[PATCH 11/14] drm/panel-sharp-ls060t1sx01: Drop custom DSI write macro

[Javier Martinez Canillas]

There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use
that instead and delete the custom DSI write macro defined in the driver.

Signed-off-by: Javier Martinez Canillas <javierm@xxxxxxxxxx>
---

 .../gpu/drm/panel/panel-sharp-ls060t1sx01.c   | 19 ++-----------------
 1 file changed, 2 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c b/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c
index 8a4e0c1fe73f..68f52eaaf4fa 100644
--- a/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c
+++ b/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c
@@ -32,12 +32,6 @@ static inline struct sharp_ls060 *to_sharp_ls060(struct drm_panel *panel)
 	return container_of(panel, struct sharp_ls060, panel);
 }
 
-#define dsi_dcs_write_seq(dsi, seq...) ({				\
-		static const u8 d[] = { seq };				\
-									\
-		mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d));	\
-	})
-
 static void sharp_ls060_reset(struct sharp_ls060 *ctx)
 {
 	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
@@ -56,17 +50,8 @@ static int sharp_ls060_on(struct sharp_ls060 *ctx)
 
 	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
 
-	ret = dsi_dcs_write_seq(dsi, 0xbb, 0x13);
-	if (ret < 0) {
-		dev_err(dev, "Failed to send command: %d\n", ret);
-		return ret;
-	}
-
-	ret = dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START);
-	if (ret < 0) {
-		dev_err(dev, "Failed to send command: %d\n", ret);
-		return ret;
-	}
+	mipi_dsi_dcs_write_seq(dsi, 0xbb, 0x13);
+	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START);
 
 	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
 	if (ret < 0) {
-- 
2.38.1