Re: [PATCH v2 2/4] mfd: Add RZ/V2M PWC core driver

[Lee Jones]

On Tue, 03 Jan 2023, Fabrizio Castro wrote:

> Hi Geert,
> 
> Thanks for your feedback!
> 
> > -----Original Message-----
> > From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> > Sent: 03 January 2023 08:37
> > To: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
> > Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>; Bartosz Golaszewski
> > <brgl@xxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; Krzysztof Kozlowski
> > <krzysztof.kozlowski+dt@xxxxxxxxxx>; Sebastian Reichel <sre@xxxxxxxxxx>;
> > Geert Uytterhoeven <geert+renesas@xxxxxxxxx>; Lee Jones <lee@xxxxxxxxxx>;
> > linux-gpio@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> > kernel@xxxxxxxxxxxxxxx; linux-pm@xxxxxxxxxxxxxxx; Chris Paterson
> > <Chris.Paterson2@xxxxxxxxxxx>; Biju Das <biju.das@xxxxxxxxxxxxxx>; linux-
> > renesas-soc@xxxxxxxxxxxxxxx; Laurent Pinchart
> > <laurent.pinchart@xxxxxxxxxxxxxxxx>; Jacopo Mondi <jacopo@xxxxxxxxxx>
> > Subject: Re: [PATCH v2 2/4] mfd: Add RZ/V2M PWC core driver
> > 
> > Hi Fabrizio,
> > 
> > On Wed, Dec 21, 2022 at 10:09 PM Fabrizio Castro
> > <fabrizio.castro.jz@xxxxxxxxxxx> wrote:
> > > The External Power Sequence Controller (PWC) IP (found in the
> > > RZ/V2M SoC) is a controller for external power supplies (regulators
> > > and power switches), and it supports the following features: it
> > > generates a power on/off sequence for external power supplies,
> > > it generates an on/off sequence for the LPDDR4 core power supply
> > > (LPVDD), it comes with General-Purpose Outputs, and it processes
> > > key input signals.
> > 
> > Thanks for your patch!
> > 
> > > The PWC is basically a Multi-Function Device (MFD), its software
> > > support comes with a core driver, and specialized drivers for
> > > its specific features.
> > 
> > I have to admit I'm not such a big fan of MFD.  In this driver,
> > you are not even sharing resources in the MFD cells, just the mapped
> > register base.  So I think you can easily save +100 LoC and reduce
> > maintenance synchronization overhead across subsystems by just having
> > a single non-MFD driver instead.
> > 
> > Did you pick MFD because the PWC poweroff feature depends on board
> > wiring, and thus is optional?
> 
> I am not a big fan of MFD, either.

Interesting.

Could you both elaborate further please?

> I picked MFD because we were not 100% sure of what the IP could do
> when we started working on it.
> I have received more information regarding the IP now (which I don't
> have the liberty to discuss), I am still not 100% sure that's all
> of it, but basically its support may require expansion later on.
> 
> I liked the solution based on syscon and simple-mfd for several reasons,
> but having dropped syscon and simple-mfd due to issues with the dt-bindings
> I have moved on with a core driver to instantiate the required SW support.
> We could of course move to a unified driver if that makes more sense?
> If we were to move to unified driver, under which directory would you
> suggest we put it?

If you do not have any resources to share, you can simply register each
of the devices via Device Tree.  I do not see a valid reason to force a
parent / child relationship for your use-case.

Many people attempt to use MFD as a dumping ground / workaround for a
bunch of reasons.  Some valid, others not so much.

-- 
Lee Jones [李琼斯]