Since `Arc<T>` does not allow mutating `T` directly (i.e., without inner
mutability), it is currently not possible to do some initialisation of
`T` post construction but before being shared.
`UniqueArc<T>` addresses this problem essentially being an `Arc<T>` that
has a refcount of 1 and is therefore writable. Once initialisation is
completed, it can be transitioned (without failure paths) into an
`Arc<T>`.
Suggested-by: Gary Guo <gary@xxxxxxxxxxx>
Signed-off-by: Wedson Almeida Filho <wedsonaf@xxxxxxxxx>
---
rust/kernel/sync.rs | 2 +-
rust/kernel/sync/arc.rs | 152 +++++++++++++++++++++++++++++++++++++++-
2 files changed, 151 insertions(+), 3 deletions(-)
diff --git a/rust/kernel/sync.rs b/rust/kernel/sync.rs
index 5de03ea83ea1..33da23e3076d 100644
--- a/rust/kernel/sync.rs
+++ b/rust/kernel/sync.rs
@@ -7,4 +7,4 @@
mod arc;
-pub use arc::{Arc, ArcBorrow};
+pub use arc::{Arc, ArcBorrow, UniqueArc};
diff --git a/rust/kernel/sync/arc.rs b/rust/kernel/sync/arc.rs
index 84f31c85a513..832bafc74a90 100644
--- a/rust/kernel/sync/arc.rs
+++ b/rust/kernel/sync/arc.rs
@@ -19,8 +19,9 @@ use crate::{bindings, error::Result, types::Opaque};
use alloc::boxed::Box;
use core::{
marker::{PhantomData, Unsize},
- mem::ManuallyDrop,
- ops::Deref,
+ mem::{ManuallyDrop, MaybeUninit},
+ ops::{Deref, DerefMut},
+ pin::Pin,
ptr::NonNull,
};
@@ -222,6 +223,19 @@ impl<T: ?Sized> Drop for Arc<T> {
}
}
+impl<T: ?Sized> From<UniqueArc<T>> for Arc<T> {
+ fn from(item: UniqueArc<T>) -> Self {
+ item.inner
+ }
+}
+
+impl<T: ?Sized> From<Pin<UniqueArc<T>>> for Arc<T> {
+ fn from(item: Pin<UniqueArc<T>>) -> Self {
+ // SAFETY: The type invariants of `Arc` guarantee that the data is pinned.
+ unsafe { Pin::into_inner_unchecked(item).inner }
+ }
+}
+
/// A borrowed reference to an [`Arc`] instance.
///
/// For cases when one doesn't ever need to increment the refcount on the allocation, it is simpler
@@ -328,3 +342,137 @@ impl<T: ?Sized> Deref for ArcBorrow<'_, T> {
unsafe { &self.inner.as_ref().data }
}
}
+
+/// A refcounted object that is known to have a refcount of 1.
+///
+/// It is mutable and can be converted to an [`Arc`] so that it can be shared.
+///
+/// # Invariants
+///
+/// `inner` always has a reference count of 1.
+///
+/// # Examples
+///
+/// In the following example, we make changes to the inner object before turning it into an
+/// `Arc<Test>` object (after which point, it cannot be mutated directly). Note that `x.into()`
+/// cannot fail.
+///
+/// ```
+/// use kernel::sync::{Arc, UniqueArc};
+///
+/// struct Example {
+/// a: u32,
+/// b: u32,
+/// }
+///
+/// fn test() -> Result<Arc<Example>> {
+/// let mut x = UniqueArc::try_new(Example { a: 10, b: 20 })?;
+/// x.a += 1;
+/// x.b += 1;
+/// Ok(x.into())
+/// }
+///
+/// # test().unwrap();
+/// ```
+///
+/// In the following example we first allocate memory for a ref-counted `Example` but we don't
+/// initialise it on allocation. We do initialise it later with a call to [`UniqueArc::write`],
+/// followed by a conversion to `Arc<Example>`. This is particularly useful when allocation happens
+/// in one context (e.g., sleepable) and initialisation in another (e.g., atomic):
+///
+/// ```
+/// use kernel::sync::{Arc, UniqueArc};
+///
+/// struct Example {
+/// a: u32,
+/// b: u32,
+/// }
+///
+/// fn test() -> Result<Arc<Example>> {
+/// let x = UniqueArc::try_new_uninit()?;
+/// Ok(x.write(Example { a: 10, b: 20 }).into())
+/// }
+///
+/// # test().unwrap();
+/// ```
+///
+/// In the last example below, the caller gets a pinned instance of `Example` while converting to
+/// `Arc<Example>`; this is useful in scenarios where one needs a pinned reference during
+/// initialisation, for example, when initialising fields that are wrapped in locks.
+///
+/// ```
+/// use kernel::sync::{Arc, UniqueArc};
+///
+/// struct Example {
+/// a: u32,
+/// b: u32,
+/// }
+///
+/// fn test() -> Result<Arc<Example>> {
+/// let mut pinned = Pin::from(UniqueArc::try_new(Example { a: 10, b: 20 })?);
+/// // We can modify `pinned` because it is `Unpin`.
+/// pinned.as_mut().a += 1;
+/// Ok(pinned.into())
+/// }
+///
+/// # test().unwrap();
+/// ```
+pub struct UniqueArc<T: ?Sized> {
+ inner: Arc<T>,
+}
+
+impl<T> UniqueArc<T> {
+ /// Tries to allocate a new [`UniqueArc`] instance.
+ pub fn try_new(value: T) -> Result<Self> {
+ Ok(Self {
+ // INVARIANT: The newly-created object has a ref-count of 1.
+ inner: Arc::try_new(value)?,
+ })
+ }
+
+ /// Tries to allocate a new [`UniqueArc`] instance whose contents are not initialised yet.
+ pub fn try_new_uninit() -> Result<UniqueArc<MaybeUninit<T>>> {
+ Ok(UniqueArc::<MaybeUninit<T>> {
+ // INVARIANT: The newly-created object has a ref-count of 1.
+ inner: Arc::try_new(MaybeUninit::uninit())?,
+ })
+ }
+}
+
+impl<T> UniqueArc<MaybeUninit<T>> {
+ /// Converts a `UniqueArc<MaybeUninit<T>>` into a `UniqueArc<T>` by writing a value into it.
+ pub fn write(mut self, value: T) -> UniqueArc<T> {
+ self.deref_mut().write(value);
+ let inner = ManuallyDrop::new(self).inner.ptr;
+ UniqueArc {
+ // SAFETY: The new `Arc` is taking over `ptr` from `self.inner` (which won't be
+ // dropped). The types are compatible because `MaybeUninit<T>` is compatible with `T`.
+ inner: unsafe { Arc::from_inner(inner.cast()) },
+ }
+ }
+}
+
+impl<T: ?Sized> From<UniqueArc<T>> for Pin<UniqueArc<T>> {
+ fn from(obj: UniqueArc<T>) -> Self {
+ // SAFETY: It is not possible to move/replace `T` inside a `Pin<UniqueArc<T>>` (unless `T`
+ // is `Unpin`), so it is ok to convert it to `Pin<UniqueArc<T>>`.
+ unsafe { Pin::new_unchecked(obj) }
+ }
+}
+
+impl<T: ?Sized> Deref for UniqueArc<T> {
+ type Target = T;
+
+ fn deref(&self) -> &Self::Target {
+ self.inner.deref()
+ }
+}
+
+impl<T: ?Sized> DerefMut for UniqueArc<T> {
+ fn deref_mut(&mut self) -> &mut Self::Target {
+ // SAFETY: By the `Arc` type invariant, there is necessarily a reference to the object, so
+ // it is safe to dereference it. Additionally, we know there is only one reference when
+ // it's inside a `UniqueArc`, so it is safe to get a mutable reference.
+ unsafe { &mut self.inner.ptr.as_mut().data }
+ }
+}