[PATCH v3 2/3] dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties

[Manivannan Sadhasivam]

The Qcom PCIe controller is capable of using either internal MSI controller
or the external GIC-ITS for signaling MSIs sent by endpoint devices.
Currently, the binding only documents the internal MSI implementation.

Let's document the GIC-ITS imeplementation by making use of msi-map and
msi-map-mask properties. Only one of the implementation should be used
at a time.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/pci/qcom,pcie.yaml | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index a3639920fcbb..01208450e05c 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -114,14 +114,20 @@ required:
   - compatible
   - reg
   - reg-names
-  - interrupts
-  - interrupt-names
-  - "#interrupt-cells"
   - interrupt-map-mask
   - interrupt-map
   - clocks
   - clock-names
 
+oneOf:
+  - required:
+      - interrupts
+      - interrupt-names
+      - "#interrupt-cells"
+  - required:
+      - msi-map
+      - msi-map-mask
+
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
   - if:
-- 
2.25.1