[PATCH v5 1/2] dt-bindings: remoteproc: ti: Add new compatible for AM62 SoC family
From: Devarsh Thakkar
Date: Tue Dec 27 2022 - 09:52:35 EST
AM62 family of devices don't have a R5F cluster, instead
they have single core DM R5F.
Add new compatible string ti,am62-r5fss to support this scenario.
When this new compatible is used don't allow cluster-mode
property usage in device-tree as this implies that there
is no R5F cluster available and only single R5F core
is present.
Signed-off-by: Devarsh Thakkar <devarsht@xxxxxx>
---
V2: Avoid acronyms, use "Device Manager" instead of "DM"
V3:
- Use separate if block for each compatible for ti,cluster-mode property
- Rearrange compatibles as per alphabatical order
V4: Place each enum in separate line in allOf
V5: No change (fixing typo in email address)
---
.../bindings/remoteproc/ti,k3-r5f-rproc.yaml | 65 ++++++++++++++-----
1 file changed, 47 insertions(+), 18 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
index fb9605f0655b..b1602cc42888 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -21,6 +21,9 @@ description: |
called "Single-CPU" mode, where only Core0 is used, but with ability to use
Core1's TCMs as well.
+ AM62 SoC family support a single R5F core only which runs Device Manager
+ firmware and can also be used as a remote processor with IPC communication.
+
Each Dual-Core R5F sub-system is represented as a single DTS node
representing the cluster, with a pair of child DT nodes representing
the individual R5F cores. Each node has a number of required or optional
@@ -28,16 +31,20 @@ description: |
the device management of the remote processor and to communicate with the
remote processor.
+ Since AM62 SoC family only support a single core, there is no cluster-mode
+ property setting required for it.
+
properties:
$nodename:
pattern: "^r5fss(@.*)?"
compatible:
enum:
+ - ti,am62-r5fss
+ - ti,am64-r5fss
- ti,am654-r5fss
- - ti,j721e-r5fss
- ti,j7200-r5fss
- - ti,am64-r5fss
+ - ti,j721e-r5fss
- ti,j721s2-r5fss
power-domains:
@@ -80,7 +87,9 @@ patternProperties:
node representing a TI instantiation of the Arm Cortex R5F core. There
are some specific integration differences for the IP like the usage of
a Region Address Translator (RAT) for translating the larger SoC bus
- addresses into a 32-bit address space for the processor.
+ addresses into a 32-bit address space for the processor. For AM62x,
+ the R5F Sub-System device node should only define one R5F child node
+ as it has only one core available.
Each R5F core has an associated 64 KB of Tightly-Coupled Memory (TCM)
internal memories split between two banks - TCMA and TCMB (further
@@ -100,10 +109,11 @@ patternProperties:
properties:
compatible:
enum:
+ - ti,am62-r5f
+ - ti,am64-r5f
- ti,am654-r5f
- - ti,j721e-r5f
- ti,j7200-r5f
- - ti,am64-r5f
+ - ti,j721e-r5f
- ti,j721s2-r5f
reg:
@@ -208,19 +218,38 @@ patternProperties:
unevaluatedProperties: false
-if:
- properties:
- compatible:
- enum:
- - ti,am64-r5fss
-then:
- properties:
- ti,cluster-mode:
- enum: [0, 2]
-else:
- properties:
- ti,cluster-mode:
- enum: [0, 1]
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - ti,am64-r5fss
+ then:
+ properties:
+ ti,cluster-mode:
+ enum: [0, 2]
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - ti,am654-r5fss
+ - ti,j7200-r5fss
+ - ti,j721e-r5fss
+ - ti,j721s2-r5fss
+ then:
+ properties:
+ ti,cluster-mode:
+ enum: [0, 1]
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - ti,am62-r5fss
+ then:
+ properties:
+ ti,cluster-mode: false
required:
- compatible
--
2.17.1