Re: [PATCH v2 5/9] dt-bindings: net: motorcomm: add support for Motorcomm YT8531

[yanhong wang]

On 2022/12/16 19:15, Krzysztof Kozlowski wrote:
> On 16/12/2022 08:06, Yanhong Wang wrote:
>> Add support for Motorcomm Technology YT8531 10/100/1000 Ethernet PHY.
>> The document describe details of clock delay train configuration.
>> 
>> Signed-off-by: Yanhong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>
> 
> Missing vendor prefix documentation. I don't think you tested this at
> all with checkpatch and dt_binding_check.
> 
>> ---
>>  .../bindings/net/motorcomm,yt8531.yaml        | 111 ++++++++++++++++++
>>  MAINTAINERS                                   |   1 +
>>  2 files changed, 112 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/net/motorcomm,yt8531.yaml
>> 
>> diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8531.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8531.yaml
>> new file mode 100644
>> index 000000000000..c5b8a09a78bb
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8531.yaml
>> @@ -0,0 +1,111 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/motorcomm,yt8531.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Motorcomm YT8531 Gigabit Ethernet PHY
>> +
>> +maintainers:
>> +  - Yanhong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>
>> +
> 
> Why there is no reference to ethernet-phy.yaml?
> 
>> +select:
>> +  properties:
>> +    $nodename:
>> +      pattern: "^ethernet-phy(@[a-f0-9]+)?$"
> 
> I don't think that's correct approach. You know affect all phys.
> 
>> +
>> +  required:
>> +    - $nodename
>> +
>> +properties:
>> +  $nodename:
>> +    pattern: "^ethernet-phy(@[a-f0-9]+)?$"
> 
> Just reference ethernet-phy.yaml.
> 
>> +
>> +  reg:
>> +    minimum: 0
>> +    maximum: 31
>> +    description:
>> +      The ID number for the PHY.
> 
> Drop duplicated properties.
> 
>> +
>> +  rxc_dly_en:
> 
> No underscores in node names. Missing vendor prefix. Both apply to all
> your other custom properties, unless they are not custom but generic.
> 
> Missing ref.
> 
>> +    description: |
>> +      RGMII Receive PHY Clock Delay defined with fixed 2ns.This is used for
> 
> After every full stop goes space.
> 
>> +      PHY that have configurable RX internal delays. If this property set
>> +      to 1, then automatically add 2ns delay pad for Receive PHY clock.
> 
> Nope, this is wrong. You wrote now boolean property as enum.
> 
>> +    enum: [0, 1]
>> +    default: 0
>> +
>> +  rx_delay_sel:
>> +    description: |
>> +      This is supplement to rxc_dly_en property,and it can
>> +      be specified in 150ps(pico seconds) steps. The effective
>> +      delay is: 150ps * N.
> 
> Nope. Use proper units and drop all this register stuff.
> 
>> +    minimum: 0
>> +    maximum: 15
>> +    default: 0
>> +
>> +  tx_delay_sel_fe:
>> +    description: |
>> +      RGMII Transmit PHY Clock Delay defined in pico seconds.This is used for
>> +      PHY's that have configurable TX internal delays when speed is 100Mbps
>> +      or 10Mbps. It can be specified in 150ps steps, the effective delay
>> +      is: 150ps * N.
> 
> The binding is in very poor shape. Please look carefully in
> example-schema. All my previous comments apply everywhere.
> 
>> +    minimum: 0
>> +    maximum: 15
>> +    default: 15
>> +
>> +  tx_delay_sel:
>> +    description: |
>> +      RGMII Transmit PHY Clock Delay defined in pico seconds.This is used for
>> +      PHY's that have configurable TX internal delays when speed is 1000Mbps.
>> +      It can be specified in 150ps steps, the effective delay is: 150ps * N.
>> +    minimum: 0
>> +    maximum: 15
>> +    default: 1
>> +
>> +  tx_inverted_10:
>> +    description: |
>> +      Use original or inverted RGMII Transmit PHY Clock to drive the RGMII
>> +      Transmit PHY Clock delay train configuration when speed is 10Mbps.
>> +      0: original   1: inverted
>> +    enum: [0, 1]
>> +    default: 0
>> +
>> +  tx_inverted_100:
>> +    description: |
>> +      Use original or inverted RGMII Transmit PHY Clock to drive the RGMII
>> +      Transmit PHY Clock delay train configuration when speed is 100Mbps.
>> +      0: original   1: inverted
>> +    enum: [0, 1]
>> +    default: 0
>> +
>> +  tx_inverted_1000:
>> +    description: |
>> +      Use original or inverted RGMII Transmit PHY Clock to drive the RGMII
>> +      Transmit PHY Clock delay train configuration when speed is 1000Mbps.
>> +      0: original   1: inverted
>> +    enum: [0, 1]
>> +    default: 0
>> +
>> +required:
>> +  - reg
>> +
>> +additionalProperties: true
> 
> This must be false. After referencing ethernet-phy this should be
> unevaluatedProperties: false.
> 
> 

Thanks. Parts of this patch exist already, after discussion unanimity was achieved,
i will remove the parts of YT8531 in the next version.

> Best regards,
> Krzysztof
>