[PATCH] spi: spi-loopback-test: Allow skipping delays

[Vincent Whitchurch]

A 100 ms delay is inserted between tests by default in order to "detect
the individual tests when using a logic analyzer".  However, such delays
are unnecessary when using this module for automated regression testing,
so allow them to be disabled with a module parameter.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
---
 drivers/spi/spi-loopback-test.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c
index dd7de8fa37d0..313106eb8d40 100644
--- a/drivers/spi/spi-loopback-test.c
+++ b/drivers/spi/spi-loopback-test.c
@@ -71,6 +71,11 @@ module_param(check_ranges, int, 0644);
 MODULE_PARM_DESC(check_ranges,
 		 "checks rx_buffer pattern are valid");
 
+static unsigned int delay_ms = 100;
+module_param(delay_ms, uint, 0644);
+MODULE_PARM_DESC(delay_ms,
+		 "delay between tests, in milliseconds (default: 100)");
+
 /* the actual tests to execute */
 static struct spi_test spi_tests[] = {
 	{
@@ -1098,7 +1103,8 @@ int spi_test_run_tests(struct spi_device *spi,
 		 * detect the individual tests when using a logic analyzer
 		 * we also add scheduling to avoid potential spi_timeouts...
 		 */
-		mdelay(100);
+		if (delay_ms)
+			mdelay(delay_ms);
 		schedule();
 	}
 
-- 
2.34.1