Hi Robert
On Sun, Dec 25, 2022 at 04:42:34PM +0100, Robert Mader wrote:
Analogous to e.g. the imx219. This enables propagatingMight be nicer to move this one line up
V4L2_CID_CAMERA_SENSOR_ROTATION values so that libcamera
can detect the correct rotation from the device tree
and propagate it further to e.g. Pipewire.
Signed-off-by: Robert Mader <robert.mader@xxxxxxxxxxxxx>
---
drivers/media/i2c/imx258.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
index eab5fc1ee2f7..85819043d1e3 100644
--- a/drivers/media/i2c/imx258.c
+++ b/drivers/media/i2c/imx258.c
@@ -9,6 +9,7 @@
#include <linux/pm_runtime.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
#include <asm/unaligned.h>
#define IMX258_REG_VALUE_08BIT 1
@@ -1149,6 +1150,7 @@ static int imx258_init_controls(struct imx258 *imx258)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd);
struct v4l2_ctrl_handler *ctrl_hdlr;
+ struct v4l2_fwnode_device_properties props;
s64 vblank_def;I count 9 controls being registered before this patch, not 8. Do I
s64 vblank_min;
s64 pixel_rate_min;
@@ -1156,7 +1158,7 @@ static int imx258_init_controls(struct imx258 *imx258)
int ret;
ctrl_hdlr = &imx258->ctrl_handler;
- ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
+ ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10);
count them right ?
If that's case, as v4l2_ctrl_new_fwnode_properties()
can register up to two controls (V4L2_CID_ROTATION and
V4L2_CID_ORIENTATION) I would pre-reserve 11 controls not 10 to avoid
relocations.
Thanks!if (ret)The rest looks good to me!
return ret;
@@ -1232,6 +1234,15 @@ static int imx258_init_controls(struct imx258 *imx258)
goto error;
}
+ ret = v4l2_fwnode_device_parse(&client->dev, &props);
+ if (ret)
+ goto error;
+
+ ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx258_ctrl_ops,
+ &props);
+ if (ret)
+ goto error;
+
Thanks
j