[PATCH v2 2/2] remoteproc: k3-c7x: Add support for C7xv DSP on AM62A SoC

[Hari Nagalla]

From: Jai Luthra <j-luthra@xxxxxx>

Add support to the K3 DSP remoteproc driver to configure the C7xv
subsystem core on AM62A SoCs. The C7xv susbsytem is based on C71 DSP
with anlytics engine for deep learning purposes. The remoteproc
handling for device management is similar to the C66/C71 DSPs on K3
J7 family SoCs, even though there are additional hardware accelerators
and IP updates to C7xv subsystem.

Signed-off-by: Jai Luthra <j-luthra@xxxxxx>
Signed-off-by: Hari Nagalla <hnagalla@xxxxxx>
-----
V2: Correct original author and order of Signed-off-by
---
 drivers/remoteproc/ti_k3_dsp_remoteproc.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
index eb9c64f7b9b4..ec626a37fef6 100644
--- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
@@ -870,6 +870,10 @@ static const struct k3_dsp_mem_data c71_mems[] = {
 	{ .name = "l1dram", .dev_addr = 0xe00000 },
 };
 
+static const struct k3_dsp_mem_data c7xv_mems[] = {
+	{ .name = "l2sram", .dev_addr = 0x800000 },
+};
+
 static const struct k3_dsp_dev_data c66_data = {
 	.mems = c66_mems,
 	.num_mems = ARRAY_SIZE(c66_mems),
@@ -884,10 +888,18 @@ static const struct k3_dsp_dev_data c71_data = {
 	.uses_lreset = false,
 };
 
+static const struct k3_dsp_dev_data c7xv_data = {
+	.mems = c7xv_mems,
+	.num_mems = ARRAY_SIZE(c7xv_mems),
+	.boot_align_addr = SZ_2M,
+	.uses_lreset = false,
+};
+
 static const struct of_device_id k3_dsp_of_match[] = {
 	{ .compatible = "ti,j721e-c66-dsp", .data = &c66_data, },
 	{ .compatible = "ti,j721e-c71-dsp", .data = &c71_data, },
 	{ .compatible = "ti,j721s2-c71-dsp", .data = &c71_data, },
+	{ .compatible = "ti,am62a-c7xv-dsp", .data = &c7xv_data, },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, k3_dsp_of_match);
-- 
2.17.1