Re: [PATCH v3 4/5] nvmem: core: fix cleanup after dev_set_name()

[Dan Carpenter]

On Tue, Jan 03, 2023 at 04:59:32PM +0000, Russell King (Oracle) wrote:
> If dev_set_name() fails, we leak nvmem->wp_gpio as the cleanup does not
> put this. While a minimal fix for this would be to add the gpiod_put()
> call, we can do better if we split device_register(), and use the
> tested nvmem_release() cleanup code by initialising the device early,
> and putting the device.
> 
> This results in a slightly larger fix, but results in clear code.
> 
> Note: this patch depends on "nvmem: core: initialise nvmem->id early"
> and "nvmem: core: remove nvmem_config wp_gpio".
> 
> Fixes: 5544e90c8126 ("nvmem: core: add error handling for dev_set_name")
> Signed-off-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>
> ---
>  drivers/nvmem/core.c | 26 +++++++++++---------------
>  1 file changed, 11 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
> index 843e2f5696e6..19497f555e07 100644
> --- a/drivers/nvmem/core.c
> +++ b/drivers/nvmem/core.c
> @@ -772,15 +772,17 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
>  
>  	nvmem->id = rval;
>  
> +	nvmem->dev.type = &nvmem_provider_type;
> +	nvmem->dev.bus = &nvmem_bus_type;
> +	nvmem->dev.parent = config->dev;
> +
> +	device_initialize(&nvmem->dev);
> +
>  	if (!config->ignore_wp)
>  		nvmem->wp_gpio = gpiod_get_optional(config->dev, "wp",
>  						    GPIOD_OUT_HIGH);
> -	if (IS_ERR(nvmem->wp_gpio)) {
> -		ida_free(&nvmem_ida, nvmem->id);
> -		rval = PTR_ERR(nvmem->wp_gpio);
> -		kfree(nvmem);
> -		return ERR_PTR(rval);
> -	}
> +	if (IS_ERR(nvmem->wp_gpio))
> +		goto err_put_device;
>  

Missing error code.  It still needs the rval = PTR_ERR(nvmem->wp_gpio);

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@xxxxxxxxx>
| Reported-by: Dan Carpenter <error27@xxxxxxxxx>

regards,
dan carpenter