683840] cdc_ether 5-1.2:2.0 eth0: register 'cdc_ether' at usb-xhci-hcd.1.auto-1.2, CDC Ethernet Device, 00:f0:01:e0:1a:a6
[ 30.876636] usb 5-1.4: new high-speed USB device number 9 using xhci-hcd
[ 31.117273] usb 5-1.4: New USB device found, idVendor=1209, idProduct=4201, bcdDevice= 5.09
[ 31.117421] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 31.117432] usb 5-1.4: Product: PinePhone
[ 31.117439] usb 5-1.4: Manufacturer: Pine64
[ 31.117446] usb 5-1.4: SerialNumber: Jumpdrive
[ 31.163972] rndis_host 5-1.4:1.0 usb0: register 'rndis_host' at usb-xhci-hcd.1.auto-1.4, RNDIS device, 96:43:de:22:0d:a0
[ 31.166039] usb-storage 5-1.4:1.2: USB Mass Storage device detected
[ 31.166936] scsi host0: usb-storage 5-1.4:1.2
[ 31.836816] LDO_REG1: disabling
[ 32.169541] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.237936] scsi 0:0:0:0: Direct-Access JumpDriv e eMMC PQ: 0 ANSI: 2
[ 32.238669] scsi 0:0:0:1: Direct-Access JumpDriv e microSD PQ: 0 ANSI: 2
[ 32.240931] sd 0:0:0:0: Power-on or device reset occurred
[ 32.241851] sd 0:0:0:0: [sda] 60620800 512-byte logical blocks: (31.0 GB/28.9 GiB)
[ 32.242690] sd 0:0:0:1: Power-on or device reset occurred
[ 32.243634] sd 0:0:0:1: [sdb] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
[ 32.244124] sd 0:0:0:0: [sda] Write Protect is off
[ 32.244147] sd 0:0:0:0: [sda] Mode Sense: 0f 00 00 00
[ 32.244652] sd 0:0:0:1: [sdb] Write Protect is off
[ 32.244674] sd 0:0:0:1: [sdb] Mode Sense: 0f 00 00 00
[ 32.245117] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 32.247245] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 32.253315] sda: sda1 sda2
[ 32.259399] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 32.262501] sdb: sdb1
[ 32.263823] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 1049.312593] PM: suspend entry (deep)
[ 1049.521191] Filesystems sync: 0.208 seconds
[ 1049.523179] Freezing user space processes ... (elapsed 0.004 seconds) done.
[ 1049.527514] OOM killer disabled.
[ 1049.527521] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1049.529285] printk: Suspending console(s) (use no_console_suspend to debug)
[ 1049.601034] sd 0:0:0:1: [sdb] Synchronizing SCSI cache
[ 1049.601156] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1049.601830] rndis_host 5-1.4:1.0 usb0: unregister 'rndis_host' usb-xhci-hcd.1.auto-1.4, RNDIS device
[ 1049.671331] usb 5-1-port4: cannot reset (err = -71)
[ 1049.671534] usb 5-1-port4: cannot reset (err = -71)
[ 1049.671544] usb 5-1-port4: Cannot enable. Maybe the USB cable is bad?
[ 1049.671734] usb 5-1-port4: cannot disable (err = -71)
[ 1049.671927] usb 5-1-port4: cannot reset (err = -71)
[ 1049.672118] usb 5-1-port4: cannot reset (err = -71)
[ 1049.672128] usb 5-1-port4: Cannot enable. Maybe the USB cable is bad?
[ 1049.672298] usb 5-1-port4: cannot disable (err = -71)
[ 1049.672400] usb 5-1-port4: cannot reset (err = -71)
[ 1049.672500] usb 5-1-port4: cannot reset (err = -71)
[ 1049.672509] usb 5-1-port4: Cannot enable. Maybe the USB cable is bad?
[ 1049.672604] usb 5-1-port4: cannot disable (err = -71)
[ 1049.672714] usb 5-1-port4: cannot reset (err = -71)
[ 1049.672812] usb 5-1-port4: cannot reset (err = -71)
[ 1049.672821] usb 5-1-port4: Cannot enable. Maybe the USB cable is bad?
[ 1049.672917] usb 5-1-port4: cannot disable (err = -71)
[ 1049.673016] usb 5-1-port4: cannot disable (err = -71)
[ 1050.281145] sd 0:0:0:1: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 1050.281172] sd 0:0:0:1: PM: dpm_run_callback(): scsi_bus_suspend+0x0/0xdc returns -5
[ 1050.281207] sd 0:0:0:1: PM: failed to suspend async: error -5
[ 1050.281303] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 1050.281316] sd 0:0:0:0: PM: dpm_run_callback(): scsi_bus_suspend+0x0/0xdc returns -5
[ 1050.281348] sd 0:0:0:0: PM: failed to suspend async: error -5
[ 1050.537057] PM: Some devices failed to suspend, or early wake event detected
[ 1050.538218] hub 3-1:1.0: hub_ext_port_status failed (err = -113)
[ 1050.538251] usb 3-1-port1: cannot disable (err = -113)
[ 1050.539742] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[ 1050.540066] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[ 1050.540124] usb 5-1-port1: cannot disable (err = -71)
[ 1050.540269] usb 5-1-port2: cannot disable (err = -71)
[ 1050.660943] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1050.794730] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 1051.643371] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 59
[ 1051.650929] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 1051.651133] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.pine64,pinebook-pro.bin failed with error -2
[ 1051.652782] PM: resume devices took 1.120 seconds
[ 1051.652841] OOM killer enabled.
[ 1051.652845] Restarting tasks ...
[ 1051.659750] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[ 1051.659948] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[ 1051.660008] usb 5-1: USB disconnect, device number 6
[ 1051.660196] done.
[ 1051.660230] random: crng reseeded on system resumption
[ 1051.660334] PM: suspend exit
[ 1051.660525] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[ 1051.660771] usb 5-1.1: USB disconnect, device number 7
[ 1051.676604] PM: suspend entry (s2idle)
[ 1051.716254] usb 5-1.2: USB disconnect, device number 8
[ 1051.716597] cdc_ether 5-1.2:2.0 eth0: unregister 'cdc_ether' usb-xhci-hcd.1.auto-1.2, CDC Ethernet Device
[ 1051.763917] usb 3-1.1: USB disconnect, device number 3
[ 1051.767598] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 1051.772526] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2
[ 1051.835428] usb 5-1.4: USB disconnect, device number 9
[ 1051.871022] sda: detected capacity change from 60620800 to 0
[ 1051.871194] sd 0:0:0:1: [sdb] Test Unit Ready failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 1051.871213] sdb: detected capacity change from 124735488 to 0
[ 1051.879149] Filesystems sync: 0.202 seconds
[ 1051.880108] Freezing user space processes ... (elapsed 0.019 seconds) done.
[ 1051.899657] OOM killer disabled.
[ 1051.899663] Freezing remaining freezable tasks ...
[ 1051.990906] usb 3-1.1: new high-speed USB device number 4 using ehci-platform
[ 1052.201916] usb 3-1.1: New USB device found, idVendor=0c45, idProduct=6321, bcdDevice= 0.00
[ 1052.201964] usb 3-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1052.201986] usb 3-1.1: Product: USB Camera
[ 1052.202004] usb 3-1.1: Manufacturer: Sonix Technology Co., Ltd.
[ 1052.207622] usb 3-1.1: Found UVC 1.00 device USB Camera (0c45:6321)
[ 1052.243248] input: USB Camera: USB Camera as /devices/platform/fe3c0000.usb/usb3/3-1/3-1.1/3-1.1:1.0/input/input10
[ 1052.421014] usb 5-1: new high-speed USB device number 10 using xhci-hcd
[ 1052.601437] usb 5-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
[ 1052.601486] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1052.601509] usb 5-1: Product: USB2.0 HUB
[ 1052.666338] hub 5-1:1.0: USB hub found
[ 1052.666477] hub 5-1:1.0: 4 ports detected
[ 1052.669065] (elapsed 0.769 seconds) done.
[ 1052.669110] printk: Suspending console(s) (use no_console_suspend to debug)
[ 1052.770972] hub 5-1:1.0: hub_ext_port_status failed (err = -113)
[ 1053.533581] PM: suspend devices took 0.870 seconds
[ 1053.544559] ------------[ cut here ]------------
[ 1053.544576] clk_spi1 already disabled
[ 1053.544685] WARNING: CPU: 1 PID: 1522 at drivers/clk/clk.c:963 clk_core_disable+0xb0/0xc0
[ 1053.544734] Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device rfcomm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_tables ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_raw iptable_security nfnetlink ip6table_filter ip6_tables iptable_filter bpfilter bnep zram rndis_wlan rndis_host cdc_ether usbnet mii snd_soc_simple_amplifier panfrost hci_uart dw_wdt btqca watchdog gpu_sched snd_soc_rockchip_i2s btrtl drm_shmem_helper uvcvideo typec_displayport btbcm btsdio btintel videobuf2_vmalloc bluetooth joydev hantro_vpu(C) rockchip_vdec(C) brcmfmac v4l2_vp9 v4l2_h264 rockchip_rga brcmutil videobuf2_dma_contig ecdh_generic v4l2_mem2mem videobuf2_dma_sg videobuf2_memops ecc cfg80211 videobuf2_v4l2 videobuf2_common rfkill cw2015_battery videodev snd_soc_simple_card snd_soc_es8316 snd_soc_simple_card_utils mc
[ 1053.545334] rockchip_saradc snd_soc_core rockchip_thermal ac97_bus snd_pcm_dmaengine snd_pcm snd_timer gpio_charger crypto_user fuse gpio_keys pwm_bl panel_edp drm_dp_aux_bus rockchipdrm drm_cma_helper analogix_dp dw_hdmi cec rc_core dw_mipi_dsi drm_display_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm backlight rtc_rk808
[ 1053.545562] CPU: 1 PID: 1522 Comm: systemd-sleep Tainted: G C 6.0.7-2-MANJARO-ARM #1
[ 1053.545584] Hardware name: Pine64 Pinebook Pro (DT)
[ 1053.545595] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1053.545616] pc : clk_core_disable+0xb0/0xc0
[ 1053.545637] lr : clk_core_disable+0xb0/0xc0
[ 1053.545656] sp : ffff80000a9039d0
[ 1053.545665] x29: ffff80000a9039d0 x28: ffff0000022924f8 x27: 0000000000000002
[ 1053.545697] x26: ffff80000874e560 x25: ffff8000095a3564 x24: ffff80000975efd0
[ 1053.545729] x23: 0000000000000000 x22: ffff8000097e4000 x21: ffff0000033e7e00
[ 1053.545761] x20: ffff000002191c00 x19: ffff000002191c00 x18: ffffffffffffffff
[ 1053.545792] x17: 000000040044ffff x16: 00100072b5503510 x15: fffffffffff8d377
[ 1053.545824] x14: 0000000000000022 x13: 0a64656c62617369 x12: 642079646165726c
[ 1053.545855] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : ffff80000a9039d0
[ 1053.545887] x8 : ffff8000095a3be8 x7 : ffff80000a9037c0 x6 : 000000000000000d
[ 1053.545918] x5 : ffff0000f775ea50 x4 : 0000000000000000 x3 : 0000000000000027
[ 1053.545948] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00002a7eec80
[ 1053.545979] Call trace:
[ 1053.545986] clk_core_disable+0xb0/0xc0
[ 1053.546008] clk_disable+0x30/0x4c
[ 1053.546031] rockchip_spi_suspend+0x34/0x70
[ 1053.546052] dpm_run_callback+0x50/0xf0
[ 1053.546073] __device_suspend_noirq+0x6c/0x1f0
[ 1053.546092] dpm_noirq_suspend_devices+0x13c/0x23c
[ 1053.546111] dpm_suspend_noirq+0x24/0x9c
[ 1053.546130] suspend_enter+0x1b0/0x320
[ 1053.546154] suspend_devices_and_enter+0x158/0x1f0
[ 1053.546176] enter_state+0x204/0x288
[ 1053.546197] pm_suspend+0x58/0xd0
[ 1053.546217] state_store+0x80/0xec
[ 1053.546237] kobj_attr_store+0x18/0x30
[ 1053.546258] sysfs_kf_write+0x44/0x54
[ 1053.546284] kernfs_fop_write_iter+0x118/0x1e0
[ 1053.546307] vfs_write+0x1a0/0x2d0
[ 1053.546333] ksys_write+0x6c/0x100
[ 1053.546355] __arm64_sys_write+0x1c/0x30
[ 1053.546378] invoke_syscall+0x70/0xf4
[ 1053.546403] el0_svc_common.constprop.0+0x44/0xec
[ 1053.546427] do_el0_svc+0x28/0x34
[ 1053.546449] el0_svc+0x2c/0x84
[ 1053.546469] el0t_64_sync_handler+0xf4/0x120
[ 1053.546490] el0t_64_sync+0x18c/0x190
[ 1053.546508] ---[ end trace 0000000000000000 ]---
[ 1053.546521] ------------[ cut here ]------------
[ 1053.546527] clk_spi1 already unprepared
[ 1053.546627] WARNING: CPU: 1 PID: 1522 at drivers/clk/clk.c:822 clk_core_unprepare+0xf0/0x110
[ 1053.546659] Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device rfcomm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_tables ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_raw iptable_security nfnetlink ip6table_filter ip6_tables iptable_filter bpfilter bnep zram rndis_wlan rndis_host cdc_ether usbnet mii snd_soc_simple_amplifier panfrost hci_uart dw_wdt btqca watchdog gpu_sched snd_soc_rockchip_i2s btrtl drm_shmem_helper uvcvideo typec_displayport btbcm btsdio btintel videobuf2_vmalloc bluetooth joydev hantro_vpu(C) rockchip_vdec(C) brcmfmac v4l2_vp9 v4l2_h264 rockchip_rga brcmutil videobuf2_dma_contig ecdh_generic v4l2_mem2mem videobuf2_dma_sg videobuf2_memops ecc cfg80211 videobuf2_v4l2 videobuf2_common rfkill cw2015_battery videodev snd_soc_simple_card snd_soc_es8316 snd_soc_simple_card_utils mc
[ 1053.547217] rockchip_saradc snd_soc_core rockchip_thermal ac97_bus snd_pcm_dmaengine snd_pcm snd_timer gpio_charger crypto_user fuse gpio_keys pwm_bl panel_edp drm_dp_aux_bus rockchipdrm drm_cma_helper analogix_dp dw_hdmi cec rc_core dw_mipi_dsi drm_display_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm backlight rtc_rk808
[ 1053.547428] CPU: 1 PID: 1522 Comm: systemd-sleep Tainted: G WC 6.0.7-2-MANJARO-ARM #1
[ 1053.547448] Hardware name: Pine64 Pinebook Pro (DT)
[ 1053.547456] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1053.547476] pc : clk_core_unprepare+0xf0/0x110
[ 1053.547499] lr : clk_core_unprepare+0xf0/0x110
[ 1053.547520] sp : ffff80000a9039d0
[ 1053.547528] x29: ffff80000a9039d0 x28: ffff0000022924f8 x27: 0000000000000002
[ 1053.547561] x26: ffff80000874e560 x25: ffff8000095a3564 x24: ffff80000975efd0
[ 1053.547592] x23: 0000000000000000 x22: ffff8000097e4000 x21: ffff0000033e7e00
[ 1053.547623] x20: ffff000002d18580 x19: ffff000002191c00 x18: ffffffffffffffff
[ 1053.547655] x17: 000000040044ffff x16: 00100072b5503510 x15: fffffffffff8e207
[ 1053.547686] x14: 0000000000000022 x13: 0a64657261706572 x12: 706e752079646165
[ 1053.547718] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : ffff80000a9039d0
[ 1053.547749] x8 : ffff8000095a3be8 x7 : ffff80000a9037c0 x6 : 000000000000000d
[ 1053.547780] x5 : ffff0000f775ea50 x4 : 0000000000000000 x3 : 0000000000000027
[ 1053.547810] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00002a7eec80
[ 1053.547840] Call trace:
[ 1053.547847] clk_core_unprepare+0xf0/0x110
[ 1053.547870] clk_unprepare+0x2c/0x44
[ 1053.547892] rockchip_spi_suspend+0x3c/0x70
[ 1053.547911] dpm_run_callback+0x50/0xf0
[ 1053.547929] __device_suspend_noirq+0x6c/0x1f0
[ 1053.547947] dpm_noirq_suspend_devices+0x13c/0x23c
[ 1053.547966] dpm_suspend_noirq+0x24/0x9c
[ 1053.547985] suspend_enter+0x1b0/0x320
[ 1053.548006] suspend_devices_and_enter+0x158/0x1f0
[ 1053.548029] enter_state+0x204/0x288
[ 1053.548048] pm_suspend+0x58/0xd0
[ 1053.548068] state_store+0x80/0xec
[ 1053.548087] kobj_attr_store+0x18/0x30
[ 1053.548105] sysfs_kf_write+0x44/0x54
[ 1053.548129] kernfs_fop_write_iter+0x118/0x1e0
[ 1053.548152] vfs_write+0x1a0/0x2d0
[ 1053.548175] ksys_write+0x6c/0x100
[ 1053.548197] __arm64_sys_write+0x1c/0x30
[ 1053.548220] invoke_syscall+0x70/0xf4
[ 1053.548243] el0_svc_common.constprop.0+0x44/0xec
[ 1053.548267] do_el0_svc+0x28/0x34
[ 1053.548289] el0_svc+0x2c/0x84
[ 1053.548308] el0t_64_sync_handler+0xf4/0x120
[ 1053.548328] el0t_64_sync+0x18c/0x190
[ 1053.548345] ---[ end trace 0000000000000000 ]---
[ 1053.548357] ------------[ cut here ]------------
[ 1053.548362] pclk_spi1 already disabled
[ 1053.548460] WARNING: CPU: 1 PID: 1522 at drivers/clk/clk.c:963 clk_core_disable+0xb0/0xc0
[ 1053.548490] Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device rfcomm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_tables ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_raw iptable_security nfnetlink ip6table_filter ip6_tables iptable_filter bpfilter bnep zram rndis_wlan rndis_host cdc_ether usbnet mii snd_soc_simple_amplifier panfrost hci_uart dw_wdt btqca watchdog gpu_sched snd_soc_rockchip_i2s btrtl drm_shmem_helper uvcvideo typec_displayport btbcm btsdio btintel videobuf2_vmalloc bluetooth joydev hantro_vpu(C) rockchip_vdec(C) brcmfmac v4l2_vp9 v4l2_h264 rockchip_rga brcmutil videobuf2_dma_contig ecdh_generic v4l2_mem2mem videobuf2_dma_sg videobuf2_memops ecc cfg80211 videobuf2_v4l2 videobuf2_common rfkill cw2015_battery videodev snd_soc_simple_card snd_soc_es8316 snd_soc_simple_card_utils mc
[ 1053.549044] rockchip_saradc snd_soc_core rockchip_thermal ac97_bus snd_pcm_dmaengine snd_pcm snd_timer gpio_charger crypto_user fuse gpio_keys pwm_bl panel_edp drm_dp_aux_bus rockchipdrm drm_cma_helper analogix_dp dw_hdmi cec rc_core dw_mipi_dsi drm_display_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm backlight rtc_rk808
[ 1053.549255] CPU: 1 PID: 1522 Comm: systemd-sleep Tainted: G WC 6.0.7-2-MANJARO-ARM #1
[ 1053.549275] Hardware name: Pine64 Pinebook Pro (DT)
[ 1053.549284] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1053.549303] pc : clk_core_disable+0xb0/0xc0
[ 1053.549323] lr : clk_core_disable+0xb0/0xc0
[ 1053.549342] sp : ffff80000a9039d0
[ 1053.549349] x29: ffff80000a9039d0 x28: ffff0000022924f8 x27: 0000000000000002
[ 1053.549382] x26: ffff80000874e560 x25: ffff8000095a3564 x24: ffff80000975efd0
[ 1053.549414] x23: 0000000000000000 x22: ffff8000097e4000 x21: ffff0000033e7e00
[ 1053.549445] x20: ffff00000217a900 x19: ffff00000217a900 x18: ffffffffffffffff
[ 1053.549476] x17: 000000040044ffff x16: 00100072b5503510 x15: fffffffffff8f09f
[ 1053.549508] x14: 0000000000000022 x13: 0a64656c62617369 x12: 642079646165726c
[ 1053.549540] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : ffff80000a9039d0
[ 1053.549571] x8 : ffff8000095a3be8 x7 : ffff80000a9037c0 x6 : 000000000000000d
[ 1053.549602] x5 : ffff0000f775ea50 x4 : 0000000000000000 x3 : 0000000000000027
[ 1053.549632] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00002a7eec80
[ 1053.549663] Call trace:
[ 1053.549669] clk_core_disable+0xb0/0xc0
[ 1053.549690] clk_disable+0x30/0x4c
[ 1053.549711] rockchip_spi_suspend+0x48/0x70
[ 1053.549730] dpm_run_callback+0x50/0xf0
[ 1053.549748] __device_suspend_noirq+0x6c/0x1f0
[ 1053.549767] dpm_noirq_suspend_devices+0x13c/0x23c
[ 1053.549786] dpm_suspend_noirq+0x24/0x9c
[ 1053.549805] suspend_enter+0x1b0/0x320
[ 1053.549825] suspend_devices_and_enter+0x158/0x1f0
[ 1053.549847] enter_state+0x204/0x288
[ 1053.549866] pm_suspend+0x58/0xd0
[ 1053.549886] state_store+0x80/0xec
[ 1053.549906] kobj_attr_store+0x18/0x30
[ 1053.549923] sysfs_kf_write+0x44/0x54
[ 1053.549948] kernfs_fop_write_iter+0x118/0x1e0
[ 1053.549972] vfs_write+0x1a0/0x2d0
[ 1053.549995] ksys_write+0x6c/0x100
[ 1053.550017] __arm64_sys_write+0x1c/0x30
[ 1053.550040] invoke_syscall+0x70/0xf4
[ 1053.550063] el0_svc_common.constprop.0+0x44/0xec
[ 1053.550087] do_el0_svc+0x28/0x34
[ 1053.550108] el0_svc+0x2c/0x84
[ 1053.550127] el0t_64_sync_handler+0xf4/0x120
[ 1053.550148] el0t_64_sync+0x18c/0x190
[ 1053.550165] ---[ end trace 0000000000000000 ]---
[ 1053.550175] ------------[ cut here ]------------
[ 1053.550181] pclk_spi1 already unprepared
[ 1053.550278] WARNING: CPU: 1 PID: 1522 at drivers/clk/clk.c:822 clk_core_unprepare+0xf0/0x110
[ 1053.550310] Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device rfcomm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_tables ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_raw iptable_security nfnetlink ip6table_filter ip6_tables iptable_filter bpfilter bnep zram rndis_wlan rndis_host cdc_ether usbnet mii snd_soc_simple_amplifier panfrost hci_uart dw_wdt btqca watchdog gpu_sched snd_soc_rockchip_i2s btrtl drm_shmem_helper uvcvideo typec_displayport btbcm btsdio btintel videobuf2_vmalloc bluetooth joydev hantro_vpu(C) rockchip_vdec(C) brcmfmac v4l2_vp9 v4l2_h264 rockchip_rga brcmutil videobuf2_dma_contig ecdh_generic v4l2_mem2mem videobuf2_dma_sg videobuf2_memops ecc cfg80211 videobuf2_v4l2 videobuf2_common rfkill cw2015_battery videodev snd_soc_simple_card snd_soc_es8316 snd_soc_simple_card_utils mc
[ 1053.550865] rockchip_saradc snd_soc_core rockchip_thermal ac97_bus snd_pcm_dmaengine snd_pcm snd_timer gpio_charger crypto_user fuse gpio_keys pwm_bl panel_edp drm_dp_aux_bus rockchipdrm drm_cma_helper analogix_dp dw_hdmi cec rc_core dw_mipi_dsi drm_display_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm backlight rtc_rk808
[ 1053.551076] CPU: 1 PID: 1522 Comm: systemd-sleep Tainted: G WC 6.0.7-2-MANJARO-ARM #1
[ 1053.551095] Hardware name: Pine64 Pinebook Pro (DT)
[ 1053.551104] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1053.551123] pc : clk_core_unprepare+0xf0/0x110
[ 1053.551146] lr : clk_core_unprepare+0xf0/0x110
[ 1053.551168] sp : ffff80000a9039d0
[ 1053.551176] x29: ffff80000a9039d0 x28: ffff0000022924f8 x27: 0000000000000002
[ 1053.551208] x26: ffff80000874e560 x25: ffff8000095a3564 x24: ffff80000975efd0
[ 1053.551240] x23: 0000000000000000 x22: ffff8000097e4000 x21: ffff0000033e7e00
[ 1053.551272] x20: ffff0000033e7800 x19: ffff00000217a900 x18: ffffffffffffffff
[ 1053.551303] x17: 000000040044ffff x16: 00100072b5503510 x15: fffffffffff8ff2f
[ 1053.551335] x14: 0000000000000022 x13: 0a64657261706572 x12: 706e752079646165
[ 1053.551366] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : ffff80000a9039d0
[ 1053.551398] x8 : ffff8000095a3be8 x7 : ffff80000a9037c0 x6 : 000000000000000d
[ 1053.551429] x5 : ffff0000f775ea50 x4 : 0000000000000000 x3 : 0000000000000027
[ 1053.551459] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00002a7eec80
[ 1053.551489] Call trace:
[ 1053.551496] clk_core_unprepare+0xf0/0x110
[ 1053.551519] clk_unprepare+0x2c/0x44
[ 1053.551541] rockchip_spi_suspend+0x50/0x70
[ 1053.551560] dpm_run_callback+0x50/0xf0
[ 1053.551578] __device_suspend_noirq+0x6c/0x1f0
[ 1053.551596] dpm_noirq_suspend_devices+0x13c/0x23c
[ 1053.551615] dpm_suspend_noirq+0x24/0x9c
[ 1053.551634] suspend_enter+0x1b0/0x320
[ 1053.551655] suspend_devices_and_enter+0x158/0x1f0
[ 1053.551677] enter_state+0x204/0x288
[ 1053.551696] pm_suspend+0x58/0xd0
[ 1053.551717] state_store+0x80/0xec
[ 1053.551736] kobj_attr_store+0x18/0x30
[ 1053.551754] sysfs_kf_write+0x44/0x54
[ 1053.551777] kernfs_fop_write_iter+0x118/0x1e0
[ 1053.551801] vfs_write+0x1a0/0x2d0
[ 1053.551824] ksys_write+0x6c/0x100
[ 1053.551846] __arm64_sys_write+0x1c/0x30
[ 1053.551869] invoke_syscall+0x70/0xf4
[ 1053.551892] el0_svc_common.constprop.0+0x44/0xec
[ 1053.551916] do_el0_svc+0x28/0x34
[ 1053.551938] el0_svc+0x2c/0x84
[ 1053.551957] el0t_64_sync_handler+0xf4/0x120
[ 1053.551977] el0t_64_sync+0x18c/0x190
[ 1053.551994] ---[ end trace 0000000000000000 ]---
[ 1053.687076] xhci-hcd xhci-hcd.0.auto: xHC error in resume, USBSTS 0x401, Reinit
[ 1053.687098] usb usb1: root hub lost power or was reset
[ 1053.687106] usb usb2: root hub lost power or was reset
[ 1053.731813] xhci-hcd xhci-hcd.1.auto: xHC error in resume, USBSTS 0x411, Reinit
[ 1053.731849] usb usb5: root hub lost power or was reset
[ 1053.731864] usb usb6: root hub lost power or was reset
[ 1053.813344] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1053.935118] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 1054.084245] usb 5-1: reset high-speed USB device number 10 using xhci-hcd
[ 1054.773842] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 60
[ 1054.788542] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 1054.788906] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.pine64,pinebook-pro.bin failed with error -2
[ 1054.791012] PM: resume devices took 1.110 seconds
[ 1054.791170] OOM killer enabled.
[ 1054.791174] Restarting tasks ... done.
[ 1054.801863] random: crng reseeded on system resumption
[ 1054.802029] PM: suspend exit
[ 1054.905547] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 1054.910876] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2
[ 1055.003087] usb 5-1.1: new full-speed USB device number 11 using xhci-hcd
[ 1055.248351] usb 5-1.1: New USB device found, idVendor=0639, idProduct=7210, bcdDevice=86.08
[ 1055.248400] usb 5-1.1: New USB device strings: Mfr=1, Product=4, SerialNumber=2
[ 1055.248423] usb 5-1.1: Product: Billboard
[ 1055.248441] usb 5-1.1: Manufacturer: Chrontel
[ 1055.248458] usb 5-1.1: SerialNumber: CH7210
[ 1055.443314] usb 5-1.2: new high-speed USB device number 12 using xhci-hcd
[ 1055.676122] usb 5-1.2: New USB device found, idVendor=0fe6, idProduct=9900, bcdDevice=20.00
[ 1055.676172] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1055.676194] usb 5-1.2: Product: 10/100M LAN
[ 1055.676212] usb 5-1.2: Manufacturer: CoreChips
[ 1055.676229] usb 5-1.2: SerialNumber: 00F001E01AA6
[ 1055.721647] cdc_ether 5-1.2:2.0 eth0: register 'cdc_ether' at usb-xhci-hcd.1.auto-1.2, CDC Ethernet Device, 00:f0:01:e0:1a:a6
[ 1055.923333] usb 5-1.4: new high-speed USB device number 13 using xhci-hcd
[ 1056.156105] usb 5-1.4: New USB device found, idVendor=1209, idProduct=4201, bcdDevice= 5.09
[ 1056.156153] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1056.156175] usb 5-1.4: Product: PinePhone
[ 1056.156193] usb 5-1.4: Manufacturer: Pine64
[ 1056.156210] usb 5-1.4: SerialNumber: Jumpdrive
[ 1056.202430] rndis_host 5-1.4:1.0 usb0: register 'rndis_host' at usb-xhci-hcd.1.auto-1.4, RNDIS device, 96:43:de:22:0d:a0
[ 1056.204201] usb-storage 5-1.4:1.2: USB Mass Storage device detected
[ 1056.205831] scsi host1: usb-storage 5-1.4:1.2
[ 1057.284327] scsi 1:0:0:0: Direct-Access JumpDriv e eMMC PQ: 0 ANSI: 2
[ 1057.284763] scsi 1:0:0:1: Direct-Access JumpDriv e microSD PQ: 0 ANSI: 2
[ 1057.286253] sd 1:0:0:0: Power-on or device reset occurred
[ 1057.287083] sd 1:0:0:0: [sda] 60620800 512-byte logical blocks: (31.0 GB/28.9 GiB)
[ 1057.287659] sd 1:0:0:1: Power-on or device reset occurred
[ 1057.288191] sd 1:0:0:1: [sdb] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
[ 1057.288532] sd 1:0:0:0: [sda] Write Protect is off
[ 1057.288543] sd 1:0:0:0: [sda] Mode Sense: 0f 00 00 00
[ 1057.288821] sd 1:0:0:1: [sdb] Write Protect is off
[ 1057.288833] sd 1:0:0:1: [sdb] Mode Sense: 0f 00 00 00
[ 1057.289052] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1057.289292] sd 1:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1057.296052] sda: sda1 sda2
[ 1057.296716] sdb: sdb1
[ 1057.303474] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 1057.305039] sd 1:0:0:1: [sdb] Attached SCSI removable disk
[ 1373.005195] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1811.610969] systemd[1]: systemd 252.2-4-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 1811.612105] systemd[1]: Detected architecture arm64.
[ 1811.794963] systemd[1]: bpf-lsm: BPF LSM hook not enabled in the kernel, BPF LSM not supported
[ 1881.466573] EXT4-fs (sda2): 1 orphan inode deleted
[ 1881.466589] EXT4-fs (sda2): recovery complete
[ 1881.483832] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[ 2015.485530] EXT4-fs (sda2): unmounting filesystem.