Re: [PATCH 2/3] arm64: dts: qcom: sm8550-mtp: enable display hardware

[Konrad Dybcio]

On 4.01.2023 10:18, Neil Armstrong wrote:
> Enable MDSS/DPU/DSI0 on SM8550-MTP device.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
> index 8586e16d6079..5b7e301cc2a2 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
> @@ -359,6 +359,28 @@ vreg_l3g_1p2: ldo3 {
>  	};
>  };
>  
> +&dispcc {
> +	status = "okay";
> +};
> +
> +&mdss {
> +	status = "okay";
> +};
> +
> +&mdss_dsi0 {
> +	vdda-supply = <&vreg_l3e_1p2>;
> +	status = "okay";
> +};
> +
> +&mdss_dsi0_phy {
> +	vdds-supply = <&vreg_l1e_0p88>;
> +	status = "okay";
> +};
> +
> +&mdss_mdp {
> +	status = "okay";
> +};
> +
>  &pm8550_gpios {
>  	sdc2_card_det_n: sdc2-card-det-state {
>  		pins = "gpio12";
>