Re: [PATCH v3 4/4] arm64: dts: qcom: sc7180: Add pazquel360 touschreen

From: Bjorn Andersson
Date: Tue Dec 27 2022 - 22:33:19 EST


On Fri, Dec 09, 2022 at 09:12:40AM -0800, Douglas Anderson wrote:
> The touchscreen was supposed to have been added when pazquel360 first
> was added upstream but was missed. Add it now.
>
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> ---
>
> Changes in v3:
> - Removed hid-descr-addr
>
> .../dts/qcom/sc7180-trogdor-pazquel360.dtsi | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
> index 5702325d0c7b..ff9dd6857f8b 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
> @@ -14,6 +14,25 @@ &alc5682 {
> realtek,dmic-clk-rate-hz = <2048000>;
> };
>
> +ap_ts_pen_1v8: &i2c4 {
> + status = "okay";

I'm told that we want status to be the last property, so I moved it
one step down as I applied the patch.

Thanks,
Bjorn

> + clock-frequency = <400000>;
> +
> + ap_ts: touchscreen@10 {
> + compatible = "elan,ekth3915", "elan,ekth3500";
> + reg = <0x10>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
> +
> + interrupt-parent = <&tlmm>;
> + interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
> +
> + vcc33-supply = <&pp3300_ts>;
> + vccio-supply = <&pp1800_l10a>;
> + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> &keyboard_controller {
> function-row-physmap = <
> MATRIX_KEY(0x00, 0x02, 0) /* T1 */
> --
> 2.39.0.rc1.256.g54fd8350bd-goog
>