[PATCH 14/18] arm64: dts: qcom: sc7280: Pad addresses to 8 hex digits

[Konrad Dybcio]

Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 46 ++++++++++++++--------------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 0adf13399e64..cbf571baca9b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2171,9 +2171,9 @@ ipa: ipa@1e40000 {
 
 			iommus = <&apps_smmu 0x480 0x0>,
 				 <&apps_smmu 0x482 0x0>;
-			reg = <0 0x1e40000 0 0x8000>,
-			      <0 0x1e50000 0 0x4ad0>,
-			      <0 0x1e04000 0 0x23000>;
+			reg = <0 0x01e40000 0 0x8000>,
+			      <0 0x01e50000 0 0x4ad0>,
+			      <0 0x01e04000 0 0x23000>;
 			reg-names = "ipa-reg",
 				    "ipa-shared",
 				    "gsi";
@@ -2455,7 +2455,7 @@ lpass_cpu: audio@3987000 {
 
 		lpass_hm: clock-controller@3c00000 {
 			compatible = "qcom,sc7280-lpasshm";
-			reg = <0 0x3c00000 0 0x28>;
+			reg = <0 0x03c00000 0 0x28>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "bi_tcxo";
 			#clock-cells = <1>;
@@ -3489,7 +3489,7 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
 
 		pmu@9091000 {
 			compatible = "qcom,sc7280-llcc-bwmon";
-			reg = <0 0x9091000 0 0x1000>;
+			reg = <0 0x09091000 0 0x1000>;
 
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -3571,7 +3571,7 @@ dc_noc: interconnect@90e0000 {
 		};
 
 		gem_noc: interconnect@9100000 {
-			reg = <0 0x9100000 0 0xe2200>;
+			reg = <0 0x09100000 0 0xe2200>;
 			compatible = "qcom,sc7280-gem-noc";
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
@@ -3586,8 +3586,8 @@ system-cache-controller@9200000 {
 
 		eud: eud@88e0000 {
 			compatible = "qcom,sc7280-eud","qcom,eud";
-			reg = <0 0x88e0000 0 0x2000>,
-			      <0 0x88e2000 0 0x1000>;
+			reg = <0 0x088e0000 0 0x2000>,
+			      <0 0x088e2000 0 0x1000>;
 			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
 			ports {
 				port@0 {
@@ -3750,7 +3750,7 @@ opp-460000048 {
 
 		videocc: clock-controller@aaf0000 {
 			compatible = "qcom,sc7280-videocc";
-			reg = <0 0xaaf0000 0 0x10000>;
+			reg = <0 0x0aaf0000 0 0x10000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				<&rpmhcc RPMH_CXO_CLK_A>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao";
@@ -3773,7 +3773,7 @@ camcc: clock-controller@ad00000 {
 
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sc7280-dispcc";
-			reg = <0 0xaf00000 0 0x20000>;
+			reg = <0 0x0af00000 0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&mdss_dsi_phy 0>,
@@ -4001,10 +4001,10 @@ mdss_edp: edp@aea0000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&edp_hot_plug_det>;
 
-				reg = <0 0xaea0000 0 0x200>,
-				      <0 0xaea0200 0 0x200>,
-				      <0 0xaea0400 0 0xc00>,
-				      <0 0xaea1000 0 0x400>;
+				reg = <0 0x0aea0000 0 0x200>,
+				      <0 0x0aea0200 0 0x200>,
+				      <0 0x0aea0400 0 0xc00>,
+				      <0 0x0aea1000 0 0x400>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <14>;
@@ -4076,10 +4076,10 @@ opp-810000000 {
 			mdss_edp_phy: phy@aec2a00 {
 				compatible = "qcom,sc7280-edp-phy";
 
-				reg = <0 0xaec2a00 0 0x19c>,
-				      <0 0xaec2200 0 0xa0>,
-				      <0 0xaec2600 0 0xa0>,
-				      <0 0xaec2000 0 0x1c0>;
+				reg = <0 0x0aec2a00 0 0x19c>,
+				      <0 0x0aec2200 0 0xa0>,
+				      <0 0x0aec2600 0 0xa0>,
+				      <0 0x0aec2000 0 0x1c0>;
 
 				clocks = <&rpmhcc RPMH_CXO_CLK>,
 					 <&gcc GCC_EDP_CLKREF_EN>;
@@ -4095,11 +4095,11 @@ mdss_edp_phy: phy@aec2a00 {
 			mdss_dp: displayport-controller@ae90000 {
 				compatible = "qcom,sc7280-dp";
 
-				reg = <0 0xae90000 0 0x200>,
-				      <0 0xae90200 0 0x200>,
-				      <0 0xae90400 0 0xc00>,
-				      <0 0xae91000 0 0x400>,
-				      <0 0xae91400 0 0x400>;
+				reg = <0 0x0ae90000 0 0x200>,
+				      <0 0x0ae90200 0 0x200>,
+				      <0 0x0ae90400 0 0xc00>,
+				      <0 0x0ae91000 0 0x400>,
+				      <0 0x0ae91400 0 0x400>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <12>;
-- 
2.39.0