[PATCH v2 1/5] iio: pressure: bmp280: Add enumeration to handle chip variants
From: Angel Iglesias
Date: Mon Dec 26 2022 - 09:31:43 EST
Adds enumeration to improve handling the different supported sensors
on driver initialization. This avoid collisions if different variants
share the same device idetifier on ID register.
Signed-off-by: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index c0aff78489b4..46959a91408f 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -186,6 +186,7 @@ struct bmp280_data {
struct bmp280_chip_info {
unsigned int id_reg;
+ const unsigned int chip_id;
const struct iio_chan_spec *channels;
int num_channels;
@@ -907,6 +908,7 @@ static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 };
static const struct bmp280_chip_info bmp280_chip_info = {
.id_reg = BMP280_REG_ID,
+ .chip_id = BMP280_CHIP_ID,
.start_up_time = 2000,
.channels = bmp280_channels,
.num_channels = 2,
@@ -955,6 +957,7 @@ static int bme280_chip_config(struct bmp280_data *data)
static const struct bmp280_chip_info bme280_chip_info = {
.id_reg = BMP280_REG_ID,
+ .chip_id = BME280_CHIP_ID,
.start_up_time = 2000,
.channels = bmp280_channels,
.num_channels = 3,
@@ -1321,6 +1324,7 @@ static const int bmp380_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 12
static const struct bmp280_chip_info bmp380_chip_info = {
.id_reg = BMP380_REG_ID,
+ .chip_id = BMP380_CHIP_ID,
.start_up_time = 2000,
.channels = bmp380_channels,
.num_channels = 2,
@@ -1581,6 +1585,7 @@ static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 };
static const struct bmp280_chip_info bmp180_chip_info = {
.id_reg = BMP280_REG_ID,
+ .chip_id = BMP180_CHIP_ID,
.start_up_time = 2000,
.channels = bmp280_channels,
.num_channels = 2,
@@ -1685,16 +1690,16 @@ int bmp280_common_probe(struct device *dev,
indio_dev->modes = INDIO_DIRECT_MODE;
switch (chip) {
- case BMP180_CHIP_ID:
+ case BMP180:
chip_info = &bmp180_chip_info;
break;
- case BMP280_CHIP_ID:
+ case BMP280:
chip_info = &bmp280_chip_info;
break;
- case BME280_CHIP_ID:
+ case BME280:
chip_info = &bme280_chip_info;
break;
- case BMP380_CHIP_ID:
+ case BMP380:
chip_info = &bmp380_chip_info;
break;
default:
@@ -1751,9 +1756,9 @@ int bmp280_common_probe(struct device *dev,
ret = regmap_read(regmap, data->chip_info->id_reg, &chip_id);
if (ret < 0)
return ret;
- if (chip_id != chip) {
+ if (chip_id != data->chip_info->chip_id) {
dev_err(dev, "bad chip id: expected %x got %x\n",
- chip, chip_id);
+ data->chip_info->chip_id, chip_id);
return -EINVAL;
}
diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c
index 14eab086d24a..59921e8cd592 100644
--- a/drivers/iio/pressure/bmp280-i2c.c
+++ b/drivers/iio/pressure/bmp280-i2c.c
@@ -12,14 +12,14 @@ static int bmp280_i2c_probe(struct i2c_client *client)
const struct i2c_device_id *id = i2c_client_get_device_id(client);
switch (id->driver_data) {
- case BMP180_CHIP_ID:
+ case BMP180:
regmap_config = &bmp180_regmap_config;
break;
- case BMP280_CHIP_ID:
- case BME280_CHIP_ID:
+ case BMP280:
+ case BME280:
regmap_config = &bmp280_regmap_config;
break;
- case BMP380_CHIP_ID:
+ case BMP380:
regmap_config = &bmp380_regmap_config;
break;
default:
@@ -40,21 +40,21 @@ static int bmp280_i2c_probe(struct i2c_client *client)
}
static const struct of_device_id bmp280_of_i2c_match[] = {
- { .compatible = "bosch,bmp085", .data = (void *)BMP180_CHIP_ID },
- { .compatible = "bosch,bmp180", .data = (void *)BMP180_CHIP_ID },
- { .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID },
- { .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID },
- { .compatible = "bosch,bmp380", .data = (void *)BMP380_CHIP_ID },
+ { .compatible = "bosch,bmp085", .data = (void *)BMP180 },
+ { .compatible = "bosch,bmp180", .data = (void *)BMP180 },
+ { .compatible = "bosch,bmp280", .data = (void *)BMP280 },
+ { .compatible = "bosch,bme280", .data = (void *)BME280 },
+ { .compatible = "bosch,bmp380", .data = (void *)BMP380 },
{ },
};
MODULE_DEVICE_TABLE(of, bmp280_of_i2c_match);
static const struct i2c_device_id bmp280_i2c_id[] = {
- {"bmp085", BMP180_CHIP_ID },
- {"bmp180", BMP180_CHIP_ID },
- {"bmp280", BMP280_CHIP_ID },
- {"bme280", BME280_CHIP_ID },
- {"bmp380", BMP380_CHIP_ID },
+ {"bmp085", BMP180 },
+ {"bmp180", BMP180 },
+ {"bmp280", BMP280 },
+ {"bme280", BME280 },
+ {"bmp380", BMP380 },
{ },
};
MODULE_DEVICE_TABLE(i2c, bmp280_i2c_id);
diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c
index 011c68e07ebf..4a2df5b5d838 100644
--- a/drivers/iio/pressure/bmp280-spi.c
+++ b/drivers/iio/pressure/bmp280-spi.c
@@ -59,14 +59,14 @@ static int bmp280_spi_probe(struct spi_device *spi)
}
switch (id->driver_data) {
- case BMP180_CHIP_ID:
+ case BMP180:
regmap_config = &bmp180_regmap_config;
break;
- case BMP280_CHIP_ID:
- case BME280_CHIP_ID:
+ case BMP280:
+ case BME280:
regmap_config = &bmp280_regmap_config;
break;
- case BMP380_CHIP_ID:
+ case BMP380:
regmap_config = &bmp380_regmap_config;
break;
default:
@@ -101,11 +101,11 @@ static const struct of_device_id bmp280_of_spi_match[] = {
MODULE_DEVICE_TABLE(of, bmp280_of_spi_match);
static const struct spi_device_id bmp280_spi_id[] = {
- { "bmp180", BMP180_CHIP_ID },
- { "bmp181", BMP180_CHIP_ID },
- { "bmp280", BMP280_CHIP_ID },
- { "bme280", BME280_CHIP_ID },
- { "bmp380", BMP380_CHIP_ID },
+ { "bmp180", BMP180 },
+ { "bmp181", BMP180 },
+ { "bmp280", BMP280 },
+ { "bme280", BME280 },
+ { "bmp380", BMP380 },
{ }
};
MODULE_DEVICE_TABLE(spi, bmp280_spi_id);
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index c791325c7416..efc31bc84708 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -191,6 +191,14 @@
#define BMP280_PRESS_SKIPPED 0x80000
#define BMP280_HUMIDITY_SKIPPED 0x8000
+/* Enum with supported pressure sensor models */
+enum bmp280_variant {
+ BMP180,
+ BMP280,
+ BME280,
+ BMP380,
+};
+
/* Regmap configurations */
extern const struct regmap_config bmp180_regmap_config;
extern const struct regmap_config bmp280_regmap_config;
--
2.39.0