Re: [PATCH] mmc: sunxi-mmc: Fix clock refcount imbalance during unbind

[Samuel Holland]

On 8/15/22 05:11, Ulf Hansson wrote:
> On Wed, 10 Aug 2022 at 04:25, Samuel Holland <samuel@xxxxxxxxxxxx> wrote:
>>
>> If the controller is suspended by runtime PM, the clock is already
>> disabled, so do not try to disable it again during removal. Use
>> pm_runtime_disable() to flush any pending runtime PM transitions.
>>
>> Fixes: 9a8e1e8cc2c0 ("mmc: sunxi: Add runtime_pm support")
>> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
>> ---
>>
>>  drivers/mmc/host/sunxi-mmc.c | 8 +++++---
>>  1 file changed, 5 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
>> index b16e12e62e72..3db9f32d6a7b 100644
>> --- a/drivers/mmc/host/sunxi-mmc.c
>> +++ b/drivers/mmc/host/sunxi-mmc.c
>> @@ -1492,9 +1492,11 @@ static int sunxi_mmc_remove(struct platform_device *pdev)
>>         struct sunxi_mmc_host *host = mmc_priv(mmc);
>>
>>         mmc_remove_host(mmc);
>> -       pm_runtime_force_suspend(&pdev->dev);
>> -       disable_irq(host->irq);
>> -       sunxi_mmc_disable(host);
> 
> Perhaps a better option than the below, would just be to drop the
> above calls to disable_irq() and sunxi_mmc_disable(), as that is
> already managed through the call to pm_runtime_force_suspend().

I like the idea, but it will not work for !CONFIG_PM builds, which this
driver currently supports.

Regards,
Samuel

>> +       pm_runtime_disable(&pdev->dev);
>> +       if (!pm_runtime_status_suspended(&pdev->dev)) {
>> +               disable_irq(host->irq);
>> +               sunxi_mmc_disable(host);
>> +       }
>>         dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
>>         mmc_free_host(mmc);
>>
> 
> Kind regards
> Uffe