Re: [PATCH V8 5/5] ASoC: dt-bindings: Add schema for "awinic,aw883xx"

[Krzysztof Kozlowski]

On 30/12/2022 10:34, wangweidong.a@xxxxxxxxxx wrote:
> From: Weidong Wang <wangweidong.a@xxxxxxxxxx>
> 
> Add a DT schema for describing Awinic AW883xx audio amplifiers. They are
> controlled using I2C.
> 
> Signed-off-by: Weidong Wang <wangweidong.a@xxxxxxxxxx>
> ---
>  .../bindings/sound/awinic,aw883xx.yaml        | 49 +++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/awinic,aw883xx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/awinic,aw883xx.yaml b/Documentation/devicetree/bindings/sound/awinic,aw883xx.yaml
> new file mode 100644
> index 000000000000..b677427ebcd1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/awinic,aw883xx.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/awinic,aw883xx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Awinic AW883xx Smart Audio Amplifier
> +
> +maintainers:
> +  - Stephan Weidong Wang <wangweidong.a@xxxxxxxxxx>
> +
> +description:
> +  The Awinic AW883XX is an I2S/TDM input, high efficiency
> +  digital Smart K audio amplifier with an integrated 10.25V
> +  smart boost convert.
> +
> +allOf:
> +  - $ref: dai-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: awinic,aw883xx

Now the question what does "xx" stand for? I cannot find such product on
awinic website:
https://www.awinic.com/En/Index/queryAll/wd/aw883xx.html

> +
> +  reg:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +

Why there is no sound-dai-cells?


> +  sound-name-prefix: true

Drop it.

> +
> +required:
> +  - compatible
> +  - reg
> +  - reset-gpios
> +
> +additionalProperties: false

Instead:
unevaluatedProperties: false

unless this is not a codec and sound-dai-cells cannot be used?

> +
> +examples:
> +  - |
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        audio-codec@34 {
> +            compatible = "awinic,aw883xx";
> +            reg = <0x34>;
> +            reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;

Does not look like you tested the bindings. Please run `make
dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).

Best regards,
Krzysztof