Re: [PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350

[Johan Hovold]

Luca, Vinod,

On Wed, Nov 30, 2022 at 09:14:28AM +0100, Luca Weiss wrote:
> Add the tables and config for the combo phy found on SM6350.
> 
> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> ---
> Changes since v2:
> * Drop dp_txa/dp_txb changes, not required
> * Fix dp_dp_phy offset
> 
>  drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 126 ++++++++++++++++++++++
>  1 file changed, 126 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 77052c66cf70..6ac0c68269dc 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c

> @@ -975,6 +1039,19 @@ static const char * const sc7180_usb3phy_reset_l[] = {
>  	"phy",
>  };
>  
> +static const struct qmp_combo_offsets qmp_combo_offsets_v3 = {
> +	.com		= 0x0000,
> +	.txa		= 0x1200,
> +	.rxa		= 0x1400,
> +	.txb		= 0x1600,
> +	.rxb		= 0x1800,
> +	.usb3_serdes	= 0x1000,
> +	.usb3_pcs_misc	= 0x1a00,
> +	.usb3_pcs	= 0x1c00,
> +	.dp_serdes	= 0x1000,

I would have expected this to be 0x2000 as that's what the older
platforms have been using for the dp serdes table so far. Without access
to any documentation it's hard to tell whether everyone's just been
cargo-culting all along or if there's actually something there at offset
0x2000.

Vinod, could you shed some light on this as presumably you have access
to some documentation?

> +	.dp_dp_phy	= 0x2a00,
> +};

Johan