Re: [PATCH] octeontx2_pf: Select NET_DEVLINK when enabling OCTEONTX2_PF

[Leon Romanovsky]

On Mon, Dec 19, 2022 at 12:11:28PM -0500, Paul Gazzillo wrote:
> When using COMPILE_TEST, the driver controlled by OCTEONTX2_PF does
> not select NET_DEVLINK while the related OCTEONTX2_AF driver does.
> This means that when OCTEONTX2_PF is enabled from a default
> configuration, linker errors will occur due to undefined references to
> code controlled by NET_DEVLINK.
> 
> 1. make.cross ARCH=x86_64 defconfig
> 2. make.cross ARCH=x86_64 menuconfig
> 3. Enable COMPILE_TEST
>    General setup  --->
>      Compile also drivers which will not load
> 4. Enable OCTEONTX2_PF
>    Device Drivers  --->
>      Network device support  --->
>        Ethernet driver support  --->
>          Marvell OcteonTX2 NIC Physical Function driver
> 5. Exit and save configuration.  NET_DEVLINK will still be disabled.
> 6. make.cross ARCH=x86_64 several linker errors, for example,
>    ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o:
>      in function `otx2_register_dl':
>    otx2_devlink.c:(.text+0x142): undefined reference to `devlink_alloc_ns'
> 
> This fix adds "select NET_DEVLINK" link to OCTEONTX2_PF's Kconfig
> specification to match OCTEONTX2_AF.
> 
> Fixes: 2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count")
> Signed-off-by: Paul Gazzillo <paul@xxxxxxxxx>
> ---
> v1 -> v2: Added the fixes tag
> 
>  drivers/net/ethernet/marvell/octeontx2/Kconfig | 1 +
>  1 file changed, 1 insertion(+)
> 

Thanks,
Reviewed-by: Leon Romanovsky <leonro@xxxxxxxxxx>