Re: [PATCH v2 2/5] iio: pressure: bmp280: Add preinit callback
From: Angel Iglesias
Date: Sun Jan 01 2023 - 06:09:38 EST
On Fri, 2022-12-30 at 18:18 +0000, Jonathan Cameron wrote:
> On Mon, 26 Dec 2022 15:29:21 +0100
> Angel Iglesias <ang.iglesiasg@xxxxxxxxx> wrote:
>
> > Adds preinit callback to execute operations on probe before applying
> > initial configuration.
> >
> > Signed-off-by: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
> >
> > diff --git a/drivers/iio/pressure/bmp280-core.c
> > b/drivers/iio/pressure/bmp280-core.c
> > index 46959a91408f..c37cf2caec68 100644
> > --- a/drivers/iio/pressure/bmp280-core.c
> > +++ b/drivers/iio/pressure/bmp280-core.c
> > @@ -217,6 +217,7 @@ struct bmp280_chip_info {
> > int (*read_press)(struct bmp280_data *, int *, int *);
> > int (*read_humid)(struct bmp280_data *, int *, int *);
> > int (*read_calib)(struct bmp280_data *);
> > + int (*preinit)(struct bmp280_data *);
> > };
> >
> > /*
> > @@ -935,6 +936,7 @@ static const struct bmp280_chip_info bmp280_chip_info =
> > {
> > .read_temp = bmp280_read_temp,
> > .read_press = bmp280_read_press,
> > .read_calib = bmp280_read_calib,
> > + .preinit = NULL,
> C standard guarantees those are set to NULL anyway + the default is obvious.
> Hence don't set them to NULL, just leave the automatic initialization of
> unspecified structure elements to handle it for you.
OK! Note to self: compiler knows best!
> > };
> >
> > static int bme280_chip_config(struct bmp280_data *data)
> > @@ -979,6 +981,7 @@ static const struct bmp280_chip_info bme280_chip_info =
> > {
> > .read_press = bmp280_read_press,
> > .read_humid = bmp280_read_humid,
> > .read_calib = bme280_read_calib,
> > + .preinit = NULL,
> > };
> >
> > /*
> > @@ -1220,6 +1223,12 @@ static const int bmp380_odr_table[][2] = {
> > [BMP380_ODR_0_0015HZ] = {0, 1526},
> > };
> >
> > +static int bmp380_preinit(struct bmp280_data *data)
> > +{
> > + /* BMP3xx requires soft-reset as part of initialization */
> > + return bmp380_cmd(data, BMP380_CMD_SOFT_RESET);
> > +}
> > +
> > static int bmp380_chip_config(struct bmp280_data *data)
> > {
> > bool change = false, aux;
> > @@ -1349,6 +1358,7 @@ static const struct bmp280_chip_info bmp380_chip_info
> > = {
> > .read_temp = bmp380_read_temp,
> > .read_press = bmp380_read_press,
> > .read_calib = bmp380_read_calib,
> > + .preinit = bmp380_preinit,
> > };
> >
> > static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
> > @@ -1604,6 +1614,7 @@ static const struct bmp280_chip_info bmp180_chip_info
> > = {
> > .read_temp = bmp180_read_temp,
> > .read_press = bmp180_read_press,
> > .read_calib = bmp180_read_calib,
> > + .preinit = NULL,
> > };
> >
> > static irqreturn_t bmp085_eoc_irq(int irq, void *d)
> > @@ -1762,9 +1773,13 @@ int bmp280_common_probe(struct device *dev,
> > return -EINVAL;
> > }
> >
> > - /* BMP3xx requires soft-reset as part of initialization */
> > - if (chip_id == BMP380_CHIP_ID) {
> > - ret = bmp380_cmd(data, BMP380_CMD_SOFT_RESET);
> > + /*
> > + * Some chips like the BMP3xx have preinit tasks to run
> > + * before applying the initial configuration.
> > + */
> I would drop this comment. It's kind of obvious that some devices need you
> to call something here - otherwise why have the clearly optional callback?
> The specific BMP3xx requirements are well commented in your new callback above
> so don't want to be here as well.
>
> > + if (data->chip_info->preinit) {
> > + ret = data->chip_info->preinit(data);
> > + dev_err(dev, "error running preinit tasks");
>
> Error message printed on success...
Yup, sorry about that...
>
> > if (ret < 0)
> > return ret;
>
> return dev_err_probe(dev, ret, "error running preinit
> tasks");
>
> > }
>
Thanks for your time!
Angel