Re: [PATCH RESEND v6 1/5] hwmon: (pmbus/core): Add interrupt support

From: Guenter Roeck
Date: Tue Jan 03 2023 - 12:40:19 EST

Next message: Vladimir Oltean: "Re: [Patch net-next v6 09/13] net: dsa: microchip: ptp: move pdelay_rsp correction field to tail tag"
Previous message: Vipin Sharma: "Re: [Patch v3 1/9] KVM: x86/mmu: Repurpose KVM MMU shrinker to purge shadow page caches"
In reply to: Naresh Solanki: "Re: [PATCH RESEND v6 1/5] hwmon: (pmbus/core): Add interrupt support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, Jan 03, 2023 at 08:56:59PM +0530, Naresh Solanki wrote:
> Hi Guenter
>
> On 03-01-2023 05:56 pm, Guenter Roeck wrote:
> > On Tue, Jan 03, 2023 at 12:18:49PM +0530, Naresh Solanki wrote:
> > > Hi Guenter,
> > >
> > > On 29-12-2022 08:10 pm, Guenter Roeck wrote:
> > > > On Wed, Dec 14, 2022 at 09:07:11AM +0100, Naresh Solanki wrote:
> > > > > From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
> > > > >
> > > > > Implement PMBUS irq handler.
> > > > >
> > > > > Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
> > > > > Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx>
> > > >
> > > > $ scripts/checkpatch.pl --strict index.html
> > > > CHECK: Blank lines aren't necessary after an open brace '{'
> > > > #131: FILE: drivers/hwmon/pmbus/pmbus_core.c:3088:
> > > > + for (i = 0; i < data->info->pages; i++) {
> > > > +
> > > >
> > > > CHECK: Alignment should match open parenthesis
> > > > #183: FILE: drivers/hwmon/pmbus/pmbus_core.c:3140:
> > > > + ret = devm_request_threaded_irq(dev, client->irq, NULL, pmbus_fault_handler,
> > > > + 0, "pmbus-irq", data);
> > > >
> > > > CHECK: Please use a blank line after function/struct/union/enum declarations
> > > > #197: FILE: drivers/hwmon/pmbus/pmbus_core.c:3154:
> > > > }
> > > > +static int pmbus_irq_setup(struct i2c_client *client, struct pmbus_data *data)
> > > >
> > > > total: 0 errors, 0 warnings, 3 checks, 109 lines checked
> > > >
> > > > NOTE: For some of the reported defects, checkpatch may be able to
> > > > mechanically convert to the typical style using --fix or --fix-inplace.
> > > >
> > > > index.html has style problems, please review.
> > > >
> > > > Please run checkpatch --strict on your patches.
> > > > Also see Documentation/hwmon/submitting-patches.rst.
> > > I will take care of these errors in the updated version.
> > > >
> > > > > ---
> > > > > drivers/hwmon/pmbus/pmbus.h | 2 +-
> > > > > drivers/hwmon/pmbus/pmbus_core.c | 84 ++++++++++++++++++++++++++++++++
> > > > > 2 files changed, 85 insertions(+), 1 deletion(-)
> > > > >
> > > > >
> > > > > base-commit: 364ffd2537c44cb6914ff5669153f4a86fffad29
> > > > >
> > > > > diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
> > > > > index 10fb17879f8e..6b2e6cf93b19 100644
> > > > > --- a/drivers/hwmon/pmbus/pmbus.h
> > > > > +++ b/drivers/hwmon/pmbus/pmbus.h
> > > > > @@ -26,7 +26,7 @@ enum pmbus_regs {
> > > > > PMBUS_CAPABILITY = 0x19,
> > > > > PMBUS_QUERY = 0x1A,
> > > > > -
> > > > > + PMBUS_SMBALERT_MASK = 0x1B,
> > > > > PMBUS_VOUT_MODE = 0x20,
> > > > > PMBUS_VOUT_COMMAND = 0x21,
> > > > > PMBUS_VOUT_TRIM = 0x22,
> > > > > diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
> > > > > index 95e95783972a..244fd2597252 100644
> > > > > --- a/drivers/hwmon/pmbus/pmbus_core.c
> > > > > +++ b/drivers/hwmon/pmbus/pmbus_core.c
> > > > > @@ -3072,11 +3072,89 @@ static int pmbus_regulator_register(struct pmbus_data *data)
> > > > > return 0;
> > > > > }
> > > > > +
> > > > > +static int pmbus_write_smbalert_mask(struct i2c_client *client, u8 page, u8 reg, u8 val)
> > > > > +{
> > > > > + return pmbus_write_word_data(client, page, PMBUS_SMBALERT_MASK, reg | (val << 8));
> > > > > +}
> > > > > +
> > > > > +static irqreturn_t pmbus_fault_handler(int irq, void *pdata)
> > > > > +{
> > > > > + struct pmbus_data *data = pdata;
> > > > > + struct i2c_client *client = to_i2c_client(data->dev);
> > > > > + int i, status;
> > > > > +
> > > > > + for (i = 0; i < data->info->pages; i++) {
> > > > > +
> > > > > + mutex_lock(&data->update_lock);
> > > > > + status = pmbus_read_status_word(client, i);
> > > > > + if (status < 0) {
> > > > > + mutex_unlock(&data->update_lock);
> > > > > + return status;
> > > > > + }
> > > > > +
> > > > > + if (status & ~(PB_STATUS_OFF | PB_STATUS_BUSY | PB_STATUS_POWER_GOOD_N))
> > > > > + pmbus_clear_fault_page(client, i);
> > > > > +
> > > > > + mutex_unlock(&data->update_lock);
> > > > > + }
> > > > > +
> > > > > + return IRQ_HANDLED;
> > > > > +}
> > > > > +
> > > > > +static int pmbus_irq_setup(struct i2c_client *client, struct pmbus_data *data)
> > > > > +{
> > > > > + struct device *dev = &client->dev;
> > > > > + const struct pmbus_regulator_status_category *cat;
> > > > > + const struct pmbus_regulator_status_assoc *bit;
> > > > > + int i, j, err, ret, func;
> > > > > + u8 mask;
> > > > > +
> > > > > + for (i = 0; i < data->info->pages; i++) {
> > > > > + func = data->info->func[i];
> > > > > +
> > > > > + for (j = 0; j < ARRAY_SIZE(pmbus_regulator_flag_map); j++) {
> > > > > + cat = &pmbus_regulator_flag_map[j];
> > > > > + if (!(func & cat->func))
> > > > > + continue;
> > > > > + mask = 0;
> > > > > + for (bit = cat->bits; bit->pflag; bit++)
> > > > > + mask |= bit->pflag;
> > > > > +
> > > > > + err = pmbus_write_smbalert_mask(client, i, cat->reg, ~mask);
> > > > > + if (err)
> > > > > + dev_err(dev, "Failed to set smbalert for reg 0x%02x\n", cat->reg);
> > > >
> > > > This concerns me. It might mean that the chip does not support
> > > > PMBUS_SMBALERT_MASK. If so, there would be lots of error messages.
> > > After going through the PMBus specification, it appears that this should not
> > > be an issue unless there is a violation of the specification.
> >
> > PMBus chips have lots of issues which violate the specification.
> > Have a look at the various drivers and the workarounds implemented there.
> > You'll need to check if the command/register is supported before using it.
> > Also, if you want to keep the error message, make it dev_err_once().
> >
> > Either case, an error is an error, not to be ignored. An error here
> > should result in an error abort.
> Yes, I agree that PMBus chips can have issues that violate the
> specification, and that it is important to check whether a command or
> register is supported before using it.
> I have noticed that many drivers use the PMBUS_HAVE_* flags to expose the
> presence of specific registers, and I think it would be a good idea to add a
> PMBUS_HAVE_SMBALERT flag as well, so that drivers for supported chips can
> use it to determine whether they should set up an IRQ handler or not. If
> PMBUS_HAVE_SMBALERT is set, then the IRQ handler should be set up, otherwise
> it should be ignored.
> Will this approach be right?

Not really. PMBUS_HAVE_ flags are intended to indicate sensor register
support, not to indicate compliance problems. What you'd be looking for
would be the flags in struct pmbus_platform_data. However, those are only
intended to be used if registers/commands can not be auto-detected or if
doing so causes problems. See include/linux/pmbus.h for details.
Unless there is reason to believe that chips are misbehaving when trying
to read from or to set PMBUS_SMBALERT_MASK, we should stick with auto-
detection. After all, that is what pmbus_check_{status,byte,word}_register()
functions are for.

Thanks,
Guenter

Next message: Vladimir Oltean: "Re: [Patch net-next v6 09/13] net: dsa: microchip: ptp: move pdelay_rsp correction field to tail tag"
Previous message: Vipin Sharma: "Re: [Patch v3 1/9] KVM: x86/mmu: Repurpose KVM MMU shrinker to purge shadow page caches"
In reply to: Naresh Solanki: "Re: [PATCH RESEND v6 1/5] hwmon: (pmbus/core): Add interrupt support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]