[PATCH v2 0/3] StarFive's SDIO/eMMC driver support

[William Qiu]

Hi,

This patchset adds initial rudimentary support for the StarFive
designware mobile storage host controller driver. And this driver will
be used in StarFive's VisionFive 2 board. The main purpose of adding
this driver is to accommodate the ultra-high speed mode of eMMC.

The last patch should be applied after the patchset [1]:
[1] https://lore.kernel.org/all/20221118011714.70877-1-hal.feng@xxxxxxxxxxxxxxxx/

Changes since v1:
- Renamed the dt-binding 'starfive,jh7110-sdio.yaml' to 'starfive,jh7110-mmc.yaml'.
- Changed the type of 'starfive,syscon' and modify its description.
- Deleted unused head files like '#include <linux/gpio.h>'.
- Added comment for the 'rise_point' and 'fall_point'.
- Changed the API 'num_caps' to 'common_caps'.
- Changed the node name 'sys_syscon' to 'syscon'.
- Changed the node name 'sdio' to 'mmc'.

The patch series is based on v6.1-rc5.

William Qiu (3):
  dt-bindings: mmc: Add bindings for StarFive
  mmc: starfive: Add sdio/emmc driver support
  riscv: dts: starfive: Add mmc node

 .../bindings/mmc/starfive,jh7110-mmc.yaml     |  72 +++++++
 MAINTAINERS                                   |   6 +
 .../jh7110-starfive-visionfive-v2.dts         |  25 +++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      |  38 ++++
 drivers/mmc/host/Kconfig                      |  10 +
 drivers/mmc/host/Makefile                     |   1 +
 drivers/mmc/host/dw_mmc-starfive.c            | 185 ++++++++++++++++++
 7 files changed, 337 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
 create mode 100644 drivers/mmc/host/dw_mmc-starfive.c

--
2.34.1