Re: [PATCH] drm/bridge: sii902x: Allow reset line to be tied to a sleepy GPIO controller

[Andrzej Hajda]

On 28.12.2022 15:57, Wadim Egorov wrote:
> Switch to gpiod_set_value_cansleep() in sii902x_reset().
> This is relevant if the reset line is tied to a I2C GPIO
> controller.
>
> Signed-off-by: Wadim Egorov <w.egorov@xxxxxxxxx>
Reviewed-by: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>

Regards
Andrzej
> ---
>   drivers/gpu/drm/bridge/sii902x.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
> index 878fb7d3732b..980611aec2f6 100644
> --- a/drivers/gpu/drm/bridge/sii902x.c
> +++ b/drivers/gpu/drm/bridge/sii902x.c
> @@ -240,12 +240,12 @@ static void sii902x_reset(struct sii902x *sii902x)
>   	if (!sii902x->reset_gpio)
>   		return;
>   
> -	gpiod_set_value(sii902x->reset_gpio, 1);
> +	gpiod_set_value_cansleep(sii902x->reset_gpio, 1);
>   
>   	/* The datasheet says treset-min = 100us. Make it 150us to be sure. */
>   	usleep_range(150, 200);
>   
> -	gpiod_set_value(sii902x->reset_gpio, 0);
> +	gpiod_set_value_cansleep(sii902x->reset_gpio, 0);
>   }
>   
>   static enum drm_connector_status sii902x_detect(struct sii902x *sii902x)