[PATCH] spi: pl022: Only use DT-specified DMA channels

[Vincent Whitchurch]

When a platform is booted with devicetree and does not provide a
platform data structure, the driver creates one internally.  enable_dma
should not be set in this structure when creating it; the probe function
will set it later if DMA channels are specified via the devicetree.

Setting enable_dma = 1 when creating this internal platform data can
lead to pl022_dma_probe() finding bogus DMA channels (since there is no
channel filter specified) when no DMA channels are specified in the
devicetree.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
---
 drivers/spi/spi-pl022.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index e4484ace584e..a17ff839117f 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -2091,7 +2091,6 @@ pl022_platform_data_dt_get(struct device *dev)
 		return NULL;
 
 	pd->bus_id = -1;
-	pd->enable_dma = 1;
 	of_property_read_u32(np, "pl022,autosuspend-delay",
 			     &pd->autosuspend_delay);
 	pd->rt = of_property_read_bool(np, "pl022,rt");
-- 
2.34.1