[PATCH v4 01/10] dt-bindings: qcom,*-geni: move #{address,size}-cells on i2c/spi nodes

[Brian Masney]

Move the #address-cells and #size-cells properties on the existing
i2c/spi example nodes below the reg property so that all of the
address-related properties are grouped together.

Signed-off-by: Brian Masney <bmasney@xxxxxxxxxx>
Link: https://lore.kernel.org/lkml/Y6Wnh+tXPhF6aC1b@xxxxxxxxxxxxxxxxxxxx/
---
New patch introduced in v4

 .../devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml       | 4 ++--
 .../devicetree/bindings/soc/qcom/qcom,geni-se.yaml        | 4 ++--
 .../devicetree/bindings/spi/qcom,spi-geni-qcom.yaml       | 8 ++++----
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
index f5f7dc8f325c..594bf810a4aa 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -127,13 +127,13 @@ examples:
     i2c@88000 {
         compatible = "qcom,geni-i2c";
         reg = <0x00880000 0x4000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
         clock-names = "se";
         clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
         pinctrl-names = "default";
         pinctrl-0 = <&qup_i2c0_default>;
         interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
-        #address-cells = <1>;
-        #size-cells = <0>;
         interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
                         <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
                         <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index ab4df0205285..d6128fb7d361 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -137,14 +137,14 @@ examples:
             i2c0: i2c@a94000 {
                 compatible = "qcom,geni-i2c";
                 reg = <0 0xa94000 0 0x4000>;
+                #address-cells = <1>;
+                #size-cells = <0>;
                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
                 clock-names = "se";
                 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
                 pinctrl-names = "default", "sleep";
                 pinctrl-0 = <&qup_1_i2c_5_active>;
                 pinctrl-1 = <&qup_1_i2c_5_sleep>;
-                #address-cells = <1>;
-                #size-cells = <0>;
             };
 
             uart0: serial@a88000 {
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
index 2e20ca313ec1..efa7f52941f8 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
@@ -85,13 +85,13 @@ examples:
     spi@880000 {
         compatible = "qcom,geni-spi";
         reg = <0x00880000 0x4000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
         clock-names = "se";
         clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
         pinctrl-names = "default";
         pinctrl-0 = <&qup_spi0_default>;
         interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
-        #address-cells = <1>;
-        #size-cells = <0>;
         power-domains = <&rpmhpd SC7180_CX>;
         operating-points-v2 = <&qup_opp_table>;
         interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
@@ -105,6 +105,8 @@ examples:
     spi@884000 {
         compatible = "qcom,geni-spi";
         reg = <0x00884000 0x4000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
         clock-names = "se";
         clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
         dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
@@ -113,6 +115,4 @@ examples:
         pinctrl-names = "default";
         pinctrl-0 = <&qup_spi1_default>;
         interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
-        #address-cells = <1>;
-        #size-cells = <0>;
     };
-- 
2.39.0