[PATCH v2 0/2] firmware/psci: Switch to the sys-off handler API

[Samuel Holland]

I want to convert the axp20x PMIC poweroff handler to use the sys-off
API, so it can be used as a fallback for the SBI poweroff handler on
RISC-V. But the PSCI poweroff handler still uses pm_power_off, so done
alone, this conversion would cause the axp20x callback to be called
first, before the PSCI poweroff handler.

In order to prevent this change in behavior, the PSCI poweroff handler
needs to be converted to the sys-off API first, at a higher priority.

This series performs the conversion, after accounting for the fact that
the PSCI poweroff handler is registered quite early during boot.

The first patch is a dependency for both this series and the SBI
series[1], so I would like to get at least patch 1 merged soon.

[1]: https://lore.kernel.org/lkml/20221228161915.13194-1-samuel@xxxxxxxxxxxx/

Changes in v2:
 - Update commit messages

Samuel Holland (2):
  kernel/reboot: Use the static sys-off handler for any priority
  firmware/psci: Switch to the sys-off handler API

 drivers/firmware/psci/psci.c |  9 ++++++---
 kernel/reboot.c              | 10 ++++------
 2 files changed, 10 insertions(+), 9 deletions(-)

-- 
2.37.4