[PATCH clocksource 5/6] clocksource: Suspend the watchdog temporarily when high read latency detected

[Paul E. McKenney]

From: Feng Tang <feng.tang@xxxxxxxxx>

Bugs have been reported on 8 sockets x86 machines in which the TSC was
wrongly disabled when the system is under heavy workload.

 [ 818.380354] clocksource: timekeeping watchdog on CPU336: hpet wd-wd read-back delay of 1203520ns
 [ 818.436160] clocksource: wd-tsc-wd read-back delay of 181880ns, clock-skew test skipped!
 [ 819.402962] clocksource: timekeeping watchdog on CPU338: hpet wd-wd read-back delay of 324000ns
 [ 819.448036] clocksource: wd-tsc-wd read-back delay of 337240ns, clock-skew test skipped!
 [ 819.880863] clocksource: timekeeping watchdog on CPU339: hpet read-back delay of 150280ns, attempt 3, marking unstable
 [ 819.936243] tsc: Marking TSC unstable due to clocksource watchdog
 [ 820.068173] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
 [ 820.092382] sched_clock: Marking unstable (818769414384, 1195404998)
 [ 820.643627] clocksource: Checking clocksource tsc synchronization from CPU 267 to CPUs 0,4,25,70,126,430,557,564.
 [ 821.067990] clocksource: Switched to clocksource hpet

This can be reproduced by running memory intensive 'stream' tests,
or some of the stress-ng subcases such as 'ioport'.

The reason for these issues is the when system is under heavy load, the
read latency of the clocksources can be very high.  Even lightweight TSC
reads can show high latencies, and latencies are much worse for external
clocksources such as HPET or the APIC PM timer.  These latencies can
result in false-positive clocksource-unstable determinations.

Given that the clocksource watchdog is a continual diagnostic check with
frequency of twice a second, there is no need to rush it when the system
is under heavy load.  Therefore, when high clocksource read latencies
are detected, suspend the watchdog timer for 5 minutes.

Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
Acked-by: Waiman Long <longman@xxxxxxxxxx>
Cc: John Stultz <jstultz@xxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
Cc: Feng Tang <feng.tang@xxxxxxxxx>
Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxx>
---
 kernel/time/clocksource.c | 45 ++++++++++++++++++++++++++++-----------
 1 file changed, 32 insertions(+), 13 deletions(-)

diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index fc486cd972635..91836b727cef5 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -387,6 +387,15 @@ void clocksource_verify_percpu(struct clocksource *cs)
 }
 EXPORT_SYMBOL_GPL(clocksource_verify_percpu);
 
+static inline void clocksource_reset_watchdog(void)
+{
+	struct clocksource *cs;
+
+	list_for_each_entry(cs, &watchdog_list, wd_list)
+		cs->flags &= ~CLOCK_SOURCE_WATCHDOG;
+}
+
+
 static void clocksource_watchdog(struct timer_list *unused)
 {
 	u64 csnow, wdnow, cslast, wdlast, delta;
@@ -394,6 +403,7 @@ static void clocksource_watchdog(struct timer_list *unused)
 	int64_t wd_nsec, cs_nsec;
 	struct clocksource *cs;
 	enum wd_read_status read_ret;
+	unsigned long extra_wait = 0;
 	u32 md;
 
 	spin_lock(&watchdog_lock);
@@ -413,13 +423,30 @@ static void clocksource_watchdog(struct timer_list *unused)
 
 		read_ret = cs_watchdog_read(cs, &csnow, &wdnow);
 
-		if (read_ret != WD_READ_SUCCESS) {
-			if (read_ret == WD_READ_UNSTABLE)
-				/* Clock readout unreliable, so give it up. */
-				__clocksource_unstable(cs);
+		if (read_ret == WD_READ_UNSTABLE) {
+			/* Clock readout unreliable, so give it up. */
+			__clocksource_unstable(cs);
 			continue;
 		}
 
+		/*
+		 * When WD_READ_SKIP is returned, it means the system is likely
+		 * under very heavy load, where the latency of reading
+		 * watchdog/clocksource is very big, and affect the accuracy of
+		 * watchdog check. So give system some space and suspend the
+		 * watchdog check for 5 minutes.
+		 */
+		if (read_ret == WD_READ_SKIP) {
+			/*
+			 * As the watchdog timer will be suspended, and
+			 * cs->last could keep unchanged for 5 minutes, reset
+			 * the counters.
+			 */
+			clocksource_reset_watchdog();
+			extra_wait = HZ * 300;
+			break;
+		}
+
 		/* Clocksource initialized ? */
 		if (!(cs->flags & CLOCK_SOURCE_WATCHDOG) ||
 		    atomic_read(&watchdog_reset_pending)) {
@@ -523,7 +550,7 @@ static void clocksource_watchdog(struct timer_list *unused)
 	 * pair clocksource_stop_watchdog() clocksource_start_watchdog().
 	 */
 	if (!timer_pending(&watchdog_timer)) {
-		watchdog_timer.expires += WATCHDOG_INTERVAL;
+		watchdog_timer.expires += WATCHDOG_INTERVAL + extra_wait;
 		add_timer_on(&watchdog_timer, next_cpu);
 	}
 out:
@@ -548,14 +575,6 @@ static inline void clocksource_stop_watchdog(void)
 	watchdog_running = 0;
 }
 
-static inline void clocksource_reset_watchdog(void)
-{
-	struct clocksource *cs;
-
-	list_for_each_entry(cs, &watchdog_list, wd_list)
-		cs->flags &= ~CLOCK_SOURCE_WATCHDOG;
-}
-
 static void clocksource_resume_watchdog(void)
 {
 	atomic_inc(&watchdog_reset_pending);
-- 
2.31.1.189.g2e36527f23