Re: [PATCH v6 0/3] Improve CLOCK_EVT_FEAT_C3STOP feature setting

[Daniel Lezcano]

Hi Anup,

shall I pick the entire series or just the bindings and the driver changes ?


On 03/01/2023 15:10, Anup Patel wrote:
> This series improves the RISC-V timer driver to set CLOCK_EVT_FEAT_C3STOP
> feature based on RISC-V platform capabilities.
>
> These patches can also be found in riscv_timer_dt_imp_v6 branch at:
> https://github.com/avpatel/linux.git
>
> Changes since v5:
>   - Rebased on Linux-6.2-rc2
>
> Changes since v4:
>   - Update commit text of PATCH1 based on Samuel's comments
>   - Renamed DT property "riscv,timer-can-wake-cpu" to
>     "riscv,timer-cannot-wake-cpu" in PATCH2 and PATCH3
>   - Updated description of DT property "riscv,timer-cannot-wake-cpu"
>     in PATCH2
>
> Changes since v3:
>   - Rebased on Linux-6.1-rc7
>   - Replaced PATCH1 with a patch to initialize broadcast timer
>
> Changes since v2:
>   - Include Conor's revert patch as the first patch and rebased other patches
>   - Update PATCH2 to document bindings for separate RISC-V timer DT node
>   - Update PATCH3 based on RISC-V timer DT node bindings
>
> Changes since v1:
>   - Rebased on Linux-5.19-rc8
>   - Renamed "riscv,always-on" DT property to "riscv,timer-can-wake-cpu"
>
> Anup Patel (2):
>    dt-bindings: timer: Add bindings for the RISC-V timer device
>    clocksource: timer-riscv: Set CLOCK_EVT_FEAT_C3STOP based on DT
>
> Conor Dooley (1):
>    RISC-V: time: initialize hrtimer based broadcast clock event device
>
>   .../bindings/timer/riscv,timer.yaml           | 52 +++++++++++++++++++
>   arch/riscv/kernel/time.c                      |  3 ++
>   drivers/clocksource/timer-riscv.c             | 10 ++++
>   3 files changed, 65 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/timer/riscv,timer.yaml

--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog