[PATCH v4 03/10] arm64: dts: qcom: sc8280xp: rename qup2_uart17 to uart17

[Brian Masney]

In preparation for adding the missing SPI and I2C nodes to
sc8280xp.dtsi, it was decided to rename all of the existing qupX_
uart, spi, and i2c nodes to drop the qupX_ prefix. Let's go ahead
and rename qup2_uart17 to uart17. Note that some nodes are moved in the
file by this patch to preserve the expected sort order in the file.

Signed-off-by: Brian Masney <bmasney@xxxxxxxxxx>
Link: https://lore.kernel.org/lkml/20221212182314.1902632-1-bmasney@xxxxxxxxxx/
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Reviewed-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
No changes in v4

 arch/arm64/boot/dts/qcom/sa8295p-adp.dts  | 12 ++++++------
 arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 12 ++++++------
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 14 +++++++-------
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi    |  2 +-
 4 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 84cb6f3eeb56..61f2e44e70c1 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -17,7 +17,7 @@ / {
 	compatible = "qcom,sa8295p-adp", "qcom,sa8540p";
 
 	aliases {
-		serial0 = &qup2_uart17;
+		serial0 = &uart17;
 	};
 
 	chosen {
@@ -240,11 +240,6 @@ &qup2 {
 	status = "okay";
 };
 
-&qup2_uart17 {
-	compatible = "qcom,geni-debug-uart";
-	status = "okay";
-};
-
 &remoteproc_adsp {
 	firmware-name = "qcom/sa8540p/adsp.mbn";
 	status = "okay";
@@ -338,6 +333,11 @@ pm8450g_gpios: gpio@c000 {
 	};
 };
 
+&uart17 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
 
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
index d70859803fbd..d19af74f5057 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -17,7 +17,7 @@ / {
 	compatible = "qcom,sa8540p-ride", "qcom,sa8540p";
 
 	aliases {
-		serial0 = &qup2_uart17;
+		serial0 = &uart17;
 	};
 
 	chosen {
@@ -192,11 +192,6 @@ &qup2 {
 	status = "okay";
 };
 
-&qup2_uart17 {
-	compatible = "qcom,geni-debug-uart";
-	status = "okay";
-};
-
 &remoteproc_nsp0 {
 	firmware-name = "qcom/sa8540p/cdsp.mbn";
 	status = "okay";
@@ -207,6 +202,11 @@ &remoteproc_nsp1 {
 	status = "okay";
 };
 
+&uart17 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 551768f97729..db273face248 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -17,7 +17,7 @@ / {
 	compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp";
 
 	aliases {
-		serial0 = &qup2_uart17;
+		serial0 = &uart17;
 	};
 
 	backlight {
@@ -363,12 +363,6 @@ keyboard@68 {
 	};
 };
 
-&qup2_uart17 {
-	compatible = "qcom,geni-debug-uart";
-
-	status = "okay";
-};
-
 &remoteproc_adsp {
 	firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";
 
@@ -381,6 +375,12 @@ &remoteproc_nsp0 {
 	status = "okay";
 };
 
+&uart17 {
+	compatible = "qcom,geni-debug-uart";
+
+	status = "okay";
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index c0ffca9c9ddb..b8f567642551 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -813,7 +813,7 @@ qup2: geniqup@8c0000 {
 
 			status = "disabled";
 
-			qup2_uart17: serial@884000 {
+			uart17: serial@884000 {
 				compatible = "qcom,geni-uart";
 				reg = <0 0x00884000 0 0x4000>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
-- 
2.39.0