Re: [PATCH RESEND v2 1/2] media: uvcvideo: Limit power line control for Acer EasyCamera

[Laurent Pinchart]

Hi Ricardo,

Thank you for the patch.

On Fri, Dec 02, 2022 at 05:45:06PM +0100, Ricardo Ribalda wrote:
> The device does not implement the power line control correctly. Add a
> corresponding control mapping override.
> 
> Bus 003 Device 002: ID 5986:1180 Acer, Inc EasyCamera
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               2.00
>   bDeviceClass          239 Miscellaneous Device
>   bDeviceSubClass         2
>   bDeviceProtocol         1 Interface Association
>   bMaxPacketSize0        64
>   idVendor           0x5986 Acer, Inc
>   idProduct          0x1180
>   bcdDevice           56.04
>   iManufacturer           3 Bison
>   iProduct                1 EasyCamera
>   iSerial                 2
>   bNumConfigurations      1

If you have the full descriptors for this device, could you send them to
me ?

> Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
> Reviewed-by: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> ---
>  drivers/media/usb/uvc/uvc_driver.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
> index 215fb483efb0..cca3012c8912 100644
> --- a/drivers/media/usb/uvc/uvc_driver.c
> +++ b/drivers/media/usb/uvc/uvc_driver.c
> @@ -2994,6 +2994,15 @@ static const struct usb_device_id uvc_ids[] = {
>  	  .bInterfaceSubClass	= 1,
>  	  .bInterfaceProtocol	= 0,
>  	  .driver_info		= (kernel_ulong_t)&uvc_ctrl_power_line_limited },
> +	/* Acer EasyCamera */
> +	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
> +				| USB_DEVICE_ID_MATCH_INT_INFO,
> +	  .idVendor		= 0x5986,
> +	  .idProduct		= 0x1180,
> +	  .bInterfaceClass	= USB_CLASS_VIDEO,
> +	  .bInterfaceSubClass	= 1,
> +	  .bInterfaceProtocol	= 0,
> +	  .driver_info		= (kernel_ulong_t)&uvc_ctrl_power_line_limited },
>  	/* Intel RealSense D4M */
>  	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
>  				| USB_DEVICE_ID_MATCH_INT_INFO,
> 

-- 
Regards,

Laurent Pinchart