Re: [PATCH 4/4] arm64: dts: ti: k3-am62a7-sk: Enable USB1 node

[Dhruva Gole]

On 03/01/23 09:51, Vignesh Raghavendra wrote:
> Enable USB1 host port on AM62A7 SK.
>
> Co-developed-by: Bryan Brattlof <bb@xxxxxx>
> Signed-off-by: Bryan Brattlof <bb@xxxxxx>
> Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
> ---

For the series,

Acked-by: Dhruva Gole <d-gole@xxxxxx>

>   arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 16 ++++++++++++++++
>   1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> index bdc363fcbb4b..5c9012141ee2 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> @@ -160,6 +160,12 @@ AM62AX_IOPAD(0x244, PIN_OUTPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */
>   		>;
>   	};
>   
> +	main_usb1_pins_default: main-usb1-pins-default {
> +		pinctrl-single,pins = <
> +			AM62AX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */
> +		>;
> +	};
> +
>   	main_mdio1_pins_default: main-mdio1-pins-default {
>   		pinctrl-single,pins = <
>   			AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */
> @@ -247,6 +253,16 @@ &main_uart0 {
>   	pinctrl-0 = <&main_uart0_pins_default>;
>   };
>   
> +&usbss1 {
> +	status = "okay";
> +};
> +
> +&usb1 {
> +	dr_mode = "host";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&main_usb1_pins_default>;
> +};
> +
>   &cpsw3g {
>   	status = "okay";
>   	pinctrl-names = "default";

--
Thanks and Regards,
Dhruva Gole